cyclades: use tty_port

Switch cyclades to use the new tty_port structure

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index a957dbcc5a463502f45ea3d10641e77e53c591de..0144b19d10361b9081f7d48cb09fc8cf769ee87d 100644 (file)
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -762,7 +762,7 @@ static int cy_next_channel; /* next minor available */
 /*
  * This is used to look up the divisor speeds and the timeouts
  * We're normally limited to 15 distinct baud rates.  The extra
- * are accessed via settings in info->flags.
+ * are accessed via settings in info->port.flags.
  *      0,     1,     2,     3,     4,     5,     6,     7,     8,     9,
  *     10,    11,    12,    13,    14,    15,    16,    17,    18,    19,
  *                                               HI            VHI
@@ -1003,7 +1003,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
        cy_writeb(base_addr + (CyCAR << index), save_xir);
 
        /* if there is nowhere to put the data, discard it */
-       if (info->tty == NULL) {
+       if (info->port.tty == NULL) {
                if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
                                CyIVRRxEx) {    /* exception */
                        data = readb(base_addr + (CyRDSR << index));
@@ -1015,7 +1015,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
                goto end;
        }
        /* there is an open port for this data */
-       tty = info->tty;
+       tty = info->port.tty;
        if ((readb(base_addr + (CyRIVR << index)) & CyIVRMask) ==
                        CyIVRRxEx) {    /* exception */
                data = readb(base_addr + (CyRDSR << index));
@@ -1041,7 +1041,7 @@ static void cyy_chip_rx(struct cyclades_card *cinfo, int chip,
                                                readb(base_addr + (CyRDSR <<
                                                        index)), TTY_BREAK);
                                        info->icount.rx++;
-                                       if (info->flags & ASYNC_SAK)
+                                       if (info->port.flags & ASYNC_SAK)
                                                do_SAK(tty);
                                } else if (data & CyFRAME) {
                                        tty_insert_flip_char(tty,
@@ -1145,7 +1145,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
                goto end;
        }
        info = &cinfo->ports[channel + chip * 4];
-       if (info->tty == NULL) {
+       if (info->port.tty == NULL) {
                cy_writeb(base_addr + (CySRER << index),
                          readb(base_addr + (CySRER << index)) & ~CyTxRdy);
                goto end;
@@ -1190,13 +1190,13 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
                        }
                        goto done;
                }
-               if (info->xmit_buf == NULL) {
+               if (info->port.xmit_buf == NULL) {
                        cy_writeb(base_addr + (CySRER << index),
                                readb(base_addr + (CySRER << index)) &
                                        ~CyTxRdy);
                        goto done;
                }
-               if (info->tty->stopped || info->tty->hw_stopped) {
+               if (info->port.tty->stopped || info->port.tty->hw_stopped) {
                        cy_writeb(base_addr + (CySRER << index),
                                readb(base_addr + (CySRER << index)) &
                                        ~CyTxRdy);
@@ -1211,7 +1211,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
                 * character. This is necessary because there may not be room
                 * for the two chars needed to send a NULL.)
                 */
-               outch = info->xmit_buf[info->xmit_tail];
+               outch = info->port.xmit_buf[info->xmit_tail];
                if (outch) {
                        info->xmit_cnt--;
                        info->xmit_tail = (info->xmit_tail + 1) &
@@ -1232,7 +1232,7 @@ static void cyy_chip_tx(struct cyclades_card *cinfo, unsigned int chip,
        }
 
 done:
-       tty_wakeup(info->tty);
+       tty_wakeup(info->port.tty);
 end:
        /* end of service */
        cy_writeb(base_addr + (CyTIR << index), save_xir & 0x3f);
@@ -1256,7 +1256,7 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
        mdm_change = readb(base_addr + (CyMISR << index));
        mdm_status = readb(base_addr + (CyMSVR1 << index));
 
-       if (!info->tty)
+       if (!info->port.tty)
                goto end;
 
        if (mdm_change & CyANY_DELTA) {
@@ -1273,29 +1273,29 @@ static void cyy_chip_modem(struct cyclades_card *cinfo, int chip,
                wake_up_interruptible(&info->delta_msr_wait);
        }
 
