]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
PM: Reduce code duplication between main.c and user.c
authorRafael J. Wysocki <rjw@sisk.pl>
Thu, 19 Jul 2007 08:47:38 +0000 (01:47 -0700)
committerLinus Torvalds <torvalds@woody.linux-foundation.org>
Thu, 19 Jul 2007 17:04:42 +0000 (10:04 -0700)
The SNAPSHOT_S2RAM ioctl code is outdated and it should not duplicate the
suspend code in kernel/power/main.c.  Fix that.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kernel/power/main.c
kernel/power/power.h
kernel/power/user.c

index 4d26ad394fb3bbeab4787013f173fa5aaa153ee7..32147b57c3bfb419f0950b7abafe88aa207984a5 100644 (file)
@@ -65,14 +65,11 @@ static inline void pm_finish(suspend_state_t state)
 
 /**
  *     suspend_prepare - Do prep work before entering low-power state.
- *     @state:         State we're entering.
  *
- *     This is common code that is called for each state that we're 
- *     entering. Allocate a console, stop all processes, then make sure
- *     the platform can enter the requested state.
+ *     This is common code that is called for each state that we're entering.
+ *     Run suspend notifiers, allocate a console and stop all processes.
  */
-
-static int suspend_prepare(suspend_state_t state)
+static int suspend_prepare(void)
 {
        int error;
        unsigned int free_pages;
@@ -91,43 +88,18 @@ static int suspend_prepare(suspend_state_t state)
                goto Thaw;
        }
 
-       if ((free_pages = global_page_state(NR_FREE_PAGES))
-                       < FREE_PAGE_NUMBER) {
+       free_pages = global_page_state(NR_FREE_PAGES);
+       if (free_pages < FREE_PAGE_NUMBER) {
                pr_debug("PM: free some memory\n");
                shrink_all_memory(FREE_PAGE_NUMBER - free_pages);
                if (nr_free_pages() < FREE_PAGE_NUMBER) {
                        error = -ENOMEM;
                        printk(KERN_ERR "PM: No enough memory\n");
-                       goto Thaw;
                }
        }
-
-       if (pm_ops->set_target) {
-               error = pm_ops->set_target(state);
-               if (error)
-                       goto Thaw;
-       }
-       suspend_console();
-       error = device_suspend(PMSG_SUSPEND);
-       if (error) {
-               printk(KERN_ERR "Some devices failed to suspend\n");
-               goto Resume_console;
-       }
-       if (pm_ops->prepare) {
-               if ((error = pm_ops->prepare(state)))
-                       goto Resume_devices;
-       }
-
-       error = disable_nonboot_cpus();
        if (!error)
                return 0;
 
-       enable_nonboot_cpus();
-       pm_finish(state);
- Resume_devices:
-       device_resume();
- Resume_console:
-       resume_console();
  Thaw:
        thaw_processes();
        pm_restore_console();
@@ -148,6 +120,12 @@ void __attribute__ ((weak)) arch_suspend_enable_irqs(void)
        local_irq_enable();
 }
 
+/**
+ *     suspend_enter - enter the desired system sleep state.
+ *     @state:         state to enter
+ *
+ *     This function should be called after devices have been suspended.
+ */
 int suspend_enter(suspend_state_t state)
 {
        int error = 0;
@@ -167,21 +145,55 @@ int suspend_enter(suspend_state_t state)
        return error;
 }
 
+/**
+ *     suspend_devices_and_enter - suspend devices and enter the desired system sleep
+ *                       state.
+ *     @state:           state to enter
+ */
+int suspend_devices_and_enter(suspend_state_t state)
+{
+       int error;
+
+       if (!pm_ops)
+               return -ENOSYS;
+
+       if (pm_ops->set_target) {
+               error = pm_ops->set_target(state);
+               if (error)
+                       return error;
+       }
+       suspend_console();
+       error = device_suspend(PMSG_SUSPEND);
+       if (error) {
+               printk(KERN_ERR "Some devices failed to suspend\n");
+               goto Resume_console;
+       }
+       if (pm_ops->prepare) {
+               error = pm_ops->prepare(state);
+               if (error)
+                       goto Resume_devices;
+       }
+       error = disable_nonboot_cpus();
+       if (!error)
+               suspend_enter(state);
+
+       enable_nonboot_cpus();
+       pm_finish(state);
+ Resume_devices:
+       device_resume();
+ Resume_console:
+       resume_console();
+       return error;
+}
 
