* by the Free Software Foundation.
*/
+/dts-v1/;
/ {
model = "MPC8610HPCD";
PowerPC,8610@0 {
device_type = "cpu";
reg = <0>;
- d-cache-line-size = <d# 32>; // bytes
- i-cache-line-size = <d# 32>; // bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>; // L1
+ i-cache-size = <32768>; // L1
+ timebase-frequency = <0>; // From uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
};
memory {
device_type = "memory";
- reg = <00000000 20000000>; // 512M at 0x0
+ reg = <0x00000000 0x20000000>; // 512M at 0x0
};
soc@e0000000 {
#interrupt-cells = <2>;
device_type = "soc";
compatible = "fsl,mpc8610-immr", "simple-bus";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 1000>;
+ ranges = <0x0 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x1000>;
bus-frequency = <0>;
i2c@3000 {
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
- cs4270:codec@4f {
+ cs4270:codec@4f {
compatible = "cirrus,cs4270";
- reg = <4f>;
+ reg = <0x4f>;
/* MCLK source is a stand-alone oscillator */
- clock-frequency = <bb8000>;
- };
+ clock-frequency = <12288000>;
+ };
};
i2c@3100 {
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>;
+ reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>;
+ reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <1c 2>;
+ interrupts = <28 2>;
interrupt-parent = <&mpic>;
};
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
global-utilities@e0000 {
compatible = "fsl,mpc8610-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
i2s@16000 {
compatible = "fsl,mpc8610-ssi";
cell-index = <0>;
- reg = <16000 100>;
+ reg = <0x16000 0x100>;
interrupt-parent = <&mpic>;
- interrupts = <3e 2>;
+ interrupts = <62 2>;
fsl,mode = "i2s-slave";
codec-handle = <&cs4270>;
};
ssi@16100 {
compatible = "fsl,mpc8610-ssi";
cell-index = <1>;
- reg = <16100 100>;
+ reg = <0x16100 0x100>;
interrupt-parent = <&mpic>;
- interrupts = <3f 2>;
+ interrupts = <63 2>;
};
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
- cell-index = <0>;
- reg = <21300 4>; /* DMA general status register */
- ranges = <0 21100 200>;
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
+ cell-index = <0>;
+ reg = <0x21300 0x4>; /* DMA general status register */
+ ranges = <0x0 0x21100 0x200>;
- dma-channel@0 {
+ dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,eloplus-dma-channel";
cell-index = <0>;
- reg = <0 80>;
+ reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <14 2>;
- };
- dma-channel@1 {
+ interrupts = <20 2>;
+ };
+ dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,eloplus-dma-channel";
cell-index = <1>;
- reg = <80 80>;
+ reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <15 2>;
- };
- dma-channel@2 {
+ interrupts = <21 2>;
+ };
+ dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,eloplus-dma-channel";
cell-index = <2>;
- reg = <100 80>;
+ reg = <0x100 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
- dma-channel@3 {
+ interrupts = <22 2>;
+ };
+ dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,eloplus-dma-channel";
cell-index = <3>;
- reg = <180 80>;
+ reg = <0x180 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <17 2>;
- };
- };
+ interrupts = <23 2>;
+ };
+ };
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
- cell-index = <1>;
- reg = <c300 4>; /* DMA general status register */
- ranges = <0 c100 200>;
+ dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
+ cell-index = <1>;
+ reg = <0xc300 0x4>; /* DMA general status register */
+ ranges = <0x0 0xc100 0x200>;
- dma-channel@0 {
+ dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,mpc8540-dma-channel";
cell-index = <0>;
- reg = <0 80>;
+ reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <3c 2>;
- };
- dma-channel@1 {
+ interrupts = <60 2>;
+ };
+ dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,mpc8540-dma-channel";
cell-index = <1>;
- reg = <80 80>;
+ reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <3d 2>;
- };
- dma-channel@2 {
+ interrupts = <61 2>;
+ };
+ dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,mpc8540-dma-channel";
cell-index = <2>;
- reg = <100 80>;
+ reg = <0x100 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <3e 2>;
- };
- dma-channel@3 {
+ interrupts = <62 2>;
+ };
+ dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
"fsl,mpc8540-dma-channel";
cell-index = <3>;
- reg = <180 80>;
+ reg = <0x180 0x80>;
interrupt-parent = <&mpic>;
- interrupts = <3f 2>;
- };
- };
+ interrupts = <63 2>;
+ };
+ };
};
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008000 1000>;
+ reg = <0xe0008000 0x1000>;
bus-range = <0 0>;
- ranges = <02000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 e1000000 0 00100000>;
- clock-frequency = <1fca055>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <24 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 &mpic 4 1
- 8800 0 0 2 &mpic 5 1
- 8800 0 0 3 &mpic 6 1
- 8800 0 0 4 &mpic 7 1
+ 0x8800 0 0 1 &mpic 4 1
+ 0x8800 0 0 2 &mpic 5 1
+ 0x8800 0 0 3 &mpic 6 1
+ 0x8800 0 0 4 &mpic 7 1
/* IDSEL 0x12 */
- 9000 0 0 1 &mpic 5 1
- 9000 0 0 2 &mpic 6 1
- 9000 0 0 3 &mpic 7 1
- 9000 0 0 4 &mpic 4 1
+ 0x9000 0 0 1 &mpic 5 1
+ 0x9000 0 0 2 &mpic 6 1
+ 0x9000 0 0 3 &mpic 7 1
+ 0x9000 0 0 4 &mpic 4 1
>;
};
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e000a000 1000>;
+ reg = <0xe000a000 0x1000>;
bus-range = <1 3>;
- ranges = <02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 e3000000 0 00100000>;
- clock-frequency = <1fca055>;
+ ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <26 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x1b */
- d800 0 0 1 &mpic 2 1
+ 0xd800 0 0 1 &mpic 2 1
/* IDSEL 0x1c*/
- e000 0 0 1 &mpic 1 1
- e000 0 0 2 &mpic 1 1
- e000 0 0 3 &mpic 1 1
- e000 0 0 4 &mpic 1 1
+ 0xe000 0 0 1 &mpic 1 1
+ 0xe000 0 0 2 &mpic 1 1
+ 0xe000 0 0 3 &mpic 1 1
+ 0xe000 0 0 4 &mpic 1 1
/* IDSEL 0x1f */
- f800 0 0 1 &mpic 3 0
- f800 0 0 2 &mpic 0 1
+ 0xf800 0 0 1 &mpic 3 0
+ 0xf800 0 0 2 &mpic 0 1
>;
pcie@0 {
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 10000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ ranges = <0x02000000 0x0 0xa0000000
+ 0x02000000 0x0 0xa0000000
+ 0x0 0x10000000
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
uli1575@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 10000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ ranges = <0x02000000 0x0 0xa0000000
+ 0x02000000 0x0 0xa0000000
+ 0x0 0x10000000
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
};
};
};
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC8641HPCN";
PowerPC,8641@0 {
device_type = "cpu";
reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>; // L1
+ i-cache-size = <32768>; // L1
