struct ieee80211_supported_band *sband;
struct ieee80211_sub_if_data *sdata = sta->sdata;
+ /*
+ * FIXME: updating the flags is racy when this function is
+ * called from ieee80211_change_station(), this will
+ * be resolved in a future patch.
+ */
+
if (params->station_flags & STATION_FLAG_CHANGED) {
sta->flags &= ~WLAN_STA_AUTHORIZED;
if (params->station_flags & STATION_FLAG_AUTHORIZED)
sta->flags |= WLAN_STA_WME;
}
+ /*
+ * FIXME: updating the following information is racy when this
+ * function is called from ieee80211_change_station().
+ * However, all this information should be static so
+ * maybe we should just reject attemps to change it.
+ */
+
if (params->aid) {
sta->aid = params->aid;
if (sta->aid > IEEE80211_MAX_AID)
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct sta_info *sta;
struct ieee80211_sub_if_data *sdata;
+ int err;
/* Prevent a race with changing the rate control algorithm */
if (!netif_running(dev))
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (ieee80211_vif_is_mesh(&sdata->vif))
- sta = mesh_plink_add(mac, DEFAULT_RATES, sdata);
+ sta = mesh_plink_alloc(sdata, mac, DEFAULT_RATES, GFP_KERNEL);
else
- sta = sta_info_add(sdata, mac);
-
- if (IS_ERR(sta))
- return PTR_ERR(sta);
-
- if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN ||
- sdata->vif.type == IEEE80211_IF_TYPE_AP)
- ieee80211_send_layer2_update(sta);
+ sta = sta_info_alloc(sdata, mac, GFP_KERNEL);
+ if (!sta)
+ return -ENOMEM;
sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC;
rate_control_rate_init(sta, local);
+ rcu_read_lock();
+
+ err = sta_info_insert(sta);
+ if (err) {
+ sta_info_destroy(sta);
+ rcu_read_unlock();
+ return err;
+ }
+
+ if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN ||
+ sdata->vif.type == IEEE80211_IF_TYPE_AP)
+ ieee80211_send_layer2_update(sta);
+
+ rcu_read_unlock();
+
return 0;
}
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sta_info *sta;
+ int err;
DECLARE_MAC_BUF(mac);
might_sleep();
if (compare_ether_addr(remote_addr, sdata->u.wds.remote_addr) == 0)
return 0;
- rcu_read_lock();
-
/* Create STA entry for the new peer */
- sta = sta_info_add(sdata, remote_addr);
- if (IS_ERR(sta)) {
- rcu_read_unlock();
- return PTR_ERR(sta);
- }
+ sta = sta_info_alloc(sdata, remote_addr, GFP_KERNEL);
+ if (!sta)
+ return -ENOMEM;
sta->flags |= WLAN_STA_AUTHORIZED;
+ err = sta_info_insert(sta);
+ if (err) {
+ sta_info_destroy(sta);
+ return err;
+ }
+
+ rcu_read_lock();
/* Remove STA entry for the old peer */
sta = sta_info_get(local, sdata->u.wds.remote_addr);
{
/* not an elegant detour, but there is no choice as the timer passes
* only one argument, and both sta_info and TID are needed, so init
- * flow in sta_info_add gives the TID as data, while the timer_to_id
+ * flow in sta_info_create gives the TID as data, while the timer_to_id
* array gives the sta through container_of */
u16 tid = *(int *)data;
struct sta_info *temp_sta = container_of((void *)data,
{
/* not an elegant detour, but there is no choice as the timer passes
* only one argument, and verious sta_info are needed here, so init
- * flow in sta_info_add gives the TID as data, while the timer_to_id
+ * flow in sta_info_create gives the TID as data, while the timer_to_id
* array gives the sta through container_of */
u8 *ptid = (u8 *)data;
u8 *timer_to_id = ptid - *ptid;
sta = sta_info_get(local, ifsta->bssid);
if (!sta) {
struct ieee80211_sta_bss *bss;
+ int err;
- sta = sta_info_add(sdata, ifsta->bssid);
- if (IS_ERR(sta)) {
- printk(KERN_DEBUG "%s: failed to add STA entry for the"
- " AP (error %ld)\n", dev->name, PTR_ERR(sta));
+ sta = sta_info_alloc(sdata, ifsta->bssid, GFP_ATOMIC);
+ if (!sta) {
+ printk(KERN_DEBUG "%s: failed to alloc STA entry for"
+ " the AP\n", dev->name);
rcu_read_unlock();
return;
}
sta->last_noise = bss->noise;
ieee80211_rx_bss_put(dev, bss);
}
+
+ err = sta_info_insert(sta);
+ if (err) {
+ printk(KERN_DEBUG "%s: failed to insert STA entry for"
+ " the AP (error %d)\n", dev->name, err);
+ sta_info_destroy(sta);
+ rcu_read_unlock();
+ return;
+ }
}
+ /*
+ * FIXME: Do we really need to update the sta_info's information here?
