+++ /dev/null
-/*
- * linux/drivers/i2c/chips/rtc8564.c
- *
- * Copyright (C) 2002-2004 Stefan Eletzhofer
- *
- * based on linux/drivers/acron/char/pcf8583.c
- * Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Driver for system3's EPSON RTC 8564 chip
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/bcd.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/rtc.h> /* get the user-level API */
-#include <linux/init.h>
-
-#include "rtc8564.h"
-
-#ifdef DEBUG
-# define _DBG(x, fmt, args...) do{ if (debug>=x) printk(KERN_DEBUG"%s: " fmt "\n", __FUNCTION__, ##args); } while(0);
-#else
-# define _DBG(x, fmt, args...) do { } while(0);
-#endif
-
-#define _DBGRTCTM(x, rtctm) if (debug>=x) printk("%s: secs=%d, mins=%d, hours=%d, mday=%d, " \
- "mon=%d, year=%d, wday=%d VL=%d\n", __FUNCTION__, \
- (rtctm).secs, (rtctm).mins, (rtctm).hours, (rtctm).mday, \
- (rtctm).mon, (rtctm).year, (rtctm).wday, (rtctm).vl);
-
-struct rtc8564_data {
- struct i2c_client client;
- u16 ctrl;
-};
-
-static inline u8 _rtc8564_ctrl1(struct i2c_client *client)
-{
- struct rtc8564_data *data = i2c_get_clientdata(client);
- return data->ctrl & 0xff;
-}
-static inline u8 _rtc8564_ctrl2(struct i2c_client *client)
-{
- struct rtc8564_data *data = i2c_get_clientdata(client);
- return (data->ctrl & 0xff00) >> 8;
-}
-
-#define CTRL1(c) _rtc8564_ctrl1(c)
-#define CTRL2(c) _rtc8564_ctrl2(c)
-
-static int debug;
-module_param(debug, int, S_IRUGO | S_IWUSR);
-
-static struct i2c_driver rtc8564_driver;
-
-static unsigned short ignore[] = { I2C_CLIENT_END };
-static unsigned short normal_addr[] = { 0x51, I2C_CLIENT_END };
-
-static struct i2c_client_address_data addr_data = {
- .normal_i2c = normal_addr,
- .probe = ignore,
- .ignore = ignore,
-};
-
-static int rtc8564_read_mem(struct i2c_client *client, struct mem *mem);
-static int rtc8564_write_mem(struct i2c_client *client, struct mem *mem);
-
-static int rtc8564_read(struct i2c_client *client, unsigned char adr,
- unsigned char *buf, unsigned char len)
-{
- int ret = -EIO;
- unsigned char addr[1] = { adr };
- struct i2c_msg msgs[2] = {
- {client->addr, 0, 1, addr},
- {client->addr, I2C_M_RD, len, buf}
- };
-
- _DBG(1, "client=%p, adr=%d, buf=%p, len=%d", client, adr, buf, len);
-
- if (!buf) {
- ret = -EINVAL;
- goto done;
- }
-
- ret = i2c_transfer(client->adapter, msgs, 2);
- if (ret == 2) {
- ret = 0;
- }
-
-done:
- return ret;
-}
-
-static int rtc8564_write(struct i2c_client *client, unsigned char adr,
- unsigned char *data, unsigned char len)
-{
- int ret = 0;
- unsigned char _data[16];
- struct i2c_msg wr;
- int i;
-
- if (!data || len > 15) {
- ret = -EINVAL;
- goto done;
- }
-
- _DBG(1, "client=%p, adr=%d, buf=%p, len=%d", client, adr, data, len);
-
- _data[0] = adr;
- for (i = 0; i < len; i++) {
- _data[i + 1] = data[i];
- _DBG(5, "data[%d] = 0x%02x (%d)", i, data[i], data[i]);
- }
-
- wr.addr = client->addr;
- wr.flags = 0;
- wr.len = len + 1;
- wr.buf = _data;
-
- ret = i2c_transfer(client->adapter, &wr, 1);