+ timebase-frequency = <0>; // From uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
};
PowerPC,8641@1 {
device_type = "cpu";
reg = <1>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
- timebase-frequency = <0>; // 33 MHz, from uboot
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
+ timebase-frequency = <0>; // From uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
};
memory {
device_type = "memory";
- reg = <00000000 40000000>; // 1G at 0x0
+ reg = <0x00000000 0x40000000>; // 1G at 0x0
};
localbus@f8005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
- reg = <f8005000 1000>;
- interrupts = <13 2>;
+ reg = <0xf8005000 0x1000>;
+ interrupts = <19 2>;
interrupt-parent = <&mpic>;
- ranges = <0 0 ff800000 00800000
- 1 0 fe000000 01000000
- 2 0 f8200000 00100000
- 3 0 f8100000 00100000>;
+ ranges = <0 0 0xff800000 0x00800000
+ 1 0 0xfe000000 0x01000000
+ 2 0 0xf8200000 0x00100000
+ 3 0 0xf8100000 0x00100000>;
flash@0,0 {
compatible = "cfi-flash";
- reg = <0 0 00800000>;
+ reg = <0 0 0x00800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
- reg = <00000000 00300000>;
+ reg = <0x00000000 0x00300000>;
};
partition@300000 {
label = "firmware b";
- reg = <00300000 00100000>;
+ reg = <0x00300000 0x00100000>;
read-only;
};
partition@400000 {
label = "fs";
- reg = <00400000 00300000>;
+ reg = <0x00400000 0x00300000>;
};
partition@700000 {
label = "firmware a";
- reg = <00700000 00100000>;
+ reg = <0x00700000 0x00100000>;
read-only;
};
};
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
- ranges = <00000000 f8000000 00100000>;
- reg = <f8000000 00001000>; // CCSRBAR
+ ranges = <0x00000000 0xf8000000 0x00100000>;
+ reg = <0xf8000000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
i2c@3000 {
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <2b 2>;
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <2b 2>;
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
+ interrupts = <10 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
+ interrupts = <10 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
+ interrupts = <10 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
- interrupts = <a 1>;
+ interrupts = <10 1>;
reg = <3>;
device_type = "ethernet-phy";
};
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1d 2 1e 2 22 2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 2 24 2 28 2>;
+ interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <26000 1000>;
+ reg = <0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1F 2 20 2 21 2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <27000 1000>;
+ reg = <0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <25 2 26 2 27 2>;
+ interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>;
+ reg = <0x4500 0x100>;
clock-frequency = <0>;
- interrupts = <2a 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>;
+ reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <1c 2>;
+ interrupts = <28 2>;
interrupt-parent = <&mpic>;
};
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 40000>;
+ reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
global-utilities@e0000 {
compatible = "fsl,mpc8641-guts";
- reg = <e0000 1000>;
+ reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <f8008000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <1fca055>;
+ reg = <0xf8008000 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- interrupt-map-mask = <ff00 0 0 7>;
+ interrupts = <24 2>;
+ interrupt-map-mask = <0xff00 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
- 8800 0 0 1 &mpic 2 1
- 8800 0 0 2 &mpic 3 1
- 8800 0 0 3 &mpic 4 1
- 8800 0 0 4 &mpic 1 1
+ 0x8800 0 0 1 &mpic 2 1
+ 0x8800 0 0 2 &mpic 3 1
+ 0x8800 0 0 3 &mpic 4 1
+ 0x8800 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 1 - PCI slot 1 */
- 8900 0 0 1 &mpic 2 1
- 8900 0 0 2 &mpic 3 1
- 8900 0 0 3 &mpic 4 1
- 8900 0 0 4 &mpic 1 1
+ 0x8900 0 0 1 &mpic 2 1
+ 0x8900 0 0 2 &mpic 3 1
+ 0x8900 0 0 3 &mpic 4 1
+ 0x8900 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 2 - PCI slot 1 */
- 8a00 0 0 1 &mpic 2 1
- 8a00 0 0 2 &mpic 3 1
- 8a00 0 0 3 &mpic 4 1
- 8a00 0 0 4 &mpic 1 1
+ 0x8a00 0 0 1 &mpic 2 1
+ 0x8a00 0 0 2 &mpic 3 1
+ 0x8a00 0 0 3 &mpic 4 1
+ 0x8a00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 3 - PCI slot 1 */
- 8b00 0 0 1 &mpic 2 1
- 8b00 0 0 2 &mpic 3 1
- 8b00 0 0 3 &mpic 4 1
- 8b00 0 0 4 &mpic 1 1
+ 0x8b00 0 0 1 &mpic 2 1
+ 0x8b00 0 0 2 &mpic 3 1
+ 0x8b00 0 0 3 &mpic 4 1
+ 0x8b00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 4 - PCI slot 1 */
- 8c00 0 0 1 &mpic 2 1
- 8c00 0 0 2 &mpic 3 1
- 8c00 0 0 3 &mpic 4 1
- 8c00 0 0 4 &mpic 1 1
+ 0x8c00 0 0 1 &mpic 2 1
+ 0x8c00 0 0 2 &mpic 3 1
+ 0x8c00 0 0 3 &mpic 4 1
+ 0x8c00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 5 - PCI slot 1 */
- 8d00 0 0 1 &mpic 2 1
- 8d00 0 0 2 &mpic 3 1
- 8d00 0 0 3 &mpic 4 1
- 8d00 0 0 4 &mpic 1 1
+ 0x8d00 0 0 1 &mpic 2 1
+ 0x8d00 0 0 2 &mpic 3 1
+ 0x8d00 0 0 3 &mpic 4 1
+ 0x8d00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 6 - PCI slot 1 */
- 8e00 0 0 1 &mpic 2 1
- 8e00 0 0 2 &mpic 3 1
- 8e00 0 0 3 &mpic 4 1
- 8e00 0 0 4 &mpic 1 1
+ 0x8e00 0 0 1 &mpic 2 1
+ 0x8e00 0 0 2 &mpic 3 1
+ 0x8e00 0 0 3 &mpic 4 1
+ 0x8e00 0 0 4 &mpic 1 1
/* IDSEL 0x11 func 7 - PCI slot 1 */
- 8f00 0 0 1 &mpic 2 1
- 8f00 0 0 2 &mpic 3 1
- 8f00 0 0 3 &mpic 4 1
- 8f00 0 0 4 &mpic 1 1
+ 0x8f00 0 0 1 &mpic 2 1
+ 0x8f00 0 0 2 &mpic 3 1
+ 0x8f00 0 0 3 &mpic 4 1
+ 0x8f00 0 0 4 &mpic 1 1
/* IDSEL 0x12 func 0 - PCI slot 2 */
- 9000 0 0 1 &mpic 3 1
- 9000 0 0 2 &mpic 4 1
- 9000 0 0 3 &mpic 1 1
- 9000 0 0 4 &mpic 2 1
+ 0x9000 0 0 1 &mpic 3 1
+ 0x9000 0 0 2 &mpic 4 1
+ 0x9000 0 0 3 &mpic 1 1
+ 0x9000 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 1 - PCI slot 2 */
- 9100 0 0 1 &mpic 3 1
- 9100 0 0 2 &mpic 4 1
- 9100 0 0 3 &mpic 1 1
- 9100 0 0 4 &mpic 2 1
+ 0x9100 0 0 1 &mpic 3 1
+ 0x9100 0 0 2 &mpic 4 1
+ 0x9100 0 0 3 &mpic 1 1
+ 0x9100 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 2 - PCI slot 2 */
- 9200 0 0 1 &mpic 3 1
- 9200 0 0 2 &mpic 4 1
- 9200 0 0 3 &mpic 1 1
- 9200 0 0 4 &mpic 2 1
+ 0x9200 0 0 1 &mpic 3 1
+ 0x9200 0 0 2 &mpic 4 1
+ 0x9200 0 0 3 &mpic 1 1
+ 0x9200 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 3 - PCI slot 2 */
- 9300 0 0 1 &mpic 3 1
- 9300 0 0 2 &mpic 4 1
- 9300 0 0 3 &mpic 1 1
- 9300 0 0 4 &mpic 2 1
+ 0x9300 0 0 1 &mpic 3 1
+ 0x9300 0 0 2 &mpic 4 1
+ 0x9300 0 0 3 &mpic 1 1
+ 0x9300 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 4 - PCI slot 2 */
- 9400 0 0 1 &mpic 3 1
- 9400 0 0 2 &mpic 4 1
- 9400 0 0 3 &mpic 1 1
- 9400 0 0 4 &mpic 2 1
+ 0x9400 0 0 1 &mpic 3 1
+ 0x9400 0 0 2 &mpic 4 1
+ 0x9400 0 0 3 &mpic 1 1