+ * We already know about the AP (we found it in our list) so it
+ * should already be filled with the right info, no?
+ * As is stands, all this is racy because typically we assume
+ * the information that is filled in here (except flags) doesn't
+ * change while a STA structure is alive. As such, it should move
+ * to between the sta_info_alloc() and sta_info_insert() above.
+ */
+
sta->flags |= WLAN_STA_AUTH | WLAN_STA_ASSOC | WLAN_STA_ASSOC_AP |
WLAN_STA_AUTHORIZED;
"local TSF - IBSS merge with BSSID %s\n",
dev->name, print_mac(mac, mgmt->bssid));
ieee80211_sta_join_ibss(dev, &sdata->u.sta, bss);
- rcu_read_lock();
ieee80211_ibss_add_sta(dev, NULL,
mgmt->bssid, mgmt->sa);
- rcu_read_unlock();
}
}
}
-/* must be called under RCU read lock */
struct sta_info * ieee80211_ibss_add_sta(struct net_device *dev,
struct sk_buff *skb, u8 *bssid,
u8 *addr)
printk(KERN_DEBUG "%s: Adding new IBSS station %s (dev=%s)\n",
wiphy_name(local->hw.wiphy), print_mac(mac, addr), dev->name);
- sta = sta_info_add(sdata, addr);
- if (IS_ERR(sta))
+ sta = sta_info_alloc(sdata, addr, GFP_ATOMIC);
+ if (!sta)
return NULL;
sta->flags |= WLAN_STA_AUTHORIZED;
rate_control_rate_init(sta, local);
+ if (sta_info_insert(sta)) {
+ sta_info_destroy(sta);
+ return NULL;
+ }
+
return sta;
}
bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie,
struct net_device *dev);
void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata);
-struct sta_info *mesh_plink_add(u8 *hw_addr, u64 rates,
- struct ieee80211_sub_if_data *sdata);
+struct sta_info *mesh_plink_alloc(struct ieee80211_sub_if_data *sdata,
+ u8 *hw_addr, u64 rates, gfp_t gfp);
void mesh_plink_broken(struct sta_info *sta);
void mesh_plink_deactivate(struct sta_info *sta);
int mesh_plink_open(struct sta_info *sta);
}
/**
- * mesh_plink_add - allocate and add a new mesh peer link
+ * mesh_plink_alloc - allocate a new mesh peer link
*
+ * @sdata: local mesh interface
* @hw_addr: hardware address (ETH_ALEN length)
* @rates: rates the mesh peer supports
- * @dev: local mesh interface
*
* The initial state of the new plink is set to LISTEN
*
- * Returns: non-NULL on success, ERR_PTR() on error.
+ * Returns: NULL on error.