- if (ret == 1) {
- ret = 0;
- }
-
-done:
- return ret;
-}
-
-static int rtc8564_attach(struct i2c_adapter *adap, int addr, int kind)
-{
- int ret;
- struct i2c_client *new_client;
- struct rtc8564_data *d;
- unsigned char data[10];
- unsigned char ad[1] = { 0 };
- struct i2c_msg ctrl_wr[1] = {
- {addr, 0, 2, data}
- };
- struct i2c_msg ctrl_rd[2] = {
- {addr, 0, 1, ad},
- {addr, I2C_M_RD, 2, data}
- };
-
- d = kzalloc(sizeof(struct rtc8564_data), GFP_KERNEL);
- if (!d) {
- ret = -ENOMEM;
- goto done;
- }
- new_client = &d->client;
-
- strlcpy(new_client->name, "RTC8564", I2C_NAME_SIZE);
- i2c_set_clientdata(new_client, d);
- new_client->addr = addr;
- new_client->adapter = adap;
- new_client->driver = &rtc8564_driver;
-
- _DBG(1, "client=%p", new_client);
-
- /* init ctrl1 reg */
- data[0] = 0;
- data[1] = 0;
- ret = i2c_transfer(new_client->adapter, ctrl_wr, 1);
- if (ret != 1) {
- printk(KERN_INFO "rtc8564: cant init ctrl1\n");
- ret = -ENODEV;
- goto done;
- }
-
- /* read back ctrl1 and ctrl2 */
- ret = i2c_transfer(new_client->adapter, ctrl_rd, 2);
- if (ret != 2) {
- printk(KERN_INFO "rtc8564: cant read ctrl\n");
- ret = -ENODEV;
- goto done;
- }
-
- d->ctrl = data[0] | (data[1] << 8);
-
- _DBG(1, "RTC8564_REG_CTRL1=%02x, RTC8564_REG_CTRL2=%02x",
- data[0], data[1]);
-
- ret = i2c_attach_client(new_client);
-done:
- if (ret) {
- kfree(d);
- }
- return ret;
-}
-
-static int rtc8564_probe(struct i2c_adapter *adap)
-{
- return i2c_probe(adap, &addr_data, rtc8564_attach);
-}
-
-static int rtc8564_detach(struct i2c_client *client)
-{
- i2c_detach_client(client);
- kfree(i2c_get_clientdata(client));
- return 0;
-}
-
-static int rtc8564_get_datetime(struct i2c_client *client, struct rtc_tm *dt)
-{
- int ret = -EIO;
- unsigned char buf[15];
-
- _DBG(1, "client=%p, dt=%p", client, dt);
-
- if (!dt)
- return -EINVAL;
-
- memset(buf, 0, sizeof(buf));
-
- ret = rtc8564_read(client, 0, buf, 15);
- if (ret)
- return ret;
-
- /* century stored in minute alarm reg */
- dt->year = BCD2BIN(buf[RTC8564_REG_YEAR]);
- dt->year += 100 * BCD2BIN(buf[RTC8564_REG_AL_MIN] & 0x3f);
- dt->mday = BCD2BIN(buf[RTC8564_REG_DAY] & 0x3f);
- dt->wday = BCD2BIN(buf[RTC8564_REG_WDAY] & 7);
- dt->mon = BCD2BIN(buf[RTC8564_REG_MON_CENT] & 0x1f);
-
- dt->secs = BCD2BIN(buf[RTC8564_REG_SEC] & 0x7f);
- dt->vl = (buf[RTC8564_REG_SEC] & 0x80) == 0x80;
- dt->mins = BCD2BIN(buf[RTC8564_REG_MIN] & 0x7f);
- dt->hours = BCD2BIN(buf[RTC8564_REG_HR] & 0x3f);
-
- _DBGRTCTM(2, *dt);
-
- return 0;
-}
-
-static int
-rtc8564_set_datetime(struct i2c_client *client, struct rtc_tm *dt, int datetoo)
-{
- int ret, len = 5;
- unsigned char buf[15];
-
- _DBG(1, "client=%p, dt=%p", client, dt);
-
- if (!dt)
- return -EINVAL;
-
- _DBGRTCTM(2, *dt);
-
- buf[RTC8564_REG_CTRL1] = CTRL1(client) | RTC8564_CTRL1_STOP;
- buf[RTC8564_REG_CTRL2] = CTRL2(client);
- buf[RTC8564_REG_SEC] = BIN2BCD(dt->secs);
- buf[RTC8564_REG_MIN] = BIN2BCD(dt->mins);
- buf[RTC8564_REG_HR] = BIN2BCD(dt->hours);
-
- if (datetoo) {
