hwmon: (adm1031) Various cleanups

* Rename new_client to client
* Drop redundant initializations to 0
* Drop trailing space
* Other whitespace cleanups
* Split/fold a few long lines
* Constify static data
* Optimizations in set_fan_div()

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 558d83b25b689bef689633ca83da8cf23465de7a..b3e358c65d02263a1fe9978fc375faad45aa94a3 100644 (file)
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -5,7 +5,7 @@
   Supports adm1030 / adm1031
   Copyright (C) 2004 Alexandre d'Alton <alex@alexdalton.org>
   Reworked by Jean Delvare <khali@linux-fr.org>
-  
+
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
@@ -32,22 +32,22 @@
 
 /* Following macros takes channel parameter starting from 0 to 2 */
 #define ADM1031_REG_FAN_SPEED(nr)      (0x08 + (nr))
-#define ADM1031_REG_FAN_DIV(nr)                (0x20  + (nr))
+#define ADM1031_REG_FAN_DIV(nr)                (0x20 + (nr))
 #define ADM1031_REG_PWM                        (0x22)
 #define ADM1031_REG_FAN_MIN(nr)                (0x10 + (nr))
 
-#define ADM1031_REG_TEMP_MAX(nr)       (0x14  + 4*(nr))
-#define ADM1031_REG_TEMP_MIN(nr)       (0x15  + 4*(nr))
-#define ADM1031_REG_TEMP_CRIT(nr)      (0x16  + 4*(nr))
+#define ADM1031_REG_TEMP_MAX(nr)       (0x14 + 4 * (nr))
+#define ADM1031_REG_TEMP_MIN(nr)       (0x15 + 4 * (nr))
+#define ADM1031_REG_TEMP_CRIT(nr)      (0x16 + 4 * (nr))
 
-#define ADM1031_REG_TEMP(nr)           (0xa + (nr))
+#define ADM1031_REG_TEMP(nr)           (0x0a + (nr))
 #define ADM1031_REG_AUTO_TEMP(nr)      (0x24 + (nr))
 
 #define ADM1031_REG_STATUS(nr)         (0x2 + (nr))
 
-#define ADM1031_REG_CONF1              0x0
-#define ADM1031_REG_CONF2              0x1
-#define ADM1031_REG_EXT_TEMP           0x6
+#define ADM1031_REG_CONF1              0x00
+#define ADM1031_REG_CONF2              0x01
+#define ADM1031_REG_EXT_TEMP           0x06
 
 #define ADM1031_CONF1_MONITOR_ENABLE   0x01    /* Monitoring enable */
 #define ADM1031_CONF1_PWM_INVERT       0x08    /* PWM Invert */
@@ -78,7 +78,7 @@ struct adm1031_data {
        /* The chan_select_table contains the possible configurations for
         * auto fan control.
         */
-       auto_chan_table_t *chan_select_table;
+       const auto_chan_table_t *chan_select_table;
        u16 alarm;
        u8 conf1;
        u8 conf2;
@@ -181,25 +181,25 @@ static int AUTO_TEMP_MAX_TO_REG(int val, int reg, int pwm)
 #define GET_FAN_AUTO_BITFIELD(data, idx)       \
        (*(data)->chan_select_table)[FAN_CHAN_FROM_REG((data)->conf1)][idx%2]
 
-/* The tables below contains the possible values for the auto fan 
+/* The tables below contains the possible values for the auto fan
  * control bitfields. the index in the table is the register value.
  * MSb is the auto fan control enable bit, so the four first entries
  * in the table disables auto fan control when both bitfields are zero.
  */
-static auto_chan_table_t auto_channel_select_table_adm1031 = {
-       {0, 0}, {0, 0}, {0, 0}, {0, 0},
-       {2 /*0b010 */ , 4 /*0b100 */ },
-       {2 /*0b010 */ , 2 /*0b010 */ },
-       {4 /*0b100 */ , 4 /*0b100 */ },
-       {7 /*0b111 */ , 7 /*0b111 */ },
+static const auto_chan_table_t auto_channel_select_table_adm1031 = {
+       { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 },
+       { 2 /* 0b010 */ , 4 /* 0b100 */ },
+       { 2 /* 0b010 */ , 2 /* 0b010 */ },
+       { 4 /* 0b100 */ , 4 /* 0b100 */ },
+       { 7 /* 0b111 */ , 7 /* 0b111 */ },
 };
 
-static auto_chan_table_t auto_channel_select_table_adm1030 = {
-       {0, 0}, {0, 0}, {0, 0}, {0, 0},
-       {2 /*0b10 */            , 0},
-       {0xff /*invalid */      , 0},
-       {0xff /*invalid */      , 0},
-       {3 /*0b11 */            , 0},
+static const auto_chan_table_t auto_channel_select_table_adm1030 = {
+       { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 },
+       { 2 /* 0b10 */          , 0 },
+       { 0xff /* invalid */    , 0 },
+       { 0xff /* invalid */    , 0 },
+       { 3 /* 0b11 */          , 0 },
 };
 
