]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
tty: Use the generic RS485 ioctl on CRIS
authorClaudio Scordino <claudio@evidence.eu.com>
Tue, 7 Apr 2009 15:48:19 +0000 (16:48 +0100)
committerLinus Torvalds <torvalds@linux-foundation.org>
Tue, 7 Apr 2009 15:44:05 +0000 (08:44 -0700)
Use the new general RS485 Linux data structure (introduced by Alan with
commit number c26c56c0f40e200e61d1390629c806f6adaffbcc) in the Cris
architecture too (currently, Cris still uses the old private data
structure instead of the new one).

Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Tested-by: Hinko Kocevar <hinko.kocevar@cetrtapot.si>
Tested-by: Janez Cufer <janez.cufer@cetrtapot.si>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/cris/include/asm/ioctls.h
arch/cris/include/asm/rs485.h
arch/cris/include/asm/termios.h
drivers/serial/crisv10.c
drivers/serial/crisv10.h

index 4f4e52531fa0bc7a07433caace232cdd4f053145..35bbc181598a710477c1e81fc099d3662ca13d99 100644 (file)
@@ -74,8 +74,9 @@
 #define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
 #define FIOQSIZE       0x5460
 
-#define TIOCSERSETRS485 0x5461  /* enable rs-485 */
-#define TIOCSERWRRS485  0x5462  /* write rs-485 */
+#define TIOCSERSETRS485        0x5461  /* enable rs-485 (deprecated) */
+#define TIOCSERWRRS485 0x5462  /* write rs-485 */
+#define TIOCSRS485     0x5463  /* enable rs-485 */
 
 /* Used for packet mode */
 #define TIOCPKT_DATA            0
index c331c51b0c2b4cec0ac59df248220b32e351c7ce..ad40f9fbcb8ae7459a43985bc3b9748f30c19022 100644 (file)
@@ -1,15 +1,13 @@
 /* RS-485 structures */
 
-/* RS-485 support */
-/* Used with ioctl() TIOCSERSETRS485 */
+/* Used with ioctl() TIOCSERSETRS485 for backward compatibility!
+ * XXX: Do not use it for new code!
+ */
 struct rs485_control {
         unsigned short rts_on_send;
         unsigned short rts_after_sent;
         unsigned long delay_rts_before_send;
         unsigned short enabled;
-#ifdef __KERNEL__
-        int disable_serial_loopback;
-#endif
 };
 
 /* Used with ioctl() TIOCSERWRRS485 */
index b0124e6c2e416d7273fe274a9b36d7d7fb65d093..1265109f4ce3b485ac68623a889cd5a5621c079b 100644 (file)
@@ -4,6 +4,7 @@
 #include <asm/termbits.h>
 #include <asm/ioctls.h>
 #include <asm/rs485.h>
+#include <linux/serial.h>
 
 struct winsize {
        unsigned short ws_row;
index e642c22c80e230f8ad5da30a69b9512838cc34b9..7ba7d70f04d6caaa8d8e5ce0cb31aa37bfc1168b 100644 (file)
@@ -1391,7 +1391,7 @@ static inline void e100_disable_rx_irq(struct e100_serial *info)
 #if defined(CONFIG_ETRAX_RS485)
 /* Enable RS-485 mode on selected port. This is UGLY. */
 static int
-e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r)
+e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r)
 {
        struct e100_serial * info = (struct e100_serial *)tty->driver_data;
 
@@ -1409,13 +1409,11 @@ e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r)
                       CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1);
 #endif
 
-       info->rs485.rts_on_send = 0x01 & r->rts_on_send;
-       info->rs485.rts_after_sent = 0x01 & r->rts_after_sent;
+       info->rs485.flags = r->flags;
        if (r->delay_rts_before_send >= 1000)
                info->rs485.delay_rts_before_send = 1000;
        else
                info->rs485.delay_rts_before_send = r->delay_rts_before_send;
-       info->rs485.enabled = r->enabled;
 /*     printk("rts: on send = %i, after = %i, enabled = %i",
                    info->rs485.rts_on_send,
                    info->rs485.rts_after_sent,
@@ -1430,17 +1428,18 @@ e100_write_rs485(struct tty_struct *tty,
                  const unsigned char *buf, int count)
 {
        struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-       int old_enabled = info->rs485.enabled;
+       int old_value = (info->rs485.flags) & SER_RS485_ENABLED;
 
        /* rs485 is always implicitly enabled if we're using the ioctl()
-        * but it doesn't have to be set in the rs485_control
+        * but it doesn't have to be set in the serial_rs485
         * (to be backward compatible with old apps)
         * So we store, set and restore it.
         */
-       info->rs485.enabled = 1;
+       info->rs485.flags |= SER_RS485_ENABLED;
        /* rs_write now deals with RS485 if enabled */
        count = rs_write(tty, buf, count);
-       info->rs485.enabled = old_enabled;
+       if (!old_value)
+               info->rs485.flags &= ~(SER_RS485_ENABLED);
        return count;
 }
 
@@ -1451,7 +1450,7 @@ static void rs485_toggle_rts_timer_function(unsigned long data)
        struct e100_serial *info = (struct e100_serial *)data;
 
        fast_timers_rs485[info->line].function = NULL;
-       e100_rts(info, info->rs485.rts_after_sent);
+       e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));
 #if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
        e100_enable_rx(info);
        e100_enable_rx_irq(info);
@@ -1647,7 +1646,7 @@ transmit_chars_dma(struct e100_serial *info)
                info->tr_running = 0;
 