- len += 5;
- buf[RTC8564_REG_DAY] = BIN2BCD(dt->mday);
- buf[RTC8564_REG_WDAY] = BIN2BCD(dt->wday);
- buf[RTC8564_REG_MON_CENT] = BIN2BCD(dt->mon) & 0x1f;
- /* century stored in minute alarm reg */
- buf[RTC8564_REG_YEAR] = BIN2BCD(dt->year % 100);
- buf[RTC8564_REG_AL_MIN] = BIN2BCD(dt->year / 100);
- }
-
- ret = rtc8564_write(client, 0, buf, len);
- if (ret) {
- _DBG(1, "error writing data! %d", ret);
- }
-
- buf[RTC8564_REG_CTRL1] = CTRL1(client);
- ret = rtc8564_write(client, 0, buf, 1);
- if (ret) {
- _DBG(1, "error writing data! %d", ret);
- }
-
- return ret;
-}
-
-static int rtc8564_get_ctrl(struct i2c_client *client, unsigned int *ctrl)
-{
- struct rtc8564_data *data = i2c_get_clientdata(client);
-
- if (!ctrl)
- return -1;
-
- *ctrl = data->ctrl;
- return 0;
-}
-
-static int rtc8564_set_ctrl(struct i2c_client *client, unsigned int *ctrl)
-{
- struct rtc8564_data *data = i2c_get_clientdata(client);
- unsigned char buf[2];
-
- if (!ctrl)
- return -1;
-
- buf[0] = *ctrl & 0xff;
- buf[1] = (*ctrl & 0xff00) >> 8;
- data->ctrl = *ctrl;
-
- return rtc8564_write(client, 0, buf, 2);
-}
-
-static int rtc8564_read_mem(struct i2c_client *client, struct mem *mem)
-{
-
- if (!mem)
- return -EINVAL;
-
- return rtc8564_read(client, mem->loc, mem->data, mem->nr);
-}
-
-static int rtc8564_write_mem(struct i2c_client *client, struct mem *mem)
-{
-
- if (!mem)
- return -EINVAL;
-
- return rtc8564_write(client, mem->loc, mem->data, mem->nr);
-}
-
-static int
-rtc8564_command(struct i2c_client *client, unsigned int cmd, void *arg)
-{
-
- _DBG(1, "cmd=%d", cmd);
-
- switch (cmd) {
- case RTC_GETDATETIME:
- return rtc8564_get_datetime(client, arg);
-
- case RTC_SETTIME:
- return rtc8564_set_datetime(client, arg, 0);
-
- case RTC_SETDATETIME:
- return rtc8564_set_datetime(client, arg, 1);
-
- case RTC_GETCTRL:
- return rtc8564_get_ctrl(client, arg);
-
- case RTC_SETCTRL:
- return rtc8564_set_ctrl(client, arg);
-
- case MEM_READ:
- return rtc8564_read_mem(client, arg);
-
- case MEM_WRITE:
- return rtc8564_write_mem(client, arg);
-
- default:
- return -EINVAL;
- }
-}
-
-static struct i2c_driver rtc8564_driver = {
- .driver = {
- .name = "RTC8564",
- },
- .id = I2C_DRIVERID_RTC8564,
- .attach_adapter = rtc8564_probe,
- .detach_client = rtc8564_detach,
- .command = rtc8564_command
-};
-
-static __init int rtc8564_init(void)
-{
- return i2c_add_driver(&rtc8564_driver);
-}
-
-static __exit void rtc8564_exit(void)
-{
- i2c_del_driver(&rtc8564_driver);
-}
-
-MODULE_AUTHOR("Stefan Eletzhofer <Stefan.Eletzhofer@eletztrick.de>");
-MODULE_DESCRIPTION("EPSON RTC8564 Driver");
-MODULE_LICENSE("GPL");
-
-module_init(rtc8564_init);
-module_exit(rtc8564_exit);
+++ /dev/null
-/*
- * x1205.c - An i2c driver for the Xicor X1205 RTC
- * Copyright 2004 Karen Spearel
- * Copyright 2005 Alessandro Zummo
- *
- * please send all reports to:
- * kas11 at tampabay dot rr dot com
- * a dot zummo at towertech dot it
- *
- * based on the other drivers in this same directory.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/string.h>