 /* That function checks if a bitfield is valid and returns the other bitfield
@@ -228,8 +228,8 @@ get_fan_auto_nearest(struct adm1031_data *data,
                        break;
                } else if (val == (*data->chan_select_table)[i][chan] &&
                           first_match == -1) {
-                       /* Save the first match in case of an exact match has not been
-                        * found 
+                       /* Save the first match in case of an exact match has
+                        * not been found
                         */
                        first_match = i;
                }
@@ -264,16 +264,17 @@ set_fan_auto_channel(struct device *dev, const char *buf, size_t count, int nr)
        old_fan_mode = data->conf1;
 
        mutex_lock(&data->update_lock);
-       
+
        if ((ret = get_fan_auto_nearest(data, nr, val, data->conf1, &reg))) {
                mutex_unlock(&data->update_lock);
                return ret;
        }
-       if (((data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1)) & ADM1031_CONF1_AUTO_MODE) ^ 
+       data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1);
+       if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) ^
            (old_fan_mode & ADM1031_CONF1_AUTO_MODE)) {
                if (data->conf1 & ADM1031_CONF1_AUTO_MODE){
-                       /* Switch to Auto Fan Mode 
-                        * Save PWM registers 
+                       /* Switch to Auto Fan Mode
+                        * Save PWM registers
                         * Set PWM registers to 33% Both */
                        data->old_pwm[0] = data->pwm[0];
                        data->old_pwm[1] = data->pwm[1];
@@ -283,7 +284,7 @@ set_fan_auto_channel(struct device *dev, const char *buf, size_t count, int nr)
                        data->pwm[0] = data->old_pwm[0];
                        data->pwm[1] = data->old_pwm[1];
                        /* Restore PWM registers */
-                       adm1031_write_value(client, ADM1031_REG_PWM, 
+                       adm1031_write_value(client, ADM1031_REG_PWM,
                                            data->pwm[0] | (data->pwm[1] << 4));
                }
        }
@@ -314,7 +315,7 @@ fan_auto_channel_offset(2);
 static ssize_t show_auto_temp_off(struct device *dev, char *buf, int nr)
 {
        struct adm1031_data *data = adm1031_update_device(dev);
-       return sprintf(buf, "%d\n", 
+       return sprintf(buf, "%d\n",
                       AUTO_TEMP_OFF_FROM_REG(data->auto_temp[nr]));
 }
 static ssize_t show_auto_temp_min(struct device *dev, char *buf, int nr)
@@ -407,7 +408,7 @@ set_pwm(struct device *dev, const char *buf, size_t count, int nr)
        int reg;
 
        mutex_lock(&data->update_lock);
-       if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) && 
+       if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) &&
            (((val>>4) & 0xf) != 5)) {
                /* In automatic mode, the only PWM accepted is 33% */
                mutex_unlock(&data->update_lock);
@@ -471,7 +472,7 @@ static int trust_fan_readings(struct adm1031_data *data, int chan)
                            AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[0])
                            || data->temp[1] >=
                            AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1])
-                           || (data->chip_type == adm1031 
+                           || (data->chip_type == adm1031
                                && data->temp[2] >=
                                AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]));
                        break;
@@ -514,7 +515,7 @@ set_fan_min(struct device *dev, const char *buf, size_t count, int nr)
 
        mutex_lock(&data->update_lock);
        if (val) {
-               data->fan_min[nr] = 
+               data->fan_min[nr] =
                        FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr]));
        } else {
                data->fan_min[nr] = 0xff;
@@ -535,12 +536,12 @@ set_fan_div(struct device *dev, const char *buf, size_t count, int nr)
 
        tmp = val == 8 ? 0xc0 :
              val == 4 ? 0x80 :
-             val == 2 ? 0x40 : 
-             val == 1 ? 0x00 :  
+             val == 2 ? 0x40 :
+             val == 1 ? 0x00 :
              0xff;
        if (tmp == 0xff)
                return -EINVAL;
-       
+
        mutex_lock(&data->update_lock);
        /* Get fresh readings */
        data->fan_div[nr] = adm1031_read_value(client,
@@ -550,14 +551,13 @@ set_fan_div(struct device *dev, const char *buf, size_t count, int nr)
 
        /* Write the new clock divider and fan min */
        old_div = FAN_DIV_FROM_REG(data->fan_div[nr]);
-       data->fan_div[nr] = (tmp & 0xC0) | (0x3f & data->fan_div[nr]);
-       new_min = data->fan_min[nr] * old_div / 
-               FAN_DIV_FROM_REG(data->fan_div[nr]);
+       data->fan_div[nr] = tmp | (0x3f & data->fan_div[nr]);
+       new_min = data->fan_min[nr] * old_div / val;
        data->fan_min[nr] = new_min > 0xff ? 0xff : new_min;
 