-       if ((mdm_change & CyDCD) && (info->flags & ASYNC_CHECK_CD)) {
+       if ((mdm_change & CyDCD) && (info->port.flags & ASYNC_CHECK_CD)) {
                if (!(mdm_status & CyDCD)) {
-                       tty_hangup(info->tty);
-                       info->flags &= ~ASYNC_NORMAL_ACTIVE;
+                       tty_hangup(info->port.tty);
+                       info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
                }
-               wake_up_interruptible(&info->open_wait);
+               wake_up_interruptible(&info->port.open_wait);
        }
-       if ((mdm_change & CyCTS) && (info->flags & ASYNC_CTS_FLOW)) {
-               if (info->tty->hw_stopped) {
+       if ((mdm_change & CyCTS) && (info->port.flags & ASYNC_CTS_FLOW)) {
+               if (info->port.tty->hw_stopped) {
                        if (mdm_status & CyCTS) {
                                /* cy_start isn't used
                                   because... !!! */
-                               info->tty->hw_stopped = 0;
+                               info->port.tty->hw_stopped = 0;
                                cy_writeb(base_addr + (CySRER << index),
                                        readb(base_addr + (CySRER << index)) |
                                                CyTxRdy);
-                               tty_wakeup(info->tty);
+                               tty_wakeup(info->port.tty);
                        }
                } else {
                        if (!(mdm_status & CyCTS)) {
                                /* cy_stop isn't used
                                   because ... !!! */
-                               info->tty->hw_stopped = 1;
+                               info->port.tty->hw_stopped = 1;
                                cy_writeb(base_addr + (CySRER << index),
                                        readb(base_addr + (CySRER << index)) &
                                                ~CyTxRdy);
@@ -1449,7 +1449,7 @@ static void cyz_handle_rx(struct cyclades_port *info,
                struct BUF_CTRL __iomem *buf_ctrl)
 {
        struct cyclades_card *cinfo = info->card;
-       struct tty_struct *tty = info->tty;
+       struct tty_struct *tty = info->port.tty;
        unsigned int char_count;
        int len;
 #ifdef BLOCKMOVE
@@ -1542,7 +1542,7 @@ static void cyz_handle_tx(struct cyclades_port *info,
                struct BUF_CTRL __iomem *buf_ctrl)
 {
        struct cyclades_card *cinfo = info->card;
-       struct tty_struct *tty = info->tty;
+       struct tty_struct *tty = info->port.tty;
        u8 data;
        unsigned int char_count;
 #ifdef BLOCKMOVE
@@ -1585,7 +1585,7 @@ static void cyz_handle_tx(struct cyclades_port *info,
 
                        memcpy_toio((char *)(cinfo->base_addr + tx_bufaddr +
                                        tx_put),
-                                       &info->xmit_buf[info->xmit_tail],
+                                       &info->port.xmit_buf[info->xmit_tail],
                                        small_count);
 
                        tx_put = (tx_put + small_count) & (tx_bufsize - 1);
@@ -1597,7 +1597,7 @@ static void cyz_handle_tx(struct cyclades_port *info,
                }
 #else
                while (info->xmit_cnt && char_count) {
-                       data = info->xmit_buf[info->xmit_tail];
+                       data = info->port.xmit_buf[info->xmit_tail];
                        info->xmit_cnt--;
                        info->xmit_tail = (info->xmit_tail + 1) &
                                        (SERIAL_XMIT_SIZE - 1);
@@ -1642,7 +1642,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
                special_count = 0;
                delta_count = 0;
                info = &cinfo->ports[channel];
-               tty = info->tty;
+               tty = info->port.tty;
                if (tty == NULL)
                        continue;
 
@@ -1668,15 +1668,15 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
                case C_CM_MDCD:
                        info->icount.dcd++;
                        delta_count++;
-                       if (info->flags & ASYNC_CHECK_CD) {
+                       if (info->port.flags & ASYNC_CHECK_CD) {
                                if ((fw_ver > 241 ? ((u_long) param) :
                                                readl(&ch_ctrl->rs_status)) &
                                                C_RS_DCD) {
-                                       wake_up_interruptible(&info->open_wait);
+                                       wake_up_interruptible(&info->port.open_wait);
                                } else {
-                                       tty_hangup(info->tty);
-                                       wake_up_interruptible(&info->open_wait);
-                                       info->flags &= ~ASYNC_NORMAL_ACTIVE;
+                                       tty_hangup(info->port.tty);
+                                       wake_up_interruptible(&info->port.open_wait);
+                                       info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
                                }
                        }
                        break;
@@ -1814,7 +1814,7 @@ static void cyz_poll(unsigned long arg)
 
                for (port = 0; port < cinfo->nports; port++) {
                        info = &cinfo->ports[port];
-                       tty = info->tty;
+                       tty = info->port.tty;
                        buf_ctrl = &(zfw_ctrl->buf_ctrl[port]);
 
                        if (!info->throttle)
@@ -1853,22 +1853,22 @@ static int startup(struct cyclades_port *info)
 
        spin_lock_irqsave(&card->card_lock, flags);
 
-       if (info->flags & ASYNC_INITIALIZED) {
+       if (info->port.flags & ASYNC_INITIALIZED) {
                free_page(page);
                goto errout;
        }
 
        if (!info->type) {
-               if (info->tty)
-                       set_bit(TTY_IO_ERROR, &info->tty->flags);
+               if (info->port.tty)
+                       set_bit(TTY_IO_ERROR, &info->port.tty->flags);
                free_page(page);
                goto errout;
        }
 
