alim15x3: disable init_hwif_ali15x3 for PowerPC

We don't need init_hwif_ali15x3() on the PowerPC systems either.

Before:

ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at  PCI slot 0001:03:1f.0
ALI15X3: 100% native mode on irq 19
    ide0: BM-DMA at 0x1120-0x1127
    ide1: BM-DMA at 0x1128-0x112f
hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
hda: UDMA/66 mode selected
ide0: Disabled unable to get IRQ 14.
ide0: failed to initialize IDE interface
ide1: Disabled unable to get IRQ 15.
ide1: failed to initialize IDE interface

After:

ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at  PCI slot 0001:03:1f.0
ALI15X3: 100% native mode on irq 19
    ide0: BM-DMA at 0x1120-0x1127
    ide1: BM-DMA at 0x1128-0x112f
hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
hda: UDMA/66 mode selected
ide0 at 0x1100-0x1107,0x110a on irq 19
ide1 at 0x1110-0x1117,0x111a on irq 19
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache

ide0 works well, though I can't test ide1, it isn't traced out on
the board.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index b36a22b8c213807a1966595eafc68adf463a75ba..c1922f9cfe80606e82a1ca2f38ae12e42877fc18 100644 (file)
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -412,14 +412,14 @@ static u8 __devinit ali_cable_detect(ide_hwif_t *hwif)
        return cbl;
 }
 
-#ifndef CONFIG_SPARC64
+#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC)
 /**
  *     init_hwif_ali15x3       -       Initialize the ALI IDE x86 stuff
  *     @hwif: interface to configure
  *
  *     Obtain the IRQ tables for an ALi based IDE solution on the PC
  *     class platforms. This part of the code isn't applicable to the
- *     Sparc systems
+ *     Sparc and PowerPC systems.
  */
 
 static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
@@ -463,7 +463,9 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
                        hwif->irq = irq;
        }
 }
-#endif
+#else
+#define init_hwif_ali15x3 NULL
+#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */
 
 /**
  *     init_dma_ali15x3        -       set up DMA on ALi15x3
@@ -517,9 +519,7 @@ static const struct ide_dma_ops ali_dma_ops = {
 static const struct ide_port_info ali15x3_chipset __devinitdata = {
        .name           = "ALI15X3",
        .init_chipset   = init_chipset_ali15x3,
-#ifndef CONFIG_SPARC64
        .init_hwif      = init_hwif_ali15x3,
-#endif
        .init_dma       = init_dma_ali15x3,
        .port_ops       = &ali_port_ops,
        .pio_mask       = ATA_PIO5,