-#include <linux/bcd.h>
-#include <linux/rtc.h>
-#include <linux/list.h>
-
-#include <linux/x1205.h>
-
-#define DRV_VERSION "0.9.9"
-
-/* Addresses to scan: none. This chip is located at
- * 0x6f and uses a two bytes register addressing.
- * Two bytes need to be written to read a single register,
- * while most other chips just require one and take the second
- * one as the data to be written. To prevent corrupting
- * unknown chips, the user must explicitely set the probe parameter.
- */
-
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD;
-I2C_CLIENT_MODULE_PARM(hctosys,
- "Set the system time from the hardware clock upon initialization");
-
-/* offsets into CCR area */
-
-#define CCR_SEC 0
-#define CCR_MIN 1
-#define CCR_HOUR 2
-#define CCR_MDAY 3
-#define CCR_MONTH 4
-#define CCR_YEAR 5
-#define CCR_WDAY 6
-#define CCR_Y2K 7
-
-#define X1205_REG_SR 0x3F /* status register */
-#define X1205_REG_Y2K 0x37
-#define X1205_REG_DW 0x36
-#define X1205_REG_YR 0x35
-#define X1205_REG_MO 0x34
-#define X1205_REG_DT 0x33
-#define X1205_REG_HR 0x32
-#define X1205_REG_MN 0x31
-#define X1205_REG_SC 0x30
-#define X1205_REG_DTR 0x13
-#define X1205_REG_ATR 0x12
-#define X1205_REG_INT 0x11
-#define X1205_REG_0 0x10
-#define X1205_REG_Y2K1 0x0F
-#define X1205_REG_DWA1 0x0E
-#define X1205_REG_YRA1 0x0D
-#define X1205_REG_MOA1 0x0C
-#define X1205_REG_DTA1 0x0B
-#define X1205_REG_HRA1 0x0A
-#define X1205_REG_MNA1 0x09
-#define X1205_REG_SCA1 0x08
-#define X1205_REG_Y2K0 0x07
-#define X1205_REG_DWA0 0x06
-#define X1205_REG_YRA0 0x05
-#define X1205_REG_MOA0 0x04
-#define X1205_REG_DTA0 0x03
-#define X1205_REG_HRA0 0x02
-#define X1205_REG_MNA0 0x01
-#define X1205_REG_SCA0 0x00
-
-#define X1205_CCR_BASE 0x30 /* Base address of CCR */
-#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
-
-#define X1205_SR_RTCF 0x01 /* Clock failure */
-#define X1205_SR_WEL 0x02 /* Write Enable Latch */
-#define X1205_SR_RWEL 0x04 /* Register Write Enable */
-
-#define X1205_DTR_DTR0 0x01
-#define X1205_DTR_DTR1 0x02
-#define X1205_DTR_DTR2 0x04
-
-#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
-
-/* Prototypes */
-static int x1205_attach(struct i2c_adapter *adapter);
-static int x1205_detach(struct i2c_client *client);
-static int x1205_probe(struct i2c_adapter *adapter, int address, int kind);
-static int x1205_command(struct i2c_client *client, unsigned int cmd,
- void *arg);
-
-static struct i2c_driver x1205_driver = {
- .driver = {
- .name = "x1205",
- },
- .attach_adapter = &x1205_attach,
- .detach_client = &x1205_detach,
-};
-
-struct x1205_data {
- struct i2c_client client;
- struct list_head list;
- unsigned int epoch;
-};
-
-static const unsigned char days_in_mo[] =
- { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-
-static LIST_HEAD(x1205_clients);
-
-/* Workaround until the I2C subsytem will allow to send
- * commands to a specific client. This function will send the command
- * to the first client.