-       if (info->xmit_buf)
+       if (info->port.xmit_buf)
                free_page(page);
        else
-               info->xmit_buf = (unsigned char *)page;
+               info->port.xmit_buf = (unsigned char *)page;
 
        spin_unlock_irqrestore(&card->card_lock, flags);
 
@@ -1909,10 +1909,10 @@ static int startup(struct cyclades_port *info)
 
                cy_writeb(base_addr + (CySRER << index),
                        readb(base_addr + (CySRER << index)) | CyRxData);
-               info->flags |= ASYNC_INITIALIZED;
+               info->port.flags |= ASYNC_INITIALIZED;
 
-               if (info->tty)
-                       clear_bit(TTY_IO_ERROR, &info->tty->flags);
+               if (info->port.tty)
+                       clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
                info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
                info->breakon = info->breakoff = 0;
                memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
@@ -1994,9 +1994,9 @@ static int startup(struct cyclades_port *info)
 
                /* enable send, recv, modem !!! */
 
-               info->flags |= ASYNC_INITIALIZED;
-               if (info->tty)
-                       clear_bit(TTY_IO_ERROR, &info->tty->flags);
+               info->port.flags |= ASYNC_INITIALIZED;
+               if (info->port.tty)
+                       clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
                info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
                info->breakon = info->breakoff = 0;
                memset((char *)&info->idle_stats, 0, sizeof(info->idle_stats));
@@ -2065,7 +2065,7 @@ static void shutdown(struct cyclades_port *info)
        void __iomem *base_addr;
        int chip, channel, index;
 
-       if (!(info->flags & ASYNC_INITIALIZED))
+       if (!(info->port.flags & ASYNC_INITIALIZED))
                return;
 
        card = info->card;
@@ -2087,14 +2087,14 @@ static void shutdown(struct cyclades_port *info)
                /* Clear delta_msr_wait queue to avoid mem leaks. */
                wake_up_interruptible(&info->delta_msr_wait);
 
-               if (info->xmit_buf) {
+               if (info->port.xmit_buf) {
                        unsigned char *temp;
-                       temp = info->xmit_buf;
-                       info->xmit_buf = NULL;
+                       temp = info->port.xmit_buf;
+                       info->port.xmit_buf = NULL;
                        free_page((unsigned long)temp);
                }
                cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
-               if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+               if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
                        cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
                        cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
 #ifdef CY_DEBUG_DTR
@@ -2108,9 +2108,9 @@ static void shutdown(struct cyclades_port *info)
                /* it may be appropriate to clear _XMIT at
                   some later date (after testing)!!! */
 
-               if (info->tty)
-                       set_bit(TTY_IO_ERROR, &info->tty->flags);
-               info->flags &= ~ASYNC_INITIALIZED;
+               if (info->port.tty)
+                       set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+               info->port.flags &= ~ASYNC_INITIALIZED;
                spin_unlock_irqrestore(&card->card_lock, flags);
        } else {
                struct FIRM_ID __iomem *firm_id;
@@ -2136,14 +2136,14 @@ static void shutdown(struct cyclades_port *info)
 
                spin_lock_irqsave(&card->card_lock, flags);
 
-               if (info->xmit_buf) {
+               if (info->port.xmit_buf) {
                        unsigned char *temp;
-                       temp = info->xmit_buf;
-                       info->xmit_buf = NULL;
+                       temp = info->port.xmit_buf;
+                       info->port.xmit_buf = NULL;
                        free_page((unsigned long)temp);
                }
 
-               if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+               if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) {
                        cy_writel(&ch_ctrl[channel].rs_control,
                                (__u32)(readl(&ch_ctrl[channel].rs_control) &
                                        ~(C_RS_RTS | C_RS_DTR)));
@@ -2158,9 +2158,9 @@ static void shutdown(struct cyclades_port *info)
 #endif
                }
 
-               if (info->tty)
-                       set_bit(TTY_IO_ERROR, &info->tty->flags);
-               info->flags &= ~ASYNC_INITIALIZED;
+               if (info->port.tty)
+                       set_bit(TTY_IO_ERROR, &info->port.tty->flags);
+               info->port.flags &= ~ASYNC_INITIALIZED;
 
                spin_unlock_irqrestore(&card->card_lock, flags);
        }
@@ -2194,10 +2194,10 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
         * If the device is in the middle of being closed, then block
         * until it's done, and then try again.
         */
-       if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
-               wait_event_interruptible(info->close_wait,
-                               !(info->flags & ASYNC_CLOSING));
-               return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
+       if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
+               wait_event_interruptible(info->port.close_wait,
+                               !(info->port.flags & ASYNC_CLOSING));
+               return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
        }
 