 #if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
-               if (info->rs485.enabled) {
+               if (info->rs485.flags & SER_RS485_ENABLED) {
                        /* Set a short timer to toggle RTS */
                        start_one_shot_timer(&fast_timers_rs485[info->line],
                                             rs485_toggle_rts_timer_function,
@@ -2577,7 +2576,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
        info->icount.tx++;
        if (info->xmit.head == info->xmit.tail) {
 #if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
-               if (info->rs485.enabled) {
+               if (info->rs485.flags & SER_RS485_ENABLED) {
                        /* Set a short timer to toggle RTS */
                        start_one_shot_timer(&fast_timers_rs485[info->line],
                                             rs485_toggle_rts_timer_function,
@@ -3218,7 +3217,7 @@ rs_write(struct tty_struct *tty,
 #if defined(CONFIG_ETRAX_RS485)
        struct e100_serial *info = (struct e100_serial *)tty->driver_data;
 
-       if (info->rs485.enabled)
+       if (info->rs485.flags & SER_RS485_ENABLED)
        {
                /* If we are in RS-485 mode, we need to toggle RTS and disable
                 * the receiver before initiating a DMA transfer
@@ -3228,7 +3227,7 @@ rs_write(struct tty_struct *tty,
                fast_timers_rs485[info->line].function = NULL;
                del_fast_timer(&fast_timers_rs485[info->line]);
 #endif
-               e100_rts(info, info->rs485.rts_on_send);
+               e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND));
 #if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
                e100_disable_rx(info);
                e100_enable_rx_irq(info);
@@ -3242,7 +3241,7 @@ rs_write(struct tty_struct *tty,
        count = rs_raw_write(tty, buf, count);
 
 #if defined(CONFIG_ETRAX_RS485)
-       if (info->rs485.enabled)
+       if (info->rs485.flags & SER_RS485_ENABLED)
        {
                unsigned int val;
                /* If we are in RS-485 mode the following has to be done:
@@ -3263,7 +3262,7 @@ rs_write(struct tty_struct *tty,
                        get_lsr_info(info, &val);
                }while (!(val & TIOCSER_TEMT));
 
-               e100_rts(info, info->rs485.rts_after_sent);
+               e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));
 
 #if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
                e100_enable_rx(info);
@@ -3678,14 +3677,52 @@ rs_ioctl(struct tty_struct *tty, struct file * file,
 #if defined(CONFIG_ETRAX_RS485)
        case TIOCSERSETRS485:
        {
+               /* In this ioctl we still use the old structure
+                * rs485_control for backward compatibility
+                * (if we use serial_rs485, then old user-level code
+                * wouldn't work anymore...).
+                * The use of this ioctl is deprecated: use TIOCSRS485
+                * instead.*/
                struct rs485_control rs485ctrl;
+               struct serial_rs485 rs485data;
+               printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n");
                if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg,
                                sizeof(rs485ctrl)))
                        return -EFAULT;
 
-               return e100_enable_rs485(tty, &rs485ctrl);
+               rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send;
+               rs485data.flags = 0;
+               if (rs485ctrl.enabled)
+                       rs485data.flags |= SER_RS485_ENABLED;
+               else
+                       rs485data.flags &= ~(SER_RS485_ENABLED);
+
+               if (rs485ctrl.rts_on_send)
+                       rs485data.flags |= SER_RS485_RTS_ON_SEND;
+               else
+                       rs485data.flags &= ~(SER_RS485_RTS_ON_SEND);
+
+               if (rs485ctrl.rts_after_sent)
+                       rs485data.flags |= SER_RS485_RTS_AFTER_SEND;
+               else
+                       rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND);
+
+               return e100_enable_rs485(tty, &rs485data);
        }
 
+       case TIOCSRS485:
+       {
+               /* This is the new version of TIOCSRS485, with new
+                * data structure serial_rs485 */
+               struct serial_rs485 rs485data;
+               if (copy_from_user(&rs485data, (struct rs485_control *)arg,
+                               sizeof(rs485data)))
+                       return -EFAULT;
+
+               return e100_enable_rs485(tty, &rs485data);
+       }
+
+
        case TIOCSERWRRS485:
        {
                struct rs485_write rs485wr;
@@ -3827,8 +3864,8 @@ rs_close(struct tty_struct *tty, struct file * filp)
        /* port closed */
 
 #if defined(CONFIG_ETRAX_RS485)
-       if (info->rs485.enabled) {
-               info->rs485.enabled = 0;
+       if (info->rs485.flags & SER_RS485_ENABLED) {
+               info->rs485.flags &= ~(SER_RS485_ENABLED);
 #if defined(CONFIG_ETRAX_RS485_ON_PA)
                *R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit);
 #endif
@@ -4493,10 +4530,10 @@ rs_init(void)
 
 #if defined(CONFIG_ETRAX_RS485)
                /* Set sane defaults */
-               info->rs485.rts_on_send = 0;
-               info->rs485.rts_after_sent = 1;
+               info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND);
+               info->rs485.flags |= SER_RS485_RTS_AFTER_SEND;
                info->rs485.delay_rts_before_send = 0;
-               info->rs485.enabled = 0;
+               info->rs485.flags &= ~(SER_RS485_ENABLED);
 #endif
                INIT_WORK(&info->work, do_softint);
 
index f36a729280bcb938919690c5a28bb6bf48ee8e0a..ea0beb46a10d1ae40eb43737d1696a4d7df70576 100644 (file)
@@ -125,7 +125,7 @@ struct e100_serial {
        int errorcode;
 
 #ifdef CONFIG_ETRAX_RS485
-       struct rs485_control    rs485;  /* RS-485 support */
+       struct serial_rs485     rs485;  /* RS-485 support */
 #endif
 };