-       adm1031_write_value(client, ADM1031_REG_FAN_DIV(nr), 
+       adm1031_write_value(client, ADM1031_REG_FAN_DIV(nr),
                            data->fan_div[nr]);
-       adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), 
+       adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr),
                            data->fan_min[nr]);
 
        /* Invalidate the cache: fan speed is no longer valid */
@@ -796,7 +796,7 @@ static const struct attribute_group adm1031_group_opt = {
 /* This function is called by i2c_probe */
 static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
 {
-       struct i2c_client *new_client;
+       struct i2c_client *client;
        struct adm1031_data *data;
        int err = 0;
        const char *name = "";
@@ -809,17 +809,16 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
                goto exit;
        }
 
-       new_client = &data->client;
-       i2c_set_clientdata(new_client, data);
-       new_client->addr = address;
-       new_client->adapter = adapter;
-       new_client->driver = &adm1031_driver;
-       new_client->flags = 0;
+       client = &data->client;
+       i2c_set_clientdata(client, data);
+       client->addr = address;
+       client->adapter = adapter;
+       client->driver = &adm1031_driver;
 
        if (kind < 0) {
                int id, co;
-               id = i2c_smbus_read_byte_data(new_client, 0x3d);
-               co = i2c_smbus_read_byte_data(new_client, 0x3e);
+               id = i2c_smbus_read_byte_data(client, 0x3d);
+               co = i2c_smbus_read_byte_data(client, 0x3e);
 
                if (!((id == 0x31 || id == 0x30) && co == 0x41))
                        goto exit_free;
@@ -840,28 +839,27 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
        }
        data->chip_type = kind;
 
-       strlcpy(new_client->name, name, I2C_NAME_SIZE);
-       data->valid = 0;
+       strlcpy(client->name, name, I2C_NAME_SIZE);
        mutex_init(&data->update_lock);
 
        /* Tell the I2C layer a new client has arrived */
-       if ((err = i2c_attach_client(new_client)))
+       if ((err = i2c_attach_client(client)))
                goto exit_free;
 
        /* Initialize the ADM1031 chip */
-       adm1031_init_client(new_client);
+       adm1031_init_client(client);
 
        /* Register sysfs hooks */
-       if ((err = sysfs_create_group(&new_client->dev.kobj, &adm1031_group)))
+       if ((err = sysfs_create_group(&client->dev.kobj, &adm1031_group)))
                goto exit_detach;
 
        if (kind == adm1031) {
-               if ((err = sysfs_create_group(&new_client->dev.kobj,
+               if ((err = sysfs_create_group(&client->dev.kobj,
                                                &adm1031_group_opt)))
                        goto exit_remove;
        }
 
-       data->hwmon_dev = hwmon_device_register(&new_client->dev);
+       data->hwmon_dev = hwmon_device_register(&client->dev);
        if (IS_ERR(data->hwmon_dev)) {
                err = PTR_ERR(data->hwmon_dev);
                goto exit_remove;
@@ -870,10 +868,10 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind)
        return 0;
 
 exit_remove:
-       sysfs_remove_group(&new_client->dev.kobj, &adm1031_group);
-       sysfs_remove_group(&new_client->dev.kobj, &adm1031_group_opt);
+       sysfs_remove_group(&client->dev.kobj, &adm1031_group);
+       sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt);
 exit_detach:
-       i2c_detach_client(new_client);
+       i2c_detach_client(client);
 exit_free:
        kfree(data);
 exit:
@@ -905,7 +903,7 @@ static void adm1031_init_client(struct i2c_client *client)
        if (data->chip_type == adm1031) {
                mask |= (ADM1031_CONF2_PWM2_ENABLE |
                        ADM1031_CONF2_TACH2_ENABLE);
-       } 
+       }
        /* Initialize the ADM1031 chip (enables fan speed reading ) */
        read_val = adm1031_read_value(client, ADM1031_REG_CONF2);
        if ((read_val | mask) != read_val) {
@@ -984,7 +982,7 @@ static struct adm1031_data *adm1031_update_device(struct device *dev)
                if (data->chip_type == adm1030) {
                        data->alarm &= 0xc0ff;
                }
-               
+
                for (chan=0; chan<(data->chip_type == adm1030 ? 1 : 2); chan++) {
                        data->fan_div[chan] =
                            adm1031_read_value(client, ADM1031_REG_FAN_DIV(chan));
@@ -993,7 +991,7 @@ static struct adm1031_data *adm1031_update_device(struct device *dev)
                        data->fan[chan] =
                            adm1031_read_value(client, ADM1031_REG_FAN_SPEED(chan));
                        data->pwm[chan] =
-                           0xf & (adm1031_read_value(client, ADM1031_REG_PWM) >> 
+                           0xf & (adm1031_read_value(client, ADM1031_REG_PWM) >>
                                   (4*chan));
                }
                data->last_updated = jiffies;