if BLOCK
-config EXT2_FS
- tristate "Second extended fs support"
- help
- Ext2 is a standard Linux file system for hard disks.
-
- To compile this file system support as a module, choose M here: the
- module will be called ext2.
-
- If unsure, say Y.
-
-config EXT2_FS_XATTR
- bool "Ext2 extended attributes"
- depends on EXT2_FS
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config EXT2_FS_POSIX_ACL
- bool "Ext2 POSIX Access Control Lists"
- depends on EXT2_FS_XATTR
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config EXT2_FS_SECURITY
- bool "Ext2 Security Labels"
- depends on EXT2_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ext2 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config EXT2_FS_XIP
- bool "Ext2 execute in place support"
- depends on EXT2_FS && MMU
- help
- Execute in place can be used on memory-backed block devices. If you
- enable this option, you can select to mount block devices which are
- capable of this feature without using the page cache.
-
- If you do not use a block device that is capable of using this,
- or if unsure, say N.
+source "fs/ext2/Kconfig"
+source "fs/ext3/Kconfig"
+source "fs/ext4/Kconfig"
config FS_XIP
# execute in place
depends on EXT2_FS_XIP
default y
-config EXT3_FS
- tristate "Ext3 journalling file system support"
- select JBD
- help
- This is the journalling version of the Second extended file system
- (often called ext3), the de facto standard Linux file system
- (method to organize files on a storage device) for hard disks.
-
- The journalling code included in this driver means you do not have
- to run e2fsck (file system checker) on your file systems after a
- crash. The journal keeps track of any changes that were being made
- at the time the system crashed, and can ensure that your file system
- is consistent without the need for a lengthy check.
-
- Other than adding the journal to the file system, the on-disk format
- of ext3 is identical to ext2. It is possible to freely switch
- between using the ext3 driver and the ext2 driver, as long as the
- file system has been cleanly unmounted, or e2fsck is run on the file
- system.
-
- To add a journal on an existing ext2 file system or change the
- behavior of ext3 file systems, you can use the tune2fs utility ("man
- tune2fs"). To modify attributes of files and directories on ext3
- file systems, use chattr ("man chattr"). You need to be using
- e2fsprogs version 1.20 or later in order to create ext3 journals
- (available at <http://sourceforge.net/projects/e2fsprogs/>).
-
- To compile this file system support as a module, choose M here: the
- module will be called ext3.
-
-config EXT3_FS_XATTR
- bool "Ext3 extended attributes"
- depends on EXT3_FS
- default y
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
- You need this for POSIX ACL support on ext3.
-
-config EXT3_FS_POSIX_ACL
- bool "Ext3 POSIX Access Control Lists"
- depends on EXT3_FS_XATTR
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config EXT3_FS_SECURITY
- bool "Ext3 Security Labels"
- depends on EXT3_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ext3 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config EXT4_FS
- tristate "The Extended 4 (ext4) filesystem"
- select JBD2
- select CRC16
- help
- This is the next generation of the ext3 filesystem.
-
- Unlike the change from ext2 filesystem to ext3 filesystem,
- the on-disk format of ext4 is not forwards compatible with
- ext3; it is based on extent maps and it supports 48-bit
- physical block numbers. The ext4 filesystem also supports delayed
- allocation, persistent preallocation, high resolution time stamps,
- and a number of other features to improve performance and speed
- up fsck time. For more information, please see the web pages at
- http://ext4.wiki.kernel.org.
-
- The ext4 filesystem will support mounting an ext3
- filesystem; while there will be some performance gains from
- the delayed allocation and inode table readahead, the best
- performance gains will require enabling ext4 features in the
- filesystem, or formating a new filesystem as an ext4
- filesystem initially.
-
- To compile this file system support as a module, choose M here. The
- module will be called ext4.
-
- If unsure, say N.
-
-config EXT4DEV_COMPAT
- bool "Enable ext4dev compatibility"
- depends on EXT4_FS
- help
- Starting with 2.6.28, the name of the ext4 filesystem was
- renamed from ext4dev to ext4. Unfortunately there are some
- legacy userspace programs (such as klibc's fstype) have
- "ext4dev" hardcoded.
