]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
IDE: Make taskfile interface more robust wrt unexpected end-of-command
authorLinus Torvalds <torvalds@linux-foundation.org>
Wed, 19 Mar 2008 04:26:24 +0000 (21:26 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Wed, 19 Mar 2008 04:26:24 +0000 (21:26 -0700)
Now that we handle all the special commands using REQ_TYPE_ATA_TASKFILE
rather than using the old REQ_TYPE_ATA_CMD model, we need to also
emulate the lack of full taskfile data that comes with the old command
model (ie when commands are generated with the HDIO_DRIVE_CMD ioctl
rather than using the HDIO_DRIVE_TASK[FILE] ioctls).

In particular, this means that we should handle command completion the
more relaxed way that the old drive_cmd_intr() code did.  It allows
commands to finish early even if they don't use up all the data that we
thought we had for them.

This fixes a regression seen by Anders Eriksson where some SMART
commands sent by smartd would cause a boot-time system hang on his
machine because the IDE command handling code didn't realize that the
command had completed.

Tested-by: Anders Eriksson <aeriksson@fastmail.fm>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/ide/ide-taskfile.c

index 0518a2e948cf46f9317f8ef27e4a4121c6df08ae..4c86a8d84b4ccd02d8567b6b00f51429e5f9c82a 100644 (file)
@@ -422,6 +422,25 @@ void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat)
                ide_end_request(drive, 1, rq->nr_sectors);
 }
 
+/*
+ * We got an interrupt on a task_in case, but no errors and no DRQ.
+ *
+ * It might be a spurious irq (shared irq), but it might be a
+ * command that had no output.
+ */
+static ide_startstop_t task_in_unexpected(ide_drive_t *drive, struct request *rq, u8 stat)
+{
+       /* Command all done? */
+       if (OK_STAT(stat, READY_STAT, BUSY_STAT)) {
+               task_end_request(drive, rq, stat);
+               return ide_stopped;
+       }
+
+       /* Assume it was a spurious irq */
+       ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL);
+       return ide_started;
+}
+
 /*
  * Handler for command with PIO data-in phase (Read/Read Multiple).
  */
@@ -431,18 +450,17 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive)
        struct request *rq = HWGROUP(drive)->rq;
        u8 stat = ide_read_status(drive);
 
-       /* new way for dealing with premature shared PCI interrupts */
-       if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) {
-               if (stat & (ERR_STAT | DRQ_STAT))
-                       return task_error(drive, rq, __FUNCTION__, stat);
-               /* No data yet, so wait for another IRQ. */
-               ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL);
-               return ide_started;
-       }
+       /* Error? */
+       if (stat & ERR_STAT)
+               return task_error(drive, rq, __FUNCTION__, stat);
+
+       /* Didn't want any data? Odd. */
+       if (!(stat & DRQ_STAT))
+               return task_in_unexpected(drive, rq, stat);
 
        ide_pio_datablock(drive, rq, 0);
 
-       /* If it was the last datablock check status and finish transfer. */
+       /* Are we done? Check status and finish transfer. */
        if (!hwif->nleft) {
                stat = wait_drive_not_busy(drive);
                if (!OK_STAT(stat, 0, BAD_STAT))