]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
V4L/DVB (5727): Remove VIVI_SCATTER
authorMauro Carvalho Chehab <mchehab@infradead.org>
Tue, 29 May 2007 10:14:59 +0000 (07:14 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Wed, 18 Jul 2007 17:23:49 +0000 (14:23 -0300)
vivi scatter method were used as a proof of concept. It can be
safelly removed from mainstream, since the current method is
faster and better than the previous solution.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/video/vivi.c

index 3ef4d0159c3306fcbf7b0bf5b41803e1de7ebaa4..582c6ba7c608df511aa60e2afbdab1c36b1b6bf2 100644 (file)
@@ -145,9 +145,6 @@ struct vivi_buffer {
 
        struct vivi_fmt        *fmt;
 
-#ifdef CONFIG_VIVI_SCATTER
-       struct sg_to_addr      *to_addr;
-#endif
 };
 
 struct vivi_dmaqueue {
@@ -232,68 +229,13 @@ static u8 bars[8][3] = {
 #define TSTAMP_MAX_Y TSTAMP_MIN_Y+15
 #define TSTAMP_MIN_X 64
 
-#ifdef CONFIG_VIVI_SCATTER
-static void prep_to_addr(struct sg_to_addr to_addr[],
-                        struct videobuf_buffer *vb)
-{
-       int i, pos=0;
-
-       for (i=0;i<vb->dma.nr_pages;i++) {
-               to_addr[i].sg=&vb->dma.sglist[i];
-               to_addr[i].pos=pos;
-               pos += vb->dma.sglist[i].length;
-       }
-}
-
-static int get_addr_pos(int pos, int pages, struct sg_to_addr to_addr[])
-{
-       int p1=0,p2=pages-1,p3=pages/2;
-
-       /* Sanity test */
-       BUG_ON (pos>=to_addr[p2].pos+to_addr[p2].sg->length);
-
-       while (p1+1<p2) {
-               if (pos < to_addr[p3].pos) {
-                       p2=p3;
-               } else {
-                       p1=p3;
-               }
-               p3=(p1+p2)/2;
-       }
-       if (pos >= to_addr[p2].pos)
-               p1=p2;
-
-       return (p1);
-}
-#endif
 
-#ifdef CONFIG_VIVI_SCATTER
-static void gen_line(struct sg_to_addr to_addr[],int inipos,int pages,int wmax,
-                    int hmax, int line, char *timestr)
-#else
 static void gen_line(char *basep,int inipos,int wmax,
                     int hmax, int line, char *timestr)
-#endif
 {
        int  w,i,j,pos=inipos,y;
        char *p,*s;
        u8   chr,r,g,b,color;
-#ifdef CONFIG_VIVI_SCATTER
-       int pgpos,oldpg;
-       char *basep;
-       struct page *pg;
-
-       unsigned long flags;
-       spinlock_t spinlock;
-
-       spin_lock_init(&spinlock);
-
-       /* Get first addr pointed to pixel position */
-       oldpg=get_addr_pos(pos,pages,to_addr);
-       pg=pfn_to_page(sg_dma_address(to_addr[oldpg].sg) >> PAGE_SHIFT);
-       spin_lock_irqsave(&spinlock,flags);
-       basep = kmap_atomic(pg, KM_BOUNCE_READ)+to_addr[oldpg].sg->offset;
-#endif
 
        /* We will just duplicate the second pixel at the packet */
        wmax/=2;
@@ -305,18 +247,7 @@ static void gen_line(char *basep,int inipos,int wmax,
                b=bars[w*7/wmax][2];
 
                for (color=0;color<4;color++) {
-#ifdef CONFIG_VIVI_SCATTER
-                       pgpos=get_addr_pos(pos,pages,to_addr);
-                       if (pgpos!=oldpg) {
-                               pg=pfn_to_page(sg_dma_address(to_addr[pgpos].sg) >> PAGE_SHIFT);
-                               kunmap_atomic(basep, KM_BOUNCE_READ);
-                               basep= kmap_atomic(pg, KM_BOUNCE_READ)+to_addr[pgpos].sg->offset;
-                               oldpg=pgpos;
-                       }
-                       p=basep+pos-to_addr[pgpos].pos;
-#else
                        p=basep+pos;
-#endif
 
                        switch (color) {
                                case 0:
@@ -361,23 +292,7 @@ static void gen_line(char *basep,int inipos,int wmax,
 
                                pos=inipos+j*2;
                                for (color=0;color<4;color++) {
-#ifdef CONFIG_VIVI_SCATTER
-                                       pgpos=get_addr_pos(pos,pages,to_addr);
-                                       if (pgpos!=oldpg) {
-                                               pg=pfn_to_page(sg_dma_address(
-                                                               to_addr[pgpos].sg)
-                                                               >> PAGE_SHIFT);
-                                               kunmap_atomic(basep,
-                                                               KM_BOUNCE_READ);
-                                               basep= kmap_atomic(pg,
-                                                       KM_BOUNCE_READ)+
-                                                       to_addr[pgpos].sg->offset;
-                                               oldpg=pgpos;
-                                       }
-                                       p=basep+pos-to_addr[pgpos].pos;
-#else
                                        p=basep+pos;
-#endif
 