-
- To enable backwards compatibility so that systems that are
- still expecting to mount ext4 filesystems using ext4dev,
- chose Y here. This feature will go away by 2.6.31, so
- please arrange to get your userspace programs fixed!
-
-config EXT4_FS_XATTR
- bool "Ext4 extended attributes"
- depends on EXT4_FS
- default y
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
- You need this for POSIX ACL support on ext4.
-
-config EXT4_FS_POSIX_ACL
- bool "Ext4 POSIX Access Control Lists"
- depends on EXT4_FS_XATTR
- select FS_POSIX_ACL
- help
- POSIX Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the POSIX ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config EXT4_FS_SECURITY
- bool "Ext4 Security Labels"
- depends on EXT4_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ext4 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JBD
- tristate
- help
- This is a generic journalling layer for block devices. It is
- currently used by the ext3 file system, but it could also be
- used to add journal support to other file systems or block
- devices such as RAID or LVM.
-
- If you are using the ext3 file system, you need to say Y here.
- If you are not using ext3 then you will probably want to say N.
-
- To compile this device as a module, choose M here: the module will be
- called jbd. If you are compiling ext3 into the kernel, you
- cannot compile this code as a module.
-
-config JBD_DEBUG
- bool "JBD (ext3) debugging support"
- depends on JBD && DEBUG_FS
- help
- If you are using the ext3 journaled file system (or potentially any
- other file system/device using JBD), this option allows you to
- enable debugging output while the system is running, in order to
- help track down any problems you are having. By default the
- debugging output will be turned off.
-
- If you select Y here, then you will be able to turn on debugging
- with "echo N > /sys/kernel/debug/jbd/jbd-debug", where N is a
- number between 1 and 5, the higher the number, the more debugging
- output is generated. To turn debugging off again, do
- "echo 0 > /sys/kernel/debug/jbd/jbd-debug".
-
-config JBD2
- tristate
- select CRC32
- help
- This is a generic journaling layer for block devices that support
- both 32-bit and 64-bit block numbers. It is currently used by
- the ext4 and OCFS2 filesystems, but it could also be used to add
- journal support to other file systems or block devices such
- as RAID or LVM.
-
- If you are using ext4 or OCFS2, you need to say Y here.
- If you are not using ext4 or OCFS2 then you will
- probably want to say N.
-
- To compile this device as a module, choose M here. The module will be
- called jbd2. If you are compiling ext4 or OCFS2 into the kernel,
- you cannot compile this code as a module.
-
-config JBD2_DEBUG
- bool "JBD2 (ext4) debugging support"
- depends on JBD2 && DEBUG_FS
- help
- If you are using the ext4 journaled file system (or
- potentially any other filesystem/device using JBD2), this option
- allows you to enable debugging output while the system is running,
- in order to help track down any problems you are having.
- By default, the debugging output will be turned off.
-
- If you select Y here, then you will be able to turn on debugging
- with "echo N > /sys/kernel/debug/jbd2/jbd2-debug", where N is a
- number between 1 and 5. The higher the number, the more debugging
- output is generated. To turn debugging off again, do
- "echo 0 > /sys/kernel/debug/jbd2/jbd2-debug".
+source "fs/jbd/Kconfig"
+source "fs/jbd2/Kconfig"
config FS_MBCACHE
# Meta block cache for Extended Attributes (ext2/ext3/ext4)
--- /dev/null
+config EXT3_FS
+ tristate "Ext3 journalling file system support"
+ select JBD
+ help
+ This is the journalling version of the Second extended file system
+ (often called ext3), the de facto standard Linux file system
+ (method to organize files on a storage device) for hard disks.
+
+ The journalling code included in this driver means you do not have
+ to run e2fsck (file system checker) on your file systems after a
+ crash. The journal keeps track of any changes that were being made
+ at the time the system crashed, and can ensure that your file system
+ is consistent without the need for a lengthy check.
+
+ Other than adding the journal to the file system, the on-disk format
+ of ext3 is identical to ext2. It is possible to freely switch
+ between using the ext3 driver and the ext2 driver, as long as the
+ file system has been cleanly unmounted, or e2fsck is run on the file
+ system.