        /*
@@ -2206,32 +2206,32 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
         */
        if ((filp->f_flags & O_NONBLOCK) ||
                                        (tty->flags & (1 << TTY_IO_ERROR))) {
-               info->flags |= ASYNC_NORMAL_ACTIVE;
+               info->port.flags |= ASYNC_NORMAL_ACTIVE;
                return 0;
        }
 
        /*
         * Block waiting for the carrier detect and the line to become
         * free (i.e., not in use by the callout).  While we are in
-        * this loop, info->count is dropped by one, so that
+        * this loop, info->port.count is dropped by one, so that
         * cy_close() knows when to free things.  We restore it upon
         * exit, either normal or abnormal.
         */
        retval = 0;
-       add_wait_queue(&info->open_wait, &wait);
+       add_wait_queue(&info->port.open_wait, &wait);
 #ifdef CY_DEBUG_OPEN
        printk(KERN_DEBUG "cyc block_til_ready before block: ttyC%d, "
-               "count = %d\n", info->line, info->count);
+               "count = %d\n", info->line, info->port.count);
 #endif
        spin_lock_irqsave(&cinfo->card_lock, flags);
        if (!tty_hung_up_p(filp))
-               info->count--;
+               info->port.count--;
        spin_unlock_irqrestore(&cinfo->card_lock, flags);
 #ifdef CY_DEBUG_COUNT
        printk(KERN_DEBUG "cyc block_til_ready: (%d): decrementing count to "
-               "%d\n", current->pid, info->count);
+               "%d\n", current->pid, info->port.count);
 #endif
-       info->blocked_open++;
+       info->port.blocked_open++;
 
        if (!IS_CYC_Z(*cinfo)) {
                chip = channel >> 2;
@@ -2260,8 +2260,8 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
 
                        set_current_state(TASK_INTERRUPTIBLE);
                        if (tty_hung_up_p(filp) ||
-                                       !(info->flags & ASYNC_INITIALIZED)) {
-                               retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+                                       !(info->port.flags & ASYNC_INITIALIZED)) {
+                               retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
                                          -EAGAIN : -ERESTARTSYS);
                                break;
                        }
@@ -2269,7 +2269,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
                        spin_lock_irqsave(&cinfo->card_lock, flags);
                        cy_writeb(base_addr + (CyCAR << index),
                                  (u_char) channel);
-                       if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
+                       if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
                                        (readb(base_addr +
                                                (CyMSVR1 << index)) & CyDCD))) {
                                spin_unlock_irqrestore(&cinfo->card_lock, flags);
@@ -2284,7 +2284,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
 #ifdef CY_DEBUG_OPEN
                        printk(KERN_DEBUG "cyc block_til_ready blocking: "
                                "ttyC%d, count = %d\n",
-                               info->line, info->count);
+                               info->line, info->port.count);
 #endif
                        schedule();
                }
@@ -2298,7 +2298,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
                firm_id = base_addr + ID_ADDRESS;
                if (!ISZLOADED(*cinfo)) {
                        __set_current_state(TASK_RUNNING);
-                       remove_wait_queue(&info->open_wait, &wait);
+                       remove_wait_queue(&info->port.open_wait, &wait);
                        return -EINVAL;
                }
 
@@ -2327,12 +2327,12 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
 
                        set_current_state(TASK_INTERRUPTIBLE);
                        if (tty_hung_up_p(filp) ||
-                                       !(info->flags & ASYNC_INITIALIZED)) {
-                               retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+                                       !(info->port.flags & ASYNC_INITIALIZED)) {
+                               retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
                                          -EAGAIN : -ERESTARTSYS);
                                break;
                        }
-                       if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
+                       if (!(info->port.flags & ASYNC_CLOSING) && (C_CLOCAL(tty) ||
                                        (readl(&ch_ctrl[channel].rs_status) &
                                                C_RS_DCD))) {
                                break;
@@ -2344,28 +2344,28 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
 #ifdef CY_DEBUG_OPEN
                        printk(KERN_DEBUG "cyc block_til_ready blocking: "
                                "ttyC%d, count = %d\n",
-                               info->line, info->count);
+                               info->line, info->port.count);
 #endif
                        schedule();
                }
        }
        __set_current_state(TASK_RUNNING);
-       remove_wait_queue(&info->open_wait, &wait);
+       remove_wait_queue(&info->port.open_wait, &wait);
        if (!tty_hung_up_p(filp)) {
-               info->count++;
+               info->port.count++;
 #ifdef CY_DEBUG_COUNT
                printk(KERN_DEBUG "cyc:block_til_ready (%d): incrementing "
-                       "count to %d\n", current->pid, info->count);
+                       "count to %d\n", current->pid, info->port.count);
 #endif
        }
-       info->blocked_open--;
+       info->port.blocked_open--;
 #ifdef CY_DEBUG_OPEN
        printk(KERN_DEBUG "cyc:block_til_ready after blocking: ttyC%d, "
-               "count = %d\n", info->line, info->count);
+               "count = %d\n", info->line, info->port.count);
 #endif
        if (retval)
                return retval;
-       info->flags |= ASYNC_NORMAL_ACTIVE;
+       info->port.flags |= ASYNC_NORMAL_ACTIVE;
        return 0;
 }                              /* block_til_ready */
 
