]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
V4L/DVB (5240): Qt1010: use i2c_gate_ctrl where appropriate
authorAntti Palosaari <crope@iki.fi>
Sat, 27 Jan 2007 19:41:35 +0000 (16:41 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Wed, 21 Feb 2007 15:35:31 +0000 (13:35 -0200)
This patch adds calls to i2c_gate_ctrl in the qt1010 dvb tuner module,
while removing the temporary hack in au6610 and gl861.
Tested successfully against fi-Oulu frequencies with
MSI Megasky 580 GL861 and Sigmatek DVB-110 AU6610.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/dvb/dvb-usb/au6610.c
drivers/media/dvb/dvb-usb/gl861.c
drivers/media/dvb/frontends/qt1010.c

index 456b89f4f761573c2d2e33a7c1787b875a1739f2..0dc66a8d2baff633d6a0c409b5066c82778c7fd9 100644 (file)
@@ -145,19 +145,6 @@ static struct qt1010_config au6610_qt1010_config = {
 
 static int au6610_qt1010_tuner_attach(struct dvb_usb_adapter *adap)
 {
-       /* TODO FIXME; probably I2C gate.
-       QT1010 tuner does not respond before we write 0x1a to ZL10353 demod
-       register 0x62. This ought to be done somewhere in demod initialization.
-       This solution is temporary hack. */
-
-       u8 buf[2] = { 0x62, 0x1a };
-       struct i2c_msg msg = { .addr = au6610_zl10353_config.demod_address,
-                              .flags = 0, .buf = buf, .len = 2 };
-
-       if (i2c_transfer(&adap->dev->i2c_adap, &msg, 1) != 1) {
-               printk(KERN_WARNING "au6610 tuner attach failed\n");
-               return -EREMOTEIO;
-       }
        return dvb_attach(qt1010_attach,
                          adap->fe, &adap->dev->i2c_adap,
                          &au6610_qt1010_config) == NULL ? -ENODEV : 0;
index d62edb533d0093fee30187fb7ada9ceaada33df5..c9f38a5e70d35761405b9e039ae27eaf87e9fc10 100644 (file)
@@ -122,19 +122,6 @@ static struct qt1010_config gl861_qt1010_config = {
 
 static int gl861_tuner_attach(struct dvb_usb_adapter *adap)
 {
-       /* TODO FIXME; probably I2C gate.
-       QT1010 tuner does not respond before we write 0x1a to ZL10353 demod
-       register 0x62. This ought to be done somewhere in demod initialization.
-       This solution is temporary hack. */
-
-       u8 buf[2] = { 0x62, 0x1a };
-       struct i2c_msg msg = { .addr = gl861_zl10353_config.demod_address,
-                              .flags = 0, .buf = buf, .len = 2 };
-
-       if (i2c_transfer(&adap->dev->i2c_adap, &msg, 1) != 1) {
-               printk(KERN_WARNING "gl861 tuner attach failed\n");
-               return -EREMOTEIO;
-       }
        return dvb_attach(qt1010_attach,
                          adap->fe, &adap->dev->i2c_adap,
                          &gl861_qt1010_config) == NULL ? -ENODEV : 0;
index d7360f45355a7f00a1c75d0292357c593a99e0d4..c3408dcabe87f1318de4b48cbd6967e50319225c 100644 (file)
@@ -149,6 +149,9 @@ static int qt1010_set_params(struct dvb_frontend *fe, struct dvb_frontend_parame
        priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? params->u.ofdm.bandwidth : 0;
        priv->frequency = freq;
 
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
        /* reg 05 base value */
        if      (freq < 290000000) reg05 = 0x14; /* 290 MHz */
        else if (freq < 610000000) reg05 = 0x34; /* 610 MHz */
@@ -242,6 +245,9 @@ static int qt1010_set_params(struct dvb_frontend *fe, struct dvb_frontend_parame
        if (debug)
                qt1010_dump_regs(priv);
 
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
        return 0;
 }
 
@@ -277,7 +283,6 @@ static int qt1010_init_meas1(struct qt1010_priv *priv, u8 oper, u8 reg, u8 reg_i
        return qt1010_writereg(priv, 0x1e, 0x00);
 }
 
-
 static u8 qt1010_init_meas2(struct qt1010_priv *priv, u8 reg_init_val, u8 *retval)
 {
        u8 i, val;
@@ -347,6 +352,9 @@ static int qt1010_init(struct dvb_frontend *fe)
                { QT1010_WR, 0x08, 0x08 }
        };
 
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
        for (i = 0; i < sizeof(i2c_data) / sizeof(*i2c_data); i++) {
                switch (i2c_data[i].oper) {
                case QT1010_WR:
@@ -430,6 +438,9 @@ struct dvb_frontend * qt1010_attach(struct dvb_frontend *fe,
        priv->cfg      = cfg;
        priv->i2c      = i2c;
 
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
 
        /* Try to detect tuner chip. Probably this is not correct register. */
        if (qt1010_readreg(priv, 0x29, &id) != 0 || (id != 0x39)) {
@@ -437,6 +448,9 @@ struct dvb_frontend * qt1010_attach(struct dvb_frontend *fe,
                return NULL;
        }
 
+       if (fe->ops.i2c_gate_ctrl)
+               fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
        printk(KERN_INFO "Quantek QT1010 successfully identified.\n");
        memcpy(&fe->ops.tuner_ops, &qt1010_tuner_ops, sizeof(struct dvb_tuner_ops));