USB: New device PID for ftdi_sio driver

Hello,

I need to use MaxStream's PKG-U modules which includes a ftdi sio chipset for
usb2serial communication, here are the patches for handling Maxstream's modules.

The VID & PID to use with the open-source driver are provided on the CD-ROM
bundled with the modules.

From: Neil Superna ARMSTRONG <superna@na-prod.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 95a1805b064ff65cc0f7779f8643a5ece4593953..9200edc8f0fd072097fdc79647ca4ad225da012a 100644 (file)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -525,6 +525,7 @@ static struct usb_device_id id_table_combined [] = {
        { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
        { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
        { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
        { },                                    /* Optional parameter entry */
        { }                                     /* Terminating entry */
 };

diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 77ad0a09b3849dd675ea48c6dbf776a53094dbfe..c85c1fae0cb8351bb05b6e04603b0332144e6567 100644 (file)
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -518,6 +518,11 @@
 #define FTDI_IBS_PEDO_PID      0xff3e  /* IBS PEDO-Modem (RF modem 868.35 MHz) */
 #define FTDI_IBS_PROD_PID      0xff3f  /* future device */
 
+/*
+ *  MaxStream devices  www.maxstream.net
+ */
+#define FTDI_MAXSTREAM_PID     0xEE18  /* Xbee PKG-U Module */
+
 /* Commands */
 #define FTDI_SIO_RESET                 0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL    1 /* Set the modem control register */