@@ -2456,27 +2456,27 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
        printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line);
 #endif
        tty->driver_data = info;
-       info->tty = tty;
+       info->port.tty = tty;
        if (serial_paranoia_check(info, tty->name, "cy_open"))
                return -ENODEV;
 
 #ifdef CY_DEBUG_OPEN
        printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line,
-                       info->count);
+                       info->port.count);
 #endif
-       info->count++;
+       info->port.count++;
 #ifdef CY_DEBUG_COUNT
        printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n",
-               current->pid, info->count);
+               current->pid, info->port.count);
 #endif
 
        /*
         * If the port is the middle of closing, bail out now
         */
-       if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
-               wait_event_interruptible(info->close_wait,
-                               !(info->flags & ASYNC_CLOSING));
-               return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
+       if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) {
+               wait_event_interruptible(info->port.close_wait,
+                               !(info->port.flags & ASYNC_CLOSING));
+               return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS;
        }
 
        /*
@@ -2641,9 +2641,9 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
        }
 #ifdef CY_DEBUG_OPEN
        printk(KERN_DEBUG "cyc:cy_close ttyC%d, count = %d\n", info->line,
-               info->count);
+               info->port.count);
 #endif
-       if ((tty->count == 1) && (info->count != 1)) {
+       if ((tty->count == 1) && (info->port.count != 1)) {
                /*
                 * Uh, oh.  tty->count is 1, which means that the tty
                 * structure will be freed.  Info->count should always
@@ -2652,24 +2652,24 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
                 * serial port won't be shutdown.
                 */
                printk(KERN_ERR "cyc:cy_close: bad serial port count; "
-                       "tty->count is 1, info->count is %d\n", info->count);
-               info->count = 1;
+                       "tty->count is 1, info->port.count is %d\n", info->port.count);
+               info->port.count = 1;
        }
 #ifdef CY_DEBUG_COUNT
        printk(KERN_DEBUG  "cyc:cy_close at (%d): decrementing count to %d\n",
-               current->pid, info->count - 1);
+               current->pid, info->port.count - 1);
 #endif
-       if (--info->count < 0) {
+       if (--info->port.count < 0) {
 #ifdef CY_DEBUG_COUNT
                printk(KERN_DEBUG "cyc:cyc_close setting count to 0\n");
 #endif
-               info->count = 0;
+               info->port.count = 0;
        }
-       if (info->count) {
+       if (info->port.count) {
                spin_unlock_irqrestore(&card->card_lock, flags);
                return;
        }
-       info->flags |= ASYNC_CLOSING;
+       info->port.flags |= ASYNC_CLOSING;
 
        /*
         * Now we wait for the transmit buffer to clear; and we notify
@@ -2692,7 +2692,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
                cy_writeb(base_addr + (CyCAR << index), (u_char) channel);
                cy_writeb(base_addr + (CySRER << index),
                          readb(base_addr + (CySRER << index)) & ~CyRxData);
-               if (info->flags & ASYNC_INITIALIZED) {
+               if (info->port.flags & ASYNC_INITIALIZED) {
                        /* Waiting for on-board buffers to be empty before
                           closing the port */
                        spin_unlock_irqrestore(&card->card_lock, flags);
@@ -2731,18 +2731,18 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
        spin_lock_irqsave(&card->card_lock, flags);
 
        tty->closing = 0;
-       info->tty = NULL;
-       if (info->blocked_open) {
+       info->port.tty = NULL;
+       if (info->port.blocked_open) {
                spin_unlock_irqrestore(&card->card_lock, flags);
                if (info->close_delay) {
                        msleep_interruptible(jiffies_to_msecs
                                                (info->close_delay));
                }
-               wake_up_interruptible(&info->open_wait);
+               wake_up_interruptible(&info->port.open_wait);
                spin_lock_irqsave(&card->card_lock, flags);
        }
-       info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
-       wake_up_interruptible(&info->close_wait);
+       info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+       wake_up_interruptible(&info->port.close_wait);
 
 #ifdef CY_DEBUG_OTHER
        printk(KERN_DEBUG "cyc:cy_close done\n");
@@ -2777,7 +2777,7 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
        if (serial_paranoia_check(info, tty->name, "cy_write"))
                return 0;
 
-       if (!info->xmit_buf)
+       if (!info->port.xmit_buf)
                return 0;
 
        spin_lock_irqsave(&info->card->card_lock, flags);
@@ -2788,7 +2788,7 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
                if (c <= 0)
                        break;
 
