]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
net: Get rid of by-hand TX queue hashing.
authorDavid S. Miller <davem@davemloft.net>
Wed, 28 Jan 2009 00:34:47 +0000 (16:34 -0800)
committerDavid S. Miller <davem@davemloft.net>
Wed, 28 Jan 2009 00:34:47 +0000 (16:34 -0800)
We now only TX hash on pre-computed SKB properties.

The thinking is:

1) High performance routing and firewalling setups will
   have a multiqueue capable card used for receive, and
   therefore would have RX queue recordings made into
   the SKB which can be used for the TX side hash.

2) Locally generated packets will have an attached socket
   and thus a valid sk->sk_hash to make use of.

Signed-off-by: David S. Miller <davem@davemloft.net>
net/core/dev.c

index cb8caa93cacaba5079a441022a61b865c488590a..e61b95c11fc0bdb31db2f3e4f64e08df1ff79601 100644 (file)
@@ -1708,72 +1708,27 @@ out_kfree_skb:
        return 0;
 }
 
-static u32 simple_tx_hashrnd;
-static int simple_tx_hashrnd_initialized = 0;
+static u32 skb_tx_hashrnd;
+static int skb_tx_hashrnd_initialized = 0;
 
-static u16 simple_tx_hash(struct net_device *dev, struct sk_buff *skb)
+static u16 skb_tx_hash(struct net_device *dev, struct sk_buff *skb)
 {
-       u32 addr1, addr2, ports;
-       u32 hash, ihl;
-       u8 ip_proto = 0;
+       u32 hash;
 
-       if (unlikely(!simple_tx_hashrnd_initialized)) {
-               get_random_bytes(&simple_tx_hashrnd, 4);
-               simple_tx_hashrnd_initialized = 1;
+       if (unlikely(!skb_tx_hashrnd_initialized)) {
+               get_random_bytes(&skb_tx_hashrnd, 4);
+               skb_tx_hashrnd_initialized = 1;
        }
 
        if (skb_rx_queue_recorded(skb)) {
-               u32 val = skb_get_rx_queue(skb);
-
-               hash = jhash_1word(val, simple_tx_hashrnd);
-               goto out;
-       }
-
-       if (skb->sk && skb->sk->sk_hash) {
-               u32 val = skb->sk->sk_hash;
-
-               hash = jhash_1word(val, simple_tx_hashrnd);
-               goto out;
-       }
-
-       switch (skb->protocol) {
-       case htons(ETH_P_IP):
-               if (!(ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET)))
-                       ip_proto = ip_hdr(skb)->protocol;
-               addr1 = ip_hdr(skb)->saddr;
-               addr2 = ip_hdr(skb)->daddr;
-               ihl = ip_hdr(skb)->ihl;
-               break;
-       case htons(ETH_P_IPV6):
-               ip_proto = ipv6_hdr(skb)->nexthdr;
-               addr1 = ipv6_hdr(skb)->saddr.s6_addr32[3];
-               addr2 = ipv6_hdr(skb)->daddr.s6_addr32[3];
-               ihl = (40 >> 2);
-               break;
-       default:
-               return 0;
-       }
-
-
-       switch (ip_proto) {
-       case IPPROTO_TCP:
-       case IPPROTO_UDP:
-       case IPPROTO_DCCP:
-       case IPPROTO_ESP:
-       case IPPROTO_AH:
-       case IPPROTO_SCTP:
-       case IPPROTO_UDPLITE:
-               ports = *((u32 *) (skb_network_header(skb) + (ihl * 4)));
-               break;
-
-       default:
-               ports = 0;
-               break;
-       }
+               hash = skb_get_rx_queue(skb);
+       } else if (skb->sk && skb->sk->sk_hash) {
+               hash = skb->sk->sk_hash;
+       } else
+               hash = skb->protocol;
 
-       hash = jhash_3words(addr1, addr2, ports, simple_tx_hashrnd);
+       hash = jhash_1word(hash, skb_tx_hashrnd);
 
-out:
        return (u16) (((u64) hash * dev->real_num_tx_queues) >> 32);
 }
 
@@ -1786,7 +1741,7 @@ static struct netdev_queue *dev_pick_tx(struct net_device *dev,
        if (ops->ndo_select_queue)
                queue_index = ops->ndo_select_queue(dev, skb);
        else if (dev->real_num_tx_queues > 1)
-               queue_index = simple_tx_hash(dev, skb);
+               queue_index = skb_tx_hash(dev, skb);
 
        skb_set_queue_mapping(skb, queue_index);
        return netdev_get_tx_queue(dev, queue_index);