 /**
  *     suspend_finish - Do final work before exiting suspend sequence.
- *     @state:         State we're coming out of.
  *
  *     Call platform code to clean up, restart processes, and free the 
  *     console that we've allocated. This is not called for suspend-to-disk.
  */
-
-static void suspend_finish(suspend_state_t state)
+static void suspend_finish(void)
 {
-       enable_nonboot_cpus();
-       pm_finish(state);
-       device_resume();
-       resume_console();
        thaw_processes();
        pm_restore_console();
        pm_notifier_call_chain(PM_POST_SUSPEND);
@@ -216,7 +228,6 @@ static inline int valid_state(suspend_state_t state)
  *     Then, do the setup for suspend, enter the state, and cleaup (after
  *     we've woken up).
  */
-
 static int enter_state(suspend_state_t state)
 {
        int error;
@@ -227,14 +238,14 @@ static int enter_state(suspend_state_t state)
                return -EBUSY;
 
        pr_debug("PM: Preparing system for %s sleep\n", pm_states[state]);
-       if ((error = suspend_prepare(state)))
+       if ((error = suspend_prepare()))
                goto Unlock;
 
        pr_debug("PM: Entering %s sleep\n", pm_states[state]);
-       error = suspend_enter(state);
+       error = suspend_devices_and_enter(state);
 
        pr_debug("PM: Finishing wakeup.\n");
-       suspend_finish(state);
+       suspend_finish();
  Unlock:
        mutex_unlock(&pm_mutex);
        return error;
index 01c2275b15b2556353fc00f091c2962e88f0a1a4..5f24c786f8ec9bacd0421e95d4113c603a823fd5 100644 (file)
@@ -170,7 +170,6 @@ extern int swsusp_resume(void);
 extern int swsusp_read(unsigned int *flags_p);
 extern int swsusp_write(unsigned int flags);
 extern void swsusp_close(void);
-extern int suspend_enter(suspend_state_t state);
 
 struct timeval;
 /* kernel/power/swsusp.c */
@@ -178,6 +177,8 @@ extern void swsusp_show_speed(struct timeval *, struct timeval *,
                                unsigned int, char *);
 
 /* kernel/power/main.c */
+extern int suspend_enter(suspend_state_t state);
+extern int suspend_devices_and_enter(suspend_state_t state);
 extern struct blocking_notifier_head pm_chain_head;
 
 static inline int pm_notifier_call_chain(unsigned long val)
index 7f19afe01b48b332013fbc1757638829af6633e9..bd0723a7df3f99cf811834f9cc1d107202d46947 100644 (file)
@@ -255,47 +255,19 @@ static int snapshot_ioctl(struct inode *inode, struct file *filp,
                break;
 
        case SNAPSHOT_S2RAM:
-               if (!pm_ops) {
-                       error = -ENOSYS;
-                       break;
-               }
-
                if (!data->frozen) {
                        error = -EPERM;
                        break;
                }
-
                if (!mutex_trylock(&pm_mutex)) {
                        error = -EBUSY;
                        break;
                }
-
-               if (pm_ops->prepare) {
-                       error = pm_ops->prepare(PM_SUSPEND_MEM);
-                       if (error)
-                               goto OutS3;
-               }
-
-               /* Put devices to sleep */
-               suspend_console();
-               error = device_suspend(PMSG_SUSPEND);
-               if (error) {
-                       printk(KERN_ERR "Failed to suspend some devices.\n");
-               } else {
-                       error = disable_nonboot_cpus();
-                       if (!error) {
-                               /* Enter S3, system is already frozen */
-                               suspend_enter(PM_SUSPEND_MEM);
-                               enable_nonboot_cpus();
-                       }
-                       /* Wake up devices */
-                       device_resume();
-               }
-               resume_console();
-               if (pm_ops->finish)
-                       pm_ops->finish(PM_SUSPEND_MEM);
-
- OutS3:
+               /*
+                * Tasks are frozen and the notifiers have been called with
+                * PM_HIBERNATION_PREPARE
+                */
+               error = suspend_devices_and_enter(PM_SUSPEND_MEM);
                mutex_unlock(&pm_mutex);
                break;