-               memcpy(info->xmit_buf + info->xmit_head, buf, c);
+               memcpy(info->port.xmit_buf + info->xmit_head, buf, c);
                info->xmit_head = (info->xmit_head + c) &
                        (SERIAL_XMIT_SIZE - 1);
                info->xmit_cnt += c;
@@ -2826,7 +2826,7 @@ static int cy_put_char(struct tty_struct *tty, unsigned char ch)
        if (serial_paranoia_check(info, tty->name, "cy_put_char"))
                return 0;
 
-       if (!info->xmit_buf)
+       if (!info->port.xmit_buf)
                return 0;
 
        spin_lock_irqsave(&info->card->card_lock, flags);
@@ -2835,7 +2835,7 @@ static int cy_put_char(struct tty_struct *tty, unsigned char ch)
                return 0;
        }
 
-       info->xmit_buf[info->xmit_head++] = ch;
+       info->port.xmit_buf[info->xmit_head++] = ch;
        info->xmit_head &= SERIAL_XMIT_SIZE - 1;
        info->xmit_cnt++;
        info->idle_stats.xmit_bytes++;
@@ -2860,7 +2860,7 @@ static void cy_flush_chars(struct tty_struct *tty)
                return;
 
        if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
-                       !info->xmit_buf)
+                       !info->port.xmit_buf)
                return;
 
        start_xmit(info);
@@ -2988,27 +2988,27 @@ static void set_line_char(struct cyclades_port *info)
        int baud, baud_rate = 0;
        int i;
 
-       if (!info->tty || !info->tty->termios)
+       if (!info->port.tty || !info->port.tty->termios)
                return;
 
        if (info->line == -1)
                return;
 
-       cflag = info->tty->termios->c_cflag;
-       iflag = info->tty->termios->c_iflag;
+       cflag = info->port.tty->termios->c_cflag;
+       iflag = info->port.tty->termios->c_iflag;
 
        /*
         * Set up the tty->alt_speed kludge
         */
-       if (info->tty) {
-               if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-                       info->tty->alt_speed = 57600;
-               if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-                       info->tty->alt_speed = 115200;
-               if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-                       info->tty->alt_speed = 230400;
-               if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-                       info->tty->alt_speed = 460800;
+       if (info->port.tty) {
+               if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+                       info->port.tty->alt_speed = 57600;
+               if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+                       info->port.tty->alt_speed = 115200;
+               if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+                       info->port.tty->alt_speed = 230400;
+               if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+                       info->port.tty->alt_speed = 460800;
        }
 
        card = info->card;
@@ -3020,8 +3020,8 @@ static void set_line_char(struct cyclades_port *info)
                index = card->bus_index;
 
                /* baud rate */
-               baud = tty_get_baud_rate(info->tty);
-               if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+               baud = tty_get_baud_rate(info->port.tty);
+               if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
                                ASYNC_SPD_CUST) {
                        if (info->custom_divisor)
                                baud_rate = info->baud / info->custom_divisor;
@@ -3038,7 +3038,7 @@ static void set_line_char(struct cyclades_port *info)
                if (i == 20)
                        i = 19; /* CD1400_MAX_SPEED */
 
-               if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+               if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
                                ASYNC_SPD_CUST) {
                        cyy_baud_calc(info, baud_rate);
                } else {
@@ -3059,7 +3059,7 @@ static void set_line_char(struct cyclades_port *info)
                        /* get it right for 134.5 baud */
                        info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
                                        2;
-               } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+               } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
                                ASYNC_SPD_CUST) {
                        info->timeout = (info->xmit_fifo_size * HZ * 15 /
                                        baud_rate) + 2;
@@ -3108,16 +3108,16 @@ static void set_line_char(struct cyclades_port *info)
 
                /* CTS flow control flag */
                if (cflag & CRTSCTS) {
-                       info->flags |= ASYNC_CTS_FLOW;
+                       info->port.flags |= ASYNC_CTS_FLOW;
                        info->cor2 |= CyCtsAE;
                } else {
-                       info->flags &= ~ASYNC_CTS_FLOW;
+                       info->port.flags &= ~ASYNC_CTS_FLOW;
                        info->cor2 &= ~CyCtsAE;
                }
                if (cflag & CLOCAL)
-                       info->flags &= ~ASYNC_CHECK_CD;
+                       info->port.flags &= ~ASYNC_CHECK_CD;
                else
-                       info->flags |= ASYNC_CHECK_CD;
+                       info->port.flags |= ASYNC_CHECK_CD;
 
