]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
V4L/DVB (9958): tvp5150: convert to v4l2_subdev.
authorHans Verkuil <hverkuil@xs4all.nl>
Thu, 18 Dec 2008 14:17:25 +0000 (11:17 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Tue, 30 Dec 2008 11:39:28 +0000 (09:39 -0200)
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/tvp5150.c

index e8f701a412ab051479cc4decdd1ac21a72837c3f..e8a4637350ecec6bbd71712a94491a36792e8558 100644 (file)
@@ -9,8 +9,9 @@
 #include <linux/videodev2.h>
 #include <linux/delay.h>
 #include <linux/video_decoder.h>
-#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
 #include <media/tvp5150.h>
+#include <media/v4l2-i2c-drv-legacy.h>
 
 #include "tvp5150_reg.h"
 
@@ -29,21 +30,7 @@ I2C_CLIENT_INSMOD;
 
 static int debug;
 module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-#define tvp5150_err(fmt, arg...) do { \
-       printk(KERN_ERR "%s %d-%04x: " fmt, c->driver->driver.name, \
-              i2c_adapter_id(c->adapter), c->addr , ## arg); } while (0)
-#define tvp5150_info(fmt, arg...) do { \
-       printk(KERN_INFO "%s %d-%04x: " fmt, c->driver->driver.name, \
-              i2c_adapter_id(c->adapter), c->addr , ## arg); } while (0)
-#define tvp5150_dbg(num, fmt, arg...) \
-       do { \
-               if (debug >= num) \
-                       printk(KERN_DEBUG "%s debug %d-%04x: " fmt,\
-                               c->driver->driver.name, \
-                               i2c_adapter_id(c->adapter), \
-                               c->addr , ## arg); } while (0)
+MODULE_PARM_DESC(debug, "Debug level (0-2)");
 
 /* supported controls */
 static struct v4l2_queryctrl tvp5150_qctrl[] = {
@@ -87,7 +74,7 @@ static struct v4l2_queryctrl tvp5150_qctrl[] = {
 };
 
 struct tvp5150 {
-       struct i2c_client *client;
+       struct v4l2_subdev sd;
 
        v4l2_std_id norm;       /* Current set standard */
        struct v4l2_routing route;
@@ -98,49 +85,57 @@ struct tvp5150 {
        int sat;
 };
 
-static int tvp5150_read(struct i2c_client *c, unsigned char addr)
+static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
 {
+       return container_of(sd, struct tvp5150, sd);
+}
+
+static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
+{
+       struct i2c_client *c = v4l2_get_subdevdata(sd);
        unsigned char buffer[1];
        int rc;
 
        buffer[0] = addr;
        if (1 != (rc = i2c_master_send(c, buffer, 1)))
-               tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 1)\n", rc);
+               v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
 
        msleep(10);
 
        if (1 != (rc = i2c_master_recv(c, buffer, 1)))
-               tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 1)\n", rc);
+               v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
 
-       tvp5150_dbg(2, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]);
+       v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]);
 
        return (buffer[0]);
 }
 
-static inline void tvp5150_write(struct i2c_client *c, unsigned char addr,
+static inline void tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
                                 unsigned char value)
 {
+       struct i2c_client *c = v4l2_get_subdevdata(sd);
        unsigned char buffer[2];
        int rc;
 
        buffer[0] = addr;
        buffer[1] = value;
-       tvp5150_dbg(2, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
+       v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
        if (2 != (rc = i2c_master_send(c, buffer, 2)))
-               tvp5150_dbg(0, "i2c i/o error: rc == %d (should be 2)\n", rc);
+               v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 2)\n", rc);
 }
 
-static void dump_reg_range(struct i2c_client *c, char *s, u8 init, const u8 end,int max_line)
+static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
+                               const u8 end, int max_line)
 {
-       int i=0;
+       int i = 0;
 
-       while (init!=(u8)(end+1)) {
-               if ((i%max_line) == 0) {
-                       if (i>0)
+       while (init != (u8)(end + 1)) {
+               if ((i % max_line) == 0) {
+                       if (i > 0)
                                printk("\n");
-                       printk("tvp5150: %s reg 0x%02x = ",s,init);
+                       printk("tvp5150: %s reg 0x%02x = ", s, init);
                }
-               printk("%02x ",tvp5150_read(c, init));
+               printk("%02x ", tvp5150_read(sd, init));
 
                init++;
                i++;
@@ -148,147 +143,148 @@ static void dump_reg_range(struct i2c_client *c, char *s, u8 init, const u8 end,
        printk("\n");
 }
 
-static void dump_reg(struct i2c_client *c)
+static int tvp5150_log_status(struct v4l2_subdev *sd)
 {
        printk("tvp5150: Video input source selection #1 = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_VD_IN_SRC_SEL_1));
+                       tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
        printk("tvp5150: Analog channel controls = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_ANAL_CHL_CTL));
+                       tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
        printk("tvp5150: Operation mode controls = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_OP_MODE_CTL));
+                       tvp5150_read(sd, TVP5150_OP_MODE_CTL));
        printk("tvp5150: Miscellaneous controls = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_MISC_CTL));
+                       tvp5150_read(sd, TVP5150_MISC_CTL));
        printk("tvp5150: Autoswitch mask= 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_AUTOSW_MSK));
+                       tvp5150_read(sd, TVP5150_AUTOSW_MSK));
        printk("tvp5150: Color killer threshold control = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_COLOR_KIL_THSH_CTL));
+                       tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
        printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
-                                       tvp5150_read(c, TVP5150_LUMA_PROC_CTL_1),
-                                       tvp5150_read(c, TVP5150_LUMA_PROC_CTL_2),
-                                       tvp5150_read(c, TVP5150_LUMA_PROC_CTL_3));
+                       tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
+                       tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
+                       tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
        printk("tvp5150: Brightness control = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_BRIGHT_CTL));
+                       tvp5150_read(sd, TVP5150_BRIGHT_CTL));
        printk("tvp5150: Color saturation control = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_SATURATION_CTL));
+                       tvp5150_read(sd, TVP5150_SATURATION_CTL));
        printk("tvp5150: Hue control = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_HUE_CTL));
+                       tvp5150_