]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
bnx2: Add bnx2_shutdown_chip().
authorMichael Chan <mchan@broadcom.com>
Thu, 9 Oct 2008 19:21:08 +0000 (12:21 -0700)
committerDavid S. Miller <davem@davemloft.net>
Thu, 9 Oct 2008 19:21:08 +0000 (12:21 -0700)
This logic is used in bnx2_close() and bnx2_suspend() and
so should be separated out into a separate function.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/bnx2.c

index 883e0a724107c10c29f0eb13421f9db4a2d38963..b35f440361debd12127cceb9148898ef29404ea6 100644 (file)
@@ -5072,6 +5072,21 @@ bnx2_init_nic(struct bnx2 *bp, int reset_phy)
        return 0;
 }
 
+static int
+bnx2_shutdown_chip(struct bnx2 *bp)
+{
+       u32 reset_code;
+
+       if (bp->flags & BNX2_FLAG_NO_WOL)
+               reset_code = BNX2_DRV_MSG_CODE_UNLOAD_LNK_DN;
+       else if (bp->wol)
+               reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL;
+       else
+               reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
+
+       return bnx2_reset_chip(bp, reset_code);
+}
+
 static int
 bnx2_test_registers(struct bnx2 *bp)
 {
@@ -6095,20 +6110,13 @@ static int
 bnx2_close(struct net_device *dev)
 {
        struct bnx2 *bp = netdev_priv(dev);
-       u32 reset_code;
 
        cancel_work_sync(&bp->reset_task);
 
        bnx2_disable_int_sync(bp);
        bnx2_napi_disable(bp);
        del_timer_sync(&bp->timer);
-       if (bp->flags & BNX2_FLAG_NO_WOL)
-               reset_code = BNX2_DRV_MSG_CODE_UNLOAD_LNK_DN;
-       else if (bp->wol)
-               reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL;
-       else
-               reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
-       bnx2_reset_chip(bp, reset_code);
+       bnx2_shutdown_chip(bp);
        bnx2_free_irq(bp);
        bnx2_free_skbs(bp);
        bnx2_free_mem(bp);
@@ -7777,7 +7785,6 @@ bnx2_suspend(struct pci_dev *pdev, pm_message_t state)
 {
        struct net_device *dev = pci_get_drvdata(pdev);
        struct bnx2 *bp = netdev_priv(dev);
-       u32 reset_code;
 
        /* PCI register 4 needs to be saved whether netif_running() or not.
         * MSI address and data need to be saved if using MSI and
@@ -7791,13 +7798,7 @@ bnx2_suspend(struct pci_dev *pdev, pm_message_t state)
        bnx2_netif_stop(bp);
        netif_device_detach(dev);
        del_timer_sync(&bp->timer);
-       if (bp->flags & BNX2_FLAG_NO_WOL)
-               reset_code = BNX2_DRV_MSG_CODE_UNLOAD_LNK_DN;
-       else if (bp->wol)
-               reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL;
-       else
-               reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL;
-       bnx2_reset_chip(bp, reset_code);
+       bnx2_shutdown_chip(bp);
        bnx2_free_skbs(bp);
        bnx2_set_power_state(bp, pci_choose_state(pdev, state));
        return 0;