*/
-struct sta_info *mesh_plink_add(u8 *hw_addr, u64 rates,
- struct ieee80211_sub_if_data *sdata)
+struct sta_info *mesh_plink_alloc(struct ieee80211_sub_if_data *sdata,
+ u8 *hw_addr, u64 rates, gfp_t gfp)
{
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
if (compare_ether_addr(hw_addr, sdata->dev->dev_addr) == 0)
/* never add ourselves as neighbours */
- return ERR_PTR(-EINVAL);
+ return NULL;
if (is_multicast_ether_addr(hw_addr))
- return ERR_PTR(-EINVAL);
+ return NULL;
if (local->num_sta >= MESH_MAX_PLINKS)
- return ERR_PTR(-ENOSPC);
+ return NULL;
- sta = sta_info_add(sdata, hw_addr);
- if (IS_ERR(sta))
- return sta;
+ sta = sta_info_alloc(sdata, hw_addr, gfp);
+ if (!sta)
+ return NULL;
sta->plink_state = LISTEN;
spin_lock_init(&sta->plink_lock);
init_timer(&sta->plink_timer);
sta->flags |= WLAN_STA_AUTHORIZED;
sta->supp_rates[local->hw.conf.channel->band] = rates;
- rate_control_rate_init(sta, local);
-
- mesh_accept_plinks_update(sdata);
return sta;
}
sta = sta_info_get(local, hw_addr);
if (!sta) {
- sta = mesh_plink_add(hw_addr, rates, sdata);
- if (IS_ERR(sta)) {
+ sta = mesh_plink_alloc(sdata, hw_addr, rates, GFP_ATOMIC);
+ if (!sta) {
+ rcu_read_unlock();
+ return;
+ }
+ if (sta_info_insert(sta)) {
+ sta_info_destroy(sta);
rcu_read_unlock();
return;
}
}
rates = ieee80211_sta_get_rates(local, &elems, rx_status->band);
- sta = mesh_plink_add(mgmt->sa, rates, sdata);
- if (IS_ERR(sta)) {
+ sta = mesh_plink_alloc(sdata, mgmt->sa, rates, GFP_ATOMIC);
+ if (!sta) {
mpl_dbg("Mesh plink error: plink table full\n");
rcu_read_unlock();
return;
}
+ if (sta_info_insert(sta)) {
+ sta_info_destroy(sta);
+ rcu_read_unlock();
+ return;
+ }
event = OPN_ACPT;
spin_lock_bh(&sta->plink_lock);
} else {
* for faster lookup and a list for iteration. They are managed using
* RCU, i.e. access to the list and hash table is protected by RCU.
*
- * STA info structures are always "alive" when they are added with
- * @sta_info_add() [this may be changed in the future to allow allocating
- * outside of a critical section!], they are then added to the hash
- * table and list. Therefore, @sta_info_add() must also be RCU protected,
- * also, the caller of @sta_info_add() cannot assume that it owns the
- * structure.
+ * Upon allocating a STA info structure with @sta_info_alloc() or
+ * mesh_plink_alloc(), the caller owns that structure. It must then either
+ * destroy it using @sta_info_destroy() (which is pretty useless) or insert
+ * it into the hash table using @sta_info_insert() which demotes the reference
+ * from ownership to a regular RCU-protected reference; if the function
+ * is called without protection by an RCU critical section the reference
+ * is instantly invalidated.