         /***********************************************
            The hardware option, CyRtsAO, presents RTS when
@@ -3146,8 +3146,8 @@ static void set_line_char(struct cyclades_port *info)
                /* set line characteristics  according configuration */
 
                cy_writeb(base_addr + (CySCHR1 << index),
-                         START_CHAR(info->tty));
-               cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->tty));
+                         START_CHAR(info->port.tty));
+               cy_writeb(base_addr + (CySCHR2 << index), STOP_CHAR(info->port.tty));
                cy_writeb(base_addr + (CyCOR1 << index), info->cor1);
                cy_writeb(base_addr + (CyCOR2 << index), info->cor2);
                cy_writeb(base_addr + (CyCOR3 << index), info->cor3);
@@ -3163,7 +3163,7 @@ static void set_line_char(struct cyclades_port *info)
                        (info->default_timeout ? info->default_timeout : 0x02));
                /* 10ms rx timeout */
 
-               if (C_CLOCAL(info->tty)) {
+               if (C_CLOCAL(info->port.tty)) {
                        /* without modem intr */
                        cy_writeb(base_addr + (CySRER << index),
                                readb(base_addr + (CySRER << index)) | CyMdmCh);
@@ -3226,8 +3226,8 @@ static void set_line_char(struct cyclades_port *info)
 #endif
                }
 
-               if (info->tty)
-                       clear_bit(TTY_IO_ERROR, &info->tty->flags);
+               if (info->port.tty)
+                       clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
                spin_unlock_irqrestore(&card->card_lock, flags);
 
        } else {
@@ -3250,8 +3250,8 @@ static void set_line_char(struct cyclades_port *info)
                buf_ctrl = &zfw_ctrl->buf_ctrl[channel];
 
                /* baud rate */
-               baud = tty_get_baud_rate(info->tty);
-               if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+               baud = tty_get_baud_rate(info->port.tty);
+               if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
                                ASYNC_SPD_CUST) {
                        if (info->custom_divisor)
                                baud_rate = info->baud / info->custom_divisor;
@@ -3266,7 +3266,7 @@ static void set_line_char(struct cyclades_port *info)
                        /* get it right for 134.5 baud */
                        info->timeout = (info->xmit_fifo_size * HZ * 30 / 269) +
                                        2;
-               } else if (baud == 38400 && (info->flags & ASYNC_SPD_MASK) ==
+               } else if (baud == 38400 && (info->port.flags & ASYNC_SPD_MASK) ==
                                ASYNC_SPD_CUST) {
                        info->timeout = (info->xmit_fifo_size * HZ * 15 /
                                        baud_rate) + 2;
@@ -3318,7 +3318,7 @@ static void set_line_char(struct cyclades_port *info)
                }
                /* As the HW flow control is done in firmware, the driver
                   doesn't need to care about it */
-               info->flags &= ~ASYNC_CTS_FLOW;
+               info->port.flags &= ~ASYNC_CTS_FLOW;
 
                /* XON/XOFF/XANY flow control flags */
                sw_flow = 0;
@@ -3337,9 +3337,9 @@ static void set_line_char(struct cyclades_port *info)
 
                /* CD sensitivity */
                if (cflag & CLOCAL)
-                       info->flags &= ~ASYNC_CHECK_CD;
+                       info->port.flags &= ~ASYNC_CHECK_CD;
                else
-                       info->flags |= ASYNC_CHECK_CD;
+                       info->port.flags |= ASYNC_CHECK_CD;
 
                if (baud == 0) {        /* baud rate is zero, turn off line */
                        cy_writel(&ch_ctrl->rs_control,
@@ -3361,8 +3361,8 @@ static void set_line_char(struct cyclades_port *info)
                                "was %x\n", info->line, retval);
                }
 
-               if (info->tty)
-                       clear_bit(TTY_IO_ERROR, &info->tty->flags);
+               if (info->port.tty)
+                       clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
        }
 }                              /* set_line_char */
 
@@ -3381,7 +3381,7 @@ get_serial_info(struct cyclades_port *info,
        tmp.port = (info->card - cy_card) * 0x100 + info->line -
                cinfo->first_line;
        tmp.irq = cinfo->irq;
-       tmp.flags = info->flags;
+       tmp.flags = info->port.flags;
        tmp.close_delay = info->close_delay;
        tmp.closing_wait = info->closing_wait;
        tmp.baud_base = info->baud;
@@ -3406,9 +3406,9 @@ set_serial_info(struct cyclades_port *info,
                                new_serial.baud_base != info->baud ||
                                (new_serial.flags & ASYNC_FLAGS &
                                        ~ASYNC_USR_MASK) !=
-                               (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))
+                               (info->port.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK))
                        return -EPERM;
-               info->flags = (info->flags & ~ASYNC_USR_MASK) |
+               info->port.flags = (info->port.flags & ~ASYNC_USR_MASK) |
                                (new_serial.flags & ASYNC_USR_MASK);
                info->baud = new_serial.baud_base;
                info->custom_divisor = new_serial.custom_divisor;
@@ -3422,13 +3422,13 @@ set_serial_info(struct cyclades_port *info,
 