- */
-int x1205_do_command(unsigned int cmd, void *arg)
-{
- struct list_head *walk;
- struct list_head *tmp;
- struct x1205_data *data;
-
- list_for_each_safe(walk, tmp, &x1205_clients) {
- data = list_entry(walk, struct x1205_data, list);
- return x1205_command(&data->client, cmd, arg);
- }
-
- return -ENODEV;
-}
-
-#define is_leap(year) \
- ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
-
-/* make sure the rtc_time values are in bounds */
-static int x1205_validate_tm(struct rtc_time *tm)
-{
- int year = tm->tm_year + 1900;
-
- if ((tm->tm_year < 70) || (tm->tm_year > 255))
- return -EINVAL;
-
- if ((tm->tm_mon > 11) || (tm->tm_mday == 0))
- return -EINVAL;
-
- if (tm->tm_mday > days_in_mo[tm->tm_mon]
- + ((tm->tm_mon == 1) && is_leap(year)))
- return -EINVAL;
-
- if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60))
- return -EINVAL;
-
- return 0;
-}
-
-/*
- * In the routines that deal directly with the x1205 hardware, we use
- * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
- * Epoch is initialized as 2000. Time is set to UTC.
- */
-static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
- u8 reg_base)
-{
- unsigned char dt_addr[2] = { 0, reg_base };
- static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
-
- unsigned char buf[8], sr;
-
- struct i2c_msg msgs[] = {
- { client->addr, 0, 2, sr_addr }, /* setup read ptr */
- { client->addr, I2C_M_RD, 1, &sr }, /* read status */
- { client->addr, 0, 2, dt_addr }, /* setup read ptr */
- { client->addr, I2C_M_RD, 8, buf }, /* read date */
- };
-
- struct x1205_data *data = i2c_get_clientdata(client);
-
- /* read status register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
- return -EIO;
- }
-
- /* check for battery failure */
- if (sr & X1205_SR_RTCF) {
- dev_warn(&client->dev,
- "Clock had a power failure, you must set the date.\n");
- return -EINVAL;
- }
-
- /* read date registers */
- if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
- return -EIO;
- }
-
- dev_dbg(&client->dev,
- "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
- "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
- __FUNCTION__,
- buf[0], buf[1], buf[2], buf[3],
- buf[4], buf[5], buf[6], buf[7]);
-
- tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
- tm->tm_min = BCD2BIN(buf[CCR_MIN]);
- tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
- tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
- tm->tm_mon = BCD2BIN(buf[CCR_MONTH]);
- data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100;
- tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900;
- tm->tm_wday = buf[CCR_WDAY];
-
- dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
- "mday=%d, mon=%d, year=%d, wday=%d\n",
- __FUNCTION__,
- tm->tm_sec, tm->tm_min, tm->tm_hour,
- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-
- return 0;
-}
-
-static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
- int datetoo, u8 reg_base)
-{
- int i, err, xfer;
-
- unsigned char buf[8];
-
- static const unsigned char wel[3] = { 0, X1205_REG_SR,
- X1205_SR_WEL };
-
- static const unsigned char rwel[3] = { 0, X1205_REG_SR,
- X1205_SR_WEL | X1205_SR_RWEL };
-
- static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-
- struct x1205_data *data = i2c_get_clientdata(client);
-
- /* check if all values in the tm struct are correct */
- if ((err = x1205_validate_tm(tm)) < 0)
- return err;
-
- dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
- "mday=%d, mon=%d, year=%d, wday=%d\n",
- __FUNCTION__,
- tm->tm_sec, tm->tm_min, tm->tm_hour,
- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-
- buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
