]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[MTD] [MAPS] Remove the bast-flash driver.
authorBen Dooks <ben-linux@fluff.org>
Wed, 9 Jul 2008 13:09:20 +0000 (14:09 +0100)
committerDavid Woodhouse <David.Woodhouse@intel.com>
Fri, 11 Jul 2008 17:20:59 +0000 (18:20 +0100)
Remove the Simtec BAST flash driver as this has been replaced by using
the platform flash driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
drivers/mtd/maps/Kconfig
drivers/mtd/maps/Makefile
drivers/mtd/maps/bast-flash.c [deleted file]

index d2d339a7598d8397dd3d67da1cedadd0aa7ff7b9..ef1e29ea5a2c0cdecbd87d16784468218cf4db61 100644 (file)
@@ -556,24 +556,6 @@ config MTD_DMV182
         help
           Map driver for Dy-4 SVME/DMV-182 board.
 
-config MTD_BAST
-       tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000"
-       depends on ARCH_BAST || MACH_VR1000
-       select MTD_PARTITIONS
-       select MTD_MAP_BANK_WIDTH_16
-       select MTD_JEDECPROBE
-       help
-         Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the
-         Thorcom VR1000
-
-         Note, this driver *cannot* over-ride the WP link on the
-         board, or currently detect the state of the link.
-
-config MTD_BAST_MAXSIZE
-       int "Maximum size for BAST flash area (MiB)"
-       depends on MTD_BAST
-       default "4"
-
 config MTD_SHARP_SL
        tristate "ROM mapped on Sharp SL Series"
        depends on ARCH_PXA
index f3b0c59516639ac95fcc4f950d45493497fa1e06..b29ea54606571b5377e0a068dbf872f4cfc0ba12 100644 (file)
@@ -9,7 +9,6 @@ endif
 # Chip mappings
 obj-$(CONFIG_MTD_CDB89712)     += cdb89712.o
 obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
-obj-$(CONFIG_MTD_BAST)         += bast-flash.o
 obj-$(CONFIG_MTD_CFI_FLAGADM)  += cfi_flagadm.o
 obj-$(CONFIG_MTD_DC21285)      += dc21285.o
 obj-$(CONFIG_MTD_DILNETPC)     += dilnetpc.o
diff --git a/drivers/mtd/maps/bast-flash.c b/drivers/mtd/maps/bast-flash.c
deleted file mode 100644 (file)
index ca54148..0000000
+++ /dev/null
@@ -1,224 +0,0 @@
-/* linux/drivers/mtd/maps/bast-flash.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *     Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec Bast (EB2410ITX) NOR MTD Mapping driver
- *
- * Changelog:
- *     20-Sep-2004  BJD  Initial version
- *     17-Jan-2005  BJD  Add whole device if no partitions found
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/mach/flash.h>
-
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-cpld.h>
-
-#ifdef CONFIG_MTD_BAST_MAXSIZE
-#define AREA_MAXSIZE (CONFIG_MTD_BAST_MAXSIZE * SZ_1M)
-#else
-#define AREA_MAXSIZE (32 * SZ_1M)
-#endif
-
-#define PFX "bast-flash: "
-
-struct bast_flash_info {
-       struct mtd_info         *mtd;
-       struct map_info          map;
-       struct mtd_partition    *partitions;
-       struct resource         *area;
-};
-
-static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-
-static void bast_flash_setrw(int to)
-{
-       unsigned int val;
-       unsigned long flags;
-
-       local_irq_save(flags);
-       val = __raw_readb(BAST_VA_CTRL3);
-
-       if (to)
-               val |= BAST_CPLD_CTRL3_ROMWEN;
-       else
-               val &= ~BAST_CPLD_CTRL3_ROMWEN;
-
-       pr_debug("new cpld ctrl3=%02x\n", val);
-
-       __raw_writeb(val, BAST_VA_CTRL3);
-       local_irq_restore(flags);
-}
-
-static int bast_flash_remove(struct platform_device *pdev)
-{
-       struct bast_flash_info *info = platform_get_drvdata(pdev);
-
-       platform_set_drvdata(pdev, NULL);
-
-       if (info == NULL)
-               return 0;
-
-       if (info->map.virt != NULL)
-               iounmap(info->map.virt);
-
-       if (info->mtd) {
-               del_mtd_partitions(info->mtd);
-               map_destroy(info->mtd);
-       }
-
-       kfree(info->partitions);
-
-       if (info->area) {
-               release_resource(info->area);
-               kfree(info->area);
-       }
-
-       kfree(info);
-
-       return 0;
-}
-
-static int bast_flash_probe(struct platform_device *pdev)
-{
-       struct bast_flash_info *info;
-       struct resource *res;
-       int err = 0;
-
-       info = kmalloc(sizeof(*info), GFP_KERNEL);
-       if (info == NULL) {
-               printk(KERN_ERR PFX "no memory for flash info\n");
-               err = -ENOMEM;
-               goto exit_error;
-       }
-
-       memzero(info, sizeof(*info));
-       platform_set_drvdata(pdev, info);
-
-       res = pdev->resource;  /* assume that the flash has one resource */
-
-       info->map.phys = res->start;
-       info->map.size = res->end - res->start + 1;
-       info->map.name = pdev->dev.bus_id;
-       info->map.bankwidth = 2;
-
-       if (info->map.size > AREA_MAXSIZE)
-               info->map.size = AREA_MAXSIZE;
-
-       pr_debug("%s: area %08lx, size %ld\n", __func__,
-                info->map.phys, info->map.size);
-
-       info->area = request_mem_region(res->start, info->map.size,
-                                       pdev->name);
-       if (info->area == NULL) {
-               printk(KERN_ERR PFX "cannot reserve flash memory region\n");
-               err = -ENOENT;
-               goto exit_error;
-       }
-
-       info->map.virt = ioremap(res->start, info->map.size);
-       pr_debug("%s: virt at %08x\n", __func__, (int)info->map.virt);
-
-       if (info->map.virt == 0) {
-               printk(KERN_ERR PFX "failed to ioremap() region\n");
-               err = -EIO;
-               goto exit_error;
-       }
-
-       simple_map_init(&info->map);
-
-       /* enable the write to the flash area */
-
-       bast_flash_setrw(1);
-
-       /* probe for the device(s) */
-
-       info->mtd = do_map_probe("jedec_probe", &info->map);
-       if (info->mtd == NULL)
-               info->mtd = do_map_probe("cfi_probe", &info->map);
-
-       if (info->mtd == NULL) {
-               printk(KERN_ERR PFX "map_probe() failed\n");
-               err = -ENXIO;
-               goto exit_error;
-       }
-
-       /* mark ourselves as the owner */
-       info->mtd->owner = THIS_MODULE;
-
-       err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0);
-       if (err > 0) {
-               err = add_mtd_partitions(info->mtd, info->partitions, err);
-               if (err)
-                       printk(KERN_ERR PFX "cannot add/parse partitions\n");
-       } else {
-               err = add_mtd_device(info->mtd);
-       }
-
-       if (err == 0)
-               return 0;
-
-       /* fall through to exit error */
-
- exit_error:
-       bast_flash_remove(pdev);
-       return err;
-}
-
-static struct platform_driver bast_flash_driver = {
-       .probe          = bast_flash_probe,
-       .remove         = bast_flash_remove,
-       .driver         = {
-               .name   = "bast-nor",
-               .owner  = THIS_MODULE,
-       },
-};
-
-static int __init bast_flash_init(void)
-{
-       printk("BAST NOR-Flash Driver, (c) 2004 Simtec Electronics\n");
-       return platform_driver_register(&bast_flash_driver);
-}
-
-static void __exit bast_flash_exit(void)
-{
-       platform_driver_unregister(&bast_flash_driver);
-}
-
-module_init(bast_flash_init);
-module_exit(bast_flash_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("BAST MTD Map driver");
-MODULE_ALIAS("platform:bast-nor");