        info->baud = new_serial.baud_base;
        info->custom_divisor = new_serial.custom_divisor;
-       info->flags = (info->flags & ~ASYNC_FLAGS) |
+       info->port.flags = (info->port.flags & ~ASYNC_FLAGS) |
                        (new_serial.flags & ASYNC_FLAGS);
        info->close_delay = new_serial.close_delay * HZ / 100;
        info->closing_wait = new_serial.closing_wait * HZ / 100;
 
 check_and_exit:
-       if (info->flags & ASYNC_INITIALIZED) {
+       if (info->port.flags & ASYNC_INITIALIZED) {
                set_line_char(info);
                return 0;
        } else {
@@ -4097,7 +4097,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
         */
        if (!(old_termios->c_cflag & CLOCAL) &&
            (tty->termios->c_cflag & CLOCAL))
-               wake_up_interruptible(&info->open_wait);
+               wake_up_interruptible(&info->port.open_wait);
 #endif
 }                              /* cy_set_termios */
 
@@ -4326,14 +4326,14 @@ static void cy_hangup(struct tty_struct *tty)
 
        cy_flush_buffer(tty);
        shutdown(info);
-       info->count = 0;
+       info->port.count = 0;
 #ifdef CY_DEBUG_COUNT
        printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n",
                current->pid);
 #endif
-       info->tty = NULL;
-       info->flags &= ~ASYNC_NORMAL_ACTIVE;
-       wake_up_interruptible(&info->open_wait);
+       info->port.tty = NULL;
+       info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+       wake_up_interruptible(&info->port.open_wait);
 }                              /* cy_hangup */
 
 /*
@@ -4379,12 +4379,11 @@ static int __devinit cy_init_card(struct cyclades_card *cinfo)
                info->magic = CYCLADES_MAGIC;
                info->card = cinfo;
                info->line = port;
-               info->flags = STD_COM_FLAGS;
                info->closing_wait = CLOSING_WAIT_DELAY;
                info->close_delay = 5 * HZ / 10;
 
-               init_waitqueue_head(&info->open_wait);
-               init_waitqueue_head(&info->close_wait);
+               tty_port_init(&info->port);
+               info->port.flags = STD_COM_FLAGS;
                init_completion(&info->shutdown_wait);
                init_waitqueue_head(&info->delta_msr_wait);
 
@@ -5237,7 +5236,7 @@ cyclades_get_proc_info(char *buf, char **start, off_t offset, int length,
                for (j = 0; j < cy_card[i].nports; j++) {
                        info = &cy_card[i].ports[j];
 
-                       if (info->count)
+                       if (info->port.count)
                                size = sprintf(buf + len, "%3d %8lu %10lu %8lu "
                                        "%10lu %8lu %9lu %6ld\n", info->line,
                                        (cur_jifs - info->idle_stats.in_use) /
@@ -5247,7 +5246,7 @@ cyclades_get_proc_info(char *buf, char **start, off_t offset, int length,
                                        (cur_jifs - info->idle_stats.recv_idle)/
                                        HZ, info->idle_stats.overruns,
                                        /* FIXME: double check locking */
-                                       (long)info->tty->ldisc.ops->num);
+                                       (long)info->port.tty->ldisc.ops->num);
                        else
                                size = sprintf(buf + len, "%3d %8lu %10lu %8lu "
                                        "%10lu %8lu %9lu %6ld\n",

diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index 504cb2c3fa9a68fb77a0a4b3afb94a933c095f9c..a982b74a6ee696f104c27ef234029bb7a47761a6 100644 (file)
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -550,11 +550,11 @@ struct cyclades_icount {
 
 struct cyclades_port {
        int                     magic;
+       struct tty_port         port;
        struct cyclades_card    *card;
        int                     line;
        int                     flags;          /* defined in tty.h */
        int                     type;           /* UART type */
-       struct tty_struct       *tty;
        int                     read_status_mask;
        int                     ignore_status_mask;
        int                     timeout;
@@ -569,11 +569,8 @@ struct cyclades_port {
        u8                      x_char; /* to be pushed out ASAP */
        int                     close_delay;
        unsigned short          closing_wait;
-       int                     count;  /* # of fd on device */
        int                     breakon;
        int                     breakoff;
-       int                     blocked_open; /* # of blocked opens */
-       unsigned char           *xmit_buf;
        int                     xmit_head;
        int                     xmit_tail;
        int                     xmit_cnt;
@@ -583,8 +580,6 @@ struct cyclades_port {
        struct cyclades_monitor mon;
        struct cyclades_idle_stats      idle_stats;
        struct cyclades_icount  icount;
-       wait_queue_head_t       open_wait;
-       wait_queue_head_t       close_wait;
        struct completion       shutdown_wait;
        wait_queue_head_t       delta_msr_wait;
        int throttle;