- buf[CCR_MIN] = BIN2BCD(tm->tm_min);
-
- /* set hour and 24hr bit */
- buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL;
-
- /* should we also set the date? */
- if (datetoo) {
- buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
-
- /* month, 0 - 11 */
- buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);
-
- /* year, since 1900 */
- buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch);
- buf[CCR_WDAY] = tm->tm_wday & 0x07;
- buf[CCR_Y2K] = BIN2BCD(data->epoch / 100);
- }
-
- /* this sequence is required to unlock the chip */
- xfer = i2c_master_send(client, wel, 3);
- if (xfer != 3) {
- dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer);
- return -EIO;
- }
-
- xfer = i2c_master_send(client, rwel, 3);
- if (xfer != 3) {
- dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer);
- return -EIO;
- }
-
- /* write register's data */
- for (i = 0; i < (datetoo ? 8 : 3); i++) {
- unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
-
- xfer = i2c_master_send(client, rdata, 3);
- if (xfer != 3) {
- dev_err(&client->dev,
- "%s: xfer=%d addr=%02x, data=%02x\n",
- __FUNCTION__,
- xfer, rdata[1], rdata[2]);
- return -EIO;
- }
- };
-
- /* disable further writes */
- xfer = i2c_master_send(client, diswe, 3);
- if (xfer != 3) {
- dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer);
- return -EIO;
- }
-
- return 0;
-}
-
-static int x1205_get_dtrim(struct i2c_client *client, int *trim)
-{
- unsigned char dtr;
- static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR };
-
- struct i2c_msg msgs[] = {
- { client->addr, 0, 2, dtr_addr }, /* setup read ptr */
- { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */
- };
-
- /* read dtr register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
- return -EIO;
- }
-
- dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr);
-
- *trim = 0;
-
- if (dtr & X1205_DTR_DTR0)
- *trim += 20;
-
- if (dtr & X1205_DTR_DTR1)
- *trim += 10;
-
- if (dtr & X1205_DTR_DTR2)
- *trim = -*trim;
-
- return 0;
-}
-
-static int x1205_get_atrim(struct i2c_client *client, int *trim)
-{
- s8 atr;
- static unsigned char atr_addr[2] = { 0, X1205_REG_ATR };
-
- struct i2c_msg msgs[] = {
- { client->addr, 0, 2, atr_addr }, /* setup read ptr */
- { client->addr, I2C_M_RD, 1, &atr }, /* read atr */
- };
-
- /* read atr register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
- return -EIO;
- }
-
- dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr);
-
- /* atr is a two's complement value on 6 bits,
- * perform sign extension. The formula is
- * Catr = (atr * 0.25pF) + 11.00pF.
- */
- if (atr & 0x20)
- atr |= 0xC0;
-
- dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr);
-
- *trim = (atr * 250) + 11000;
-
- dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim);
-
- return 0;
-}
-
-static int x1205_hctosys(struct i2c_client *client)
-{
- int err;
-
- struct rtc_time tm;
- struct timespec tv;
-
- err = x1205_command(client, X1205_CMD_GETDATETIME, &tm);
-
- if (err) {
- dev_err(&client->dev,
- "Unable to set the system clock\n");
- return err;
- }
-
- /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
- * whether it stores the most close value or the value with partial
- * seconds truncated. However, it is important that we use it to store
- * the truncated value. This is because otherwise it is necessary,
- * in an rtc sync function, to read both xtime.tv_sec and
- * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read
- * of >32bits is not possible. So storing the most close value would
- * slow down the sync API. So here we have the truncated value and
- * the best guess is to add 0.5s.