*
* Because there are debugfs entries for each station, and adding those
* must be able to sleep, it is also possible to "pin" a station entry,
struct ieee80211_local *local = sta->local;
struct sk_buff *skb;
int i;
+ DECLARE_MAC_BUF(mbuf);
+
+ if (!sta)
+ return;
ASSERT_RTNL();
might_sleep();
rate_control_free_sta(sta->rate_ctrl, sta->rate_ctrl_priv);
rate_control_put(sta->rate_ctrl);
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ printk(KERN_DEBUG "%s: Destroyed STA %s\n",
+ wiphy_name(local->hw.wiphy), print_mac(mbuf, sta->addr));
+#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+
kfree(sta);
}
rcu_assign_pointer(local->sta_hash[STA_HASH(sta->addr)], sta);
}
-struct sta_info *sta_info_add(struct ieee80211_sub_if_data *sdata,
- u8 *addr)
+struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
+ u8 *addr, gfp_t gfp)
{
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
int i;
- DECLARE_MAC_BUF(mac);
- unsigned long flags;
+ DECLARE_MAC_BUF(mbuf);
- sta = kzalloc(sizeof(*sta), GFP_ATOMIC);
+ sta = kzalloc(sizeof(*sta), gfp);
if (!sta)
- return ERR_PTR(-ENOMEM);
+ return NULL;
memcpy(sta->addr, addr, ETH_ALEN);
sta->local = local;
sta->rate_ctrl = rate_control_get(local->rate_ctrl);
sta->rate_ctrl_priv = rate_control_alloc_sta(sta->rate_ctrl,
- GFP_ATOMIC);
+ gfp);
if (!sta->rate_ctrl_priv) {
rate_control_put(sta->rate_ctrl);
kfree(sta);
- return ERR_PTR(-ENOMEM);
+ return NULL;
}
spin_lock_init(&sta->ampdu_mlme.ampdu_rx);
}
skb_queue_head_init(&sta->ps_tx_buf);
skb_queue_head_init(&sta->tx_filtered);
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ printk(KERN_DEBUG "%s: Allocated STA %s\n",
+ wiphy_name(local->hw.wiphy), print_mac(mbuf, sta->addr));
+#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+
+ return sta;
+}
+
+int sta_info_insert(struct sta_info *sta)
+{
+ struct ieee80211_local *local = sta->local;
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ unsigned long flags;
+ DECLARE_MAC_BUF(mac);
+
spin_lock_irqsave(&local->sta_lock, flags);
/* check if STA exists already */
- if (__sta_info_find(local, addr)) {
+ if (__sta_info_find(local, sta->addr)) {
spin_unlock_irqrestore(&local->sta_lock, flags);
- return ERR_PTR(-EEXIST);
+ return -EEXIST;
}
list_add(&sta->list, &local->sta_list);
local->num_sta++;
sdata = sdata->u.vlan.ap;
local->ops->sta_notify(local_to_hw(local), &sdata->vif,
- STA_NOTIFY_ADD, addr);
+ STA_NOTIFY_ADD, sta->addr);
}
- spin_unlock_irqrestore(&local->sta_lock, flags);
-
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- printk(KERN_DEBUG "%s: Added STA %s\n",
- wiphy_name(local->hw.wiphy), print_mac(mac, addr));
+ printk(KERN_DEBUG "%s: Inserted STA %s\n",
+ wiphy_name(local->hw.wiphy), print_mac(mac, sta->addr));
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+ spin_unlock_irqrestore(&local->sta_lock, flags);
+
#ifdef CONFIG_MAC80211_DEBUGFS
/* debugfs entry adding might sleep, so schedule process
* context task for adding entry for STAs that do not yet
queue_work(local->hw.workqueue, &local->sta_debugfs_add);
#endif
- return sta;
+ if (ieee80211_vif_is_mesh(&sdata->vif))
+ mesh_accept_plinks_update(sdata);
+
+ return 0;
}
static inline void __bss_tim_set(struct ieee80211_if_ap *bss, u16 aid)
struct sta_info *sta_info_get_by_idx(struct ieee80211_local *local, int idx,
struct net_device *dev);
/*
- * Add a new STA info, must be under RCU read lock
- * because otherwise the returned reference isn't
- * necessarily valid long enough.
+ * Create a new STA info, caller owns returned structure
+ * until sta_info_insert().
*/
-struct sta_info *sta_info_add(struct ieee80211_sub_if_data *sdata,
- u8 *addr);
+struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
+ u8 *addr, gfp_t gfp);
+/*
+ * Insert STA info into hash table/list, returns zero or a
+ * -EEXIST if (if the same MAC address is already present).
+ *
+ * Calling this without RCU protection makes the caller
+ * relinquish its reference to @sta.
+ */
+int sta_info_insert(struct sta_info *sta);
/*
* Unlink a STA info from the hash table/list.
* This can NULL the STA pointer if somebody else
projects / linux-2.6-omap-h63xx.git / commitdiff