--- /dev/null
+/*
+ * Marvell PATA driver.
+ *
+ * For the moment we drive the PATA port in legacy mode. That
+ * isn't making full use of the device functionality but it is
+ * easy to get working.
+ *
+ * (c) 2006 Red Hat <alan@redhat.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/ata.h>
+
+#define DRV_NAME "pata_marvell"
+#define DRV_VERSION "0.0.4t"
+
+/**
+ * marvell_pre_reset - check for 40/80 pin
+ * @ap: Port
+ *
+ * Perform the PATA port setup we need.
+ */
+
+static int marvell_pre_reset(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u32 devices;
+ unsigned long bar5;
+ void __iomem *barp;
+ int i;
+
+ /* Check if our port is enabled */
+
+ bar5 = pci_resource_start(pdev, 5);
+ barp = ioremap(bar5, 0x10);
+ if (barp == NULL)
+ return -ENOMEM;
+ printk("BAR5:");
+ for(i = 0; i <= 0x0F; i++)
+ printk("%02X:%02X ", i, readb(barp + i));
+ printk("\n");
+
+ devices = readl(barp + 0x0C);
+ iounmap(barp);
+
+ if (pdev->device == 0x6145 && ap->port_no == 0 && !(devices & 0x10)) /* PATA enable ? */
+ return -ENOENT;
+
+ /* Cable type */
+ switch(ap->port_no)
+ {
+ case 0:
+ /* Might be backward, docs unclear */
+ if(inb(ap->ioaddr.bmdma_addr + 1) & 1)
+ ap->cbl = ATA_CBL_PATA80;
+ else
+ ap->cbl = ATA_CBL_PATA40;
+
+ case 1: /* Legacy SATA port */
+ ap->cbl = ATA_CBL_SATA;
+ break;
+ }
+ return ata_std_prereset(ap);
+}
+
+/**
+ * marvell_error_handler - Setup and error handler
+ * @ap: Port to handle
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void marvell_error_handler(struct ata_port *ap)
+{
+ return ata_bmdma_drive_eh(ap, marvell_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/* No PIO or DMA methods needed for this device */
+
+static struct scsi_host_template marvell_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ /* Use standard CHS mapping rules */
+ .bios_param = ata_std_bios_param,
+};
+
+static const struct ata_port_operations marvell_ops = {
+ .port_disable = ata_port_disable,
+
+ /* Task file is PCI ATA format, use helpers */
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = marvell_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ /* BMDMA handling is PCI ATA format, use helpers */
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_pio_data_xfer,
+
+ /* Timeout handling */
+ .eng_timeout = ata_eng_timeout,
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ /* Generic PATA PCI ATA helpers */
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop,
+};
+
+
+/**
+ * marvell_init_one - Register Marvell ATA PCI device with kernel services
+ * @pdev: PCI device to register
+ * @ent: Entry in marvell_pci_tbl matching with @pdev
+ *
+ * Called from kernel PCI layer.
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, or -ERRNO value.
+ */
+
+static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ static struct ata_port_info info = {
+ .sht = &marvell_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x3f,
+
+ .port_ops = &marvell_ops,
+ };
+ static struct ata_port_info info_sata = {
+ .sht = &marvell_sht,
+ /* Slave possible as its magically mapped not real */
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = 0x7f,
+
+ .port_ops = &marvell_ops,
+ };
+ struct ata_port_info *port_info[2] = { &info, &info_sata };
+ int n_port = 2;
+
+ if (pdev->device == 0x6101)
+ n_port = 1;
+
+ return ata_pci_init_one(pdev, port_info, n_port);
+}
+
+static const struct pci_device_id marvell_pci_tbl[] = {
+ { PCI_DEVICE(0x11AB, 0x6101), },
+ { PCI_DEVICE(0x11AB, 0x6145), },
+ { } /* terminate list */
+};
+
+static struct pci_driver marvell_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = marvell_pci_tbl,
+ .probe = marvell_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+static int __init marvell_init(void)
+{
+ return pci_register_driver(&marvell_pci_driver);
+}
+
+static void __exit marvell_exit(void)
+{
+ pci_unregister_driver(&marvell_pci_driver);
+}
+
+module_init(marvell_init);
+module_exit(marvell_exit);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("SCSI low-level driver for Marvell ATA in legacy mode");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, marvell_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
projects / linux-2.6-omap-h63xx.git / commitdiff