dz: update kconfig description

Reformat the Kconfig entries and update descriptions for accuracy.  Select the
driver by default for configurations of interest.  For the curious: 32BIT
means only 32-bit DECstations support the device, not that the driver is not
64-bit clean; I have not checked that either though.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 6a44fb1dc167c0c74a39ac161f287e68c64e212f..50d6e2214ddfe7e4080affde7b1b7d1419fcc464 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -465,20 +465,24 @@ config SERIAL_DZ
        bool "DECstation DZ serial driver"
        depends on MACH_DECSTATION && 32BIT
        select SERIAL_CORE
-       help
-         DZ11-family serial controllers for VAXstations, including the
-         DC7085, M7814, and M7819.
+       default y
+       ---help---
+         DZ11-family serial controllers for DECstations and VAXstations,
+         including the DC7085, M7814, and M7819.
 
 config SERIAL_DZ_CONSOLE
        bool "Support console on DECstation DZ serial driver"
        depends on SERIAL_DZ=y
        select SERIAL_CORE_CONSOLE
-       help
+       default y
+       ---help---
          If you say Y here, it will be possible to use a serial port as the
          system console (the system console is the device which receives all
          kernel messages and warnings and which allows logins in single user
-         mode).  Note that the firmware uses ttyS0 as the serial console on
-         the Maxine and ttyS2 on the others.
+         mode).
+
+         Note that the firmware uses ttyS3 as the serial console on
+         DECstations that use this driver.
 
          If unsure, say Y.