- */
-
- tv.tv_nsec = NSEC_PER_SEC >> 1;
-
- /* WARNING: this is not the C library 'mktime' call, it is a built in
- * inline function from include/linux/time.h. It expects (requires)
- * the month to be in the range 1-12
- */
-
- tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1,
- tm.tm_mday, tm.tm_hour,
- tm.tm_min, tm.tm_sec);
-
- do_settimeofday(&tv);
-
- dev_info(&client->dev,
- "setting the system clock to %d-%d-%d %d:%d:%d\n",
- tm.tm_year + 1900, tm.tm_mon + 1,
- tm.tm_mday, tm.tm_hour, tm.tm_min,
- tm.tm_sec);
-
- return 0;
-}
-
-struct x1205_limit
-{
- unsigned char reg;
- unsigned char mask;
- unsigned char min;
- unsigned char max;
-};
-
-static int x1205_validate_client(struct i2c_client *client)
-{
- int i, xfer;
-
- /* Probe array. We will read the register at the specified
- * address and check if the given bits are zero.
- */
- static const unsigned char probe_zero_pattern[] = {
- /* register, mask */
- X1205_REG_SR, 0x18,
- X1205_REG_DTR, 0xF8,
- X1205_REG_ATR, 0xC0,
- X1205_REG_INT, 0x18,
- X1205_REG_0, 0xFF,
- };
-
- static const struct x1205_limit probe_limits_pattern[] = {
- /* register, mask, min, max */
- { X1205_REG_Y2K, 0xFF, 19, 20 },
- { X1205_REG_DW, 0xFF, 0, 6 },
- { X1205_REG_YR, 0xFF, 0, 99 },
- { X1205_REG_MO, 0xFF, 0, 12 },
- { X1205_REG_DT, 0xFF, 0, 31 },
- { X1205_REG_HR, 0x7F, 0, 23 },
- { X1205_REG_MN, 0xFF, 0, 59 },
- { X1205_REG_SC, 0xFF, 0, 59 },
- { X1205_REG_Y2K1, 0xFF, 19, 20 },
- { X1205_REG_Y2K0, 0xFF, 19, 20 },
- };
-
- /* check that registers have bits a 0 where expected */
- for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) {
- unsigned char buf;
-
- unsigned char addr[2] = { 0, probe_zero_pattern[i] };
-
- struct i2c_msg msgs[2] = {
- { client->addr, 0, 2, addr },
- { client->addr, I2C_M_RD, 1, &buf },
- };
-
- xfer = i2c_transfer(client->adapter, msgs, 2);
- if (xfer != 2) {
- dev_err(&client->adapter->dev,
- "%s: could not read register %x\n",
- __FUNCTION__, addr[1]);
-
- return -EIO;
- }
-
- if ((buf & probe_zero_pattern[i+1]) != 0) {
- dev_err(&client->adapter->dev,
- "%s: register=%02x, zero pattern=%d, value=%x\n",
- __FUNCTION__, addr[1], i, buf);
-
- return -ENODEV;
- }
- }
-
- /* check limits (only registers with bcd values) */
- for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) {
- unsigned char reg, value;
-
- unsigned char addr[2] = { 0, probe_limits_pattern[i].reg };
-
- struct i2c_msg msgs[2] = {
- { client->addr, 0, 2, addr },
- { client->addr, I2C_M_RD, 1, ® },
- };
-
- xfer = i2c_transfer(client->adapter, msgs, 2);
-
- if (xfer != 2) {
- dev_err(&client->adapter->dev,
- "%s: could not read register %x\n",
- __FUNCTION__, addr[1]);
-
- return -EIO;
- }
-
- value = BCD2BIN(reg & probe_limits_pattern[i].mask);
-
- if (value > probe_limits_pattern[i].max ||
- value < probe_limits_pattern[i].min) {
- dev_dbg(&client->adapter->dev,
- "%s: register=%x, lim pattern=%d, value=%d\n",
- __FUNCTION__, addr[1], i, value);
-
- return -ENODEV;
- }
- }
-
- return 0;
-}
-
-static int x1205_attach(struct i2c_adapter *adapter)
-{
- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-
- return i2c_probe(adapter, &addr_data, x1205_probe);
-}
-
-int x1205_direct_attach(int adapter_id,
- struct i2c_client_address_data *address_data)
-{
- int err;
- struct i2c_adapter *adapter = i2c_get_adapter(adapter_id);
-
- if (adapter) {
- err = i2c_probe(adapter,
- address_data, x1205_probe);
-
- i2c_put_adapter(adapter);
-
- return err;
- }
-
- return -ENODEV;
-}
-
-static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
-{
- struct i2c_client *client;
- struct x1205_data *data;
-
- int err = 0;
-
- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
- err = -ENODEV;
- goto exit;
- }
-
- if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) {
- err = -ENOMEM;
- goto exit;
- }
-
- /* Initialize our structures */
- data->epoch = 2000;
-
- client = &data->client;
- client->addr = address;
- client->driver = &x1205_driver;
- client->adapter = adapter;
-
- strlcpy(client->name, "x1205", I2C_NAME_SIZE);
-
- i2c_set_clientdata(client, data);
-
- /* Verify the chip is really an X1205 */
- if (kind < 0) {
- if (x1205_validate_client(client) < 0) {
- err = -ENODEV;
- goto exit_kfree;
- }
- }
-
- /* Inform the i2c layer */
- if ((err = i2c_attach_client(client)))
- goto exit_kfree;
-
- list_add(&data->list, &x1205_clients);
-
- dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-
- /* If requested, set the system time */
- if (hctosys)
- x1205_hctosys(client);
-
- return 0;
-
-exit_kfree:
- kfree(data);
-
-exit:
- return err;
-}
-
-static int x1205_detach(struct i2c_client *client)
-{
- int err;
- struct x1205_data *data = i2c_get_clientdata(client);
-
- dev_dbg(&client->dev, "%s\n", __FUNCTION__);
-
- if ((err = i2c_detach_client(client)))
- return err;
-
- list_del(&data->list);
-
- kfree(data);
-
- return 0;
-}
-
-static int x1205_command(struct i2c_client *client, unsigned int cmd,
- void *param)
-{
- if (param == NULL)
- return -EINVAL;
-
- if (!capable(CAP_SYS_TIME))
- return -EACCES;
-
- dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd);
-
- switch (cmd) {
- case X1205_CMD_GETDATETIME:
- return x1205_get_datetime(client, param, X1205_CCR_BASE);
-
- case X1205_CMD_SETTIME:
- return x1205_set_datetime(client, param, 0,
- X1205_CCR_BASE);
-
- case X1205_CMD_SETDATETIME:
- return x1205_set_datetime(client, param, 1,
- X1205_CCR_BASE);
-
- case X1205_CMD_GETALARM:
- return x1205_get_datetime(client, param, X1205_ALM0_BASE);
-
- case X1205_CMD_SETALARM:
- return x1205_set_datetime(client, param, 1,
- X1205_ALM0_BASE);
-
- case X1205_CMD_GETDTRIM:
- return x1205_get_dtrim(client, param);
-
- case X1205_CMD_GETATRIM:
- return x1205_get_atrim(client, param);
-
- default:
- return -EINVAL;
- }
-}
-
-static int __init x1205_init(void)
-{
- return i2c_add_driver(&x1205_driver);
-}
-
-static void __exit x1205_exit(void)
-{
- i2c_del_driver(&x1205_driver);
-}
-
-MODULE_AUTHOR(
- "Karen Spearel <kas11@tampabay.rr.com>, "
- "Alessandro Zummo <a.zummo@towertech.it>");
-MODULE_DESCRIPTION("Xicor X1205 RTC driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-EXPORT_SYMBOL_GPL(x1205_do_command);
-EXPORT_SYMBOL_GPL(x1205_direct_attach);
-
-module_init(x1205_init);
-module_exit(x1205_exit);
projects / linux-2.6-omap-h63xx.git / commitdiff