                                        y=TO_Y(r,g,b);
 
@@ -402,12 +317,7 @@ static void gen_line(char *basep,int inipos,int wmax,
 
 
 end:
-#ifdef CONFIG_VIVI_SCATTER
-       kunmap_atomic(basep, KM_BOUNCE_READ);
-       spin_unlock_irqrestore(&spinlock,flags);
-#else
        return;
-#endif
 }
 static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf)
 {
@@ -415,35 +325,16 @@ static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf)
        int hmax  = buf->vb.height;
        int wmax  = buf->vb.width;
        struct timeval ts;
-#ifdef CONFIG_VIVI_SCATTER
-       struct sg_to_addr *to_addr=buf->to_addr;
-       struct videobuf_buffer *vb=&buf->vb;
-#else
        char *tmpbuf;
-#endif
-
-#ifdef CONFIG_VIVI_SCATTER
-       /* Test if DMA mapping is ready */
-       if (!sg_dma_address(&vb->dma.sglist[0]))
-               return;
-
-       prep_to_addr(to_addr,vb);
 
-       /* Check if there is enough memory */
-       BUG_ON(buf->vb.dma.nr_pages << PAGE_SHIFT < (buf->vb.width*buf->vb.height)*2);
-#else
        if (buf->vb.dma.varea) {
                tmpbuf=kmalloc (wmax*2, GFP_KERNEL);
        } else {
                tmpbuf=buf->vb.dma.vmalloc;
        }
 
-#endif
 
        for (h=0;h<hmax;h++) {
-#ifdef CONFIG_VIVI_SCATTER
-               gen_line(to_addr,pos,vb->dma.nr_pages,wmax,hmax,h,dev->timestr);
-#else
                if (buf->vb.dma.varea) {
                        gen_line(tmpbuf,0,wmax,hmax,h,dev->timestr);
                        /* FIXME: replacing to __copy_to_user */
@@ -452,7 +343,6 @@ static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf)
                } else {
                        gen_line(tmpbuf,pos,wmax,hmax,h,dev->timestr);
                }
-#endif
                pos += wmax*2;
        }
 
@@ -718,11 +608,6 @@ static void free_buffer(struct videobuf_queue *vq, struct vivi_buffer *buf)
        if (in_interrupt())
                BUG();
 
-#ifdef CONFIG_VIVI_SCATTER
-       /*FIXME: Maybe a spinlock is required here */
-       kfree(buf->to_addr);
-       buf->to_addr=NULL;
-#endif
 
        videobuf_waiton(&buf->vb,0,0);
        videobuf_dma_unmap(vq, &buf->vb.dma);
@@ -768,12 +653,6 @@ buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
 
        buf->vb.state = STATE_PREPARED;
 
-#ifdef CONFIG_VIVI_SCATTER
-       if (NULL == (buf->to_addr = kmalloc(sizeof(*buf->to_addr) * vb->dma.nr_pages,GFP_KERNEL))) {
-               rc=-ENOMEM;
-               goto fail;
-       }
-#endif
        return 0;
 
 fail:
@@ -838,40 +717,6 @@ static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb
        free_buffer(vq,buf);
 }
 
-#ifdef CONFIG_VIVI_SCATTER
-static int vivi_map_sg(void *dev, struct scatterlist *sg, int nents,
-                      int direction)
-{
-       int i;
-
-       dprintk(1,"%s, number of pages=%d\n",__FUNCTION__,nents);
-       BUG_ON(direction == DMA_NONE);
-
-       for (i = 0; i < nents; i++ ) {
-               BUG_ON(!sg[i].page);
-
-               sg_dma_address(&sg[i]) = page_to_phys(sg[i].page) + sg[i].offset;
-       }
-
-       return nents;
-}
-
-static int vivi_unmap_sg(void *dev,struct scatterlist *sglist,int nr_pages,
-                        int direction)
-{
-       dprintk(1,"%s\n",__FUNCTION__);
-       return 0;
-}
-
-static int vivi_dma_sync_sg(void *dev,struct scatterlist *sglist, int nr_pages,
-                           int direction)
-{
-//     dprintk(1,"%s\n",__FUNCTION__);
-
-//     flush_write_buffers();
-       return 0;
-}
-#endif
 
 static struct videobuf_queue_ops vivi_video_qops = {
        .buf_setup      = buffer_setup,
@@ -1260,19 +1105,11 @@ static int vivi_open(struct inode *inode, struct file *file)
        sprintf(dev->timestr,"%02d:%02d:%02d:%03d",
                        dev->h,dev->m,dev->s,(dev->us+500)/1000);
 
-#ifdef CONFIG_VIVI_SCATTER
-       videobuf_queue_init(&fh->vb_vidq,VIDEOBUF_DMA_SCATTER, &vivi_video_qops,
-                       NULL, NULL,
-                       fh->type,
-                       V4L2_FIELD_INTERLACED,
-                       sizeof(struct vivi_buffer),fh);
-#else
        videobuf_queue_init(&fh->vb_vidq, &vivi_video_qops,
                        NULL, NULL,
                        fh->type,
                        V4L2_FIELD_INTERLACED,
                        sizeof(struct vivi_buffer),fh);
-#endif
 
        return 0;
 }