+
+ To add a journal on an existing ext2 file system or change the
+ behavior of ext3 file systems, you can use the tune2fs utility ("man
+ tune2fs"). To modify attributes of files and directories on ext3
+ file systems, use chattr ("man chattr"). You need to be using
+ e2fsprogs version 1.20 or later in order to create ext3 journals
+ (available at <http://sourceforge.net/projects/e2fsprogs/>).
+
+ To compile this file system support as a module, choose M here: the
+ module will be called ext3.
+
+config EXT3_FS_XATTR
+ bool "Ext3 extended attributes"
+ depends on EXT3_FS
+ default y
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+ You need this for POSIX ACL support on ext3.
+
+config EXT3_FS_POSIX_ACL
+ bool "Ext3 POSIX Access Control Lists"
+ depends on EXT3_FS_XATTR
+ select FS_POSIX_ACL
+ help
+ Posix Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the Posix ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config EXT3_FS_SECURITY
+ bool "Ext3 Security Labels"
+ depends on EXT3_FS_XATTR
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the ext3 filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
--- /dev/null
+config EXT4_FS
+ tristate "The Extended 4 (ext4) filesystem"
+ select JBD2
+ select CRC16
+ help
+ This is the next generation of the ext3 filesystem.
+
+ Unlike the change from ext2 filesystem to ext3 filesystem,
+ the on-disk format of ext4 is not forwards compatible with
+ ext3; it is based on extent maps and it supports 48-bit
+ physical block numbers. The ext4 filesystem also supports delayed
+ allocation, persistent preallocation, high resolution time stamps,
+ and a number of other features to improve performance and speed
+ up fsck time. For more information, please see the web pages at
+ http://ext4.wiki.kernel.org.
+
+ The ext4 filesystem will support mounting an ext3
+ filesystem; while there will be some performance gains from
+ the delayed allocation and inode table readahead, the best
+ performance gains will require enabling ext4 features in the
+ filesystem, or formating a new filesystem as an ext4
+ filesystem initially.
+
+ To compile this file system support as a module, choose M here. The
+ module will be called ext4.
+
+ If unsure, say N.
+
+config EXT4DEV_COMPAT
+ bool "Enable ext4dev compatibility"
+ depends on EXT4_FS
+ help
+ Starting with 2.6.28, the name of the ext4 filesystem was
+ renamed from ext4dev to ext4. Unfortunately there are some
+ legacy userspace programs (such as klibc's fstype) have
+ "ext4dev" hardcoded.
+
+ To enable backwards compatibility so that systems that are
+ still expecting to mount ext4 filesystems using ext4dev,
+ chose Y here. This feature will go away by 2.6.31, so
+ please arrange to get your userspace programs fixed!
+
+config EXT4_FS_XATTR
+ bool "Ext4 extended attributes"
+ depends on EXT4_FS
+ default y
+ help
+ Extended attributes are name:value pairs associated with inodes by
+ the kernel or by users (see the attr(5) manual page, or visit
+ <http://acl.bestbits.at/> for details).
+
+ If unsure, say N.
+
+ You need this for POSIX ACL support on ext4.
+
+config EXT4_FS_POSIX_ACL
+ bool "Ext4 POSIX Access Control Lists"
+ depends on EXT4_FS_XATTR
+ select FS_POSIX_ACL
+ help
+ POSIX Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
+
+ To learn more about Access Control Lists, visit the POSIX ACLs for
+ Linux website <http://acl.bestbits.at/>.
+
+ If you don't know what Access Control Lists are, say N
+
+config EXT4_FS_SECURITY
+ bool "Ext4 Security Labels"
+ depends on EXT4_FS_XATTR
+ help
+ Security labels support alternative access control models
+ implemented by security modules like SELinux. This option
+ enables an extended attribute handler for file security
+ labels in the ext4 filesystem.
+
+ If you are not using a security module that requires using
+ extended attributes for file security labels, say N.
projects / linux-2.6-omap-h63xx.git / commitdiff