+ 0x9400 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 5 - PCI slot 2 */
- 9500 0 0 1 &mpic 3 1
- 9500 0 0 2 &mpic 4 1
- 9500 0 0 3 &mpic 1 1
- 9500 0 0 4 &mpic 2 1
+ 0x9500 0 0 1 &mpic 3 1
+ 0x9500 0 0 2 &mpic 4 1
+ 0x9500 0 0 3 &mpic 1 1
+ 0x9500 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 6 - PCI slot 2 */
- 9600 0 0 1 &mpic 3 1
- 9600 0 0 2 &mpic 4 1
- 9600 0 0 3 &mpic 1 1
- 9600 0 0 4 &mpic 2 1
+ 0x9600 0 0 1 &mpic 3 1
+ 0x9600 0 0 2 &mpic 4 1
+ 0x9600 0 0 3 &mpic 1 1
+ 0x9600 0 0 4 &mpic 2 1
/* IDSEL 0x12 func 7 - PCI slot 2 */
- 9700 0 0 1 &mpic 3 1
- 9700 0 0 2 &mpic 4 1
- 9700 0 0 3 &mpic 1 1
- 9700 0 0 4 &mpic 2 1
+ 0x9700 0 0 1 &mpic 3 1
+ 0x9700 0 0 2 &mpic 4 1
+ 0x9700 0 0 3 &mpic 1 1
+ 0x9700 0 0 4 &mpic 2 1
// IDSEL 0x1c USB
- e000 0 0 1 &i8259 c 2
- e100 0 0 2 &i8259 9 2
- e200 0 0 3 &i8259 a 2
- e300 0 0 4 &i8259 b 2
+ 0xe000 0 0 1 &i8259 12 2
+ 0xe100 0 0 2 &i8259 9 2
+ 0xe200 0 0 3 &i8259 10 2
+ 0xe300 0 0 4 &i8259 112
// IDSEL 0x1d Audio
- e800 0 0 1 &i8259 6 2
+ 0xe800 0 0 1 &i8259 6 2
// IDSEL 0x1e Legacy
- f000 0 0 1 &i8259 7 2
- f100 0 0 1 &i8259 7 2
+ 0xf000 0 0 1 &i8259 7 2
+ 0xf100 0 0 1 &i8259 7 2
// IDSEL 0x1f IDE/SATA
- f800 0 0 1 &i8259 e 2
- f900 0 0 1 &i8259 5 2
+ 0xf800 0 0 1 &i8259 14 2
+ 0xf900 0 0 1 &i8259 5 2
>;
pcie@0 {
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
uli1575@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
- ranges = <02000000 0 80000000
- 02000000 0 80000000
- 0 20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ ranges = <0x02000000 0x0 0x80000000
+ 0x02000000 0x0 0x80000000
+ 0x0 0x20000000
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
- reg = <f000 0 0 0 0>;
- ranges = <1 0 01000000 0 0
- 00001000>;
+ reg = <0xf000 0 0 0 0>;
+ ranges = <1 0 0x01000000 0 0
+ 0x00001000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
- reg = <1 20 2
- 1 a0 2
- 1 4d0 2>;
+ reg = <1 0x20 2
+ 1 0xa0 2
+ 1 0x4d0 2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
- reg = <1 60 1 1 64 1>;
- interrupts = <1 3 c 3>;
+ reg = <1 0x60 1 1 0x64 1>;
+ interrupts = <1 3 12 3>;
interrupt-parent =
<&i8259>;
rtc@70 {
compatible =
"pnpPNP,b00";
- reg = <1 70 2>;
+ reg = <1 0x70 2>;
};
gpio@400 {
- reg = <1 400 80>;
+ reg = <1 0x400 0x80>;
};
};
};
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <f8009000 1000>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 00100000>;
- clock-frequency = <1fca055>;
+ reg = <0xf8009000 0x1000>;
+ bus-range = <0 0xff>;
+ ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+ clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
- interrupts = <19 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupts = <25 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
- 0000 0 0 1 &mpic 4 1
- 0000 0 0 2 &mpic 5 1
- 0000 0 0 3 &mpic 6 1
- 0000 0 0 4 &mpic 7 1
+ 0x0000 0 0 1 &mpic 4 1
+ 0x0000 0 0 2 &mpic 5 1
+ 0x0000 0 0 3 &mpic 6 1
+ 0x0000 0 0 4 &mpic 7 1
>;
pcie@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- ranges = <02000000 0 a0000000
- 02000000 0 a0000000
- 0 20000000
+ ranges = <0x02000000 0x0 0xa0000000
+ 0x02000000 0x0 0xa0000000
+ 0x0 0x20000000
- 01000000 0 00000000
- 01000000 0 00000000
- 0 00100000>;
+ 0x01000000 0x0 0x00000000
+ 0x01000000 0x0 0x00000000
+ 0x0 0x00100000>;
};
};
};
projects / linux-2.6-omap-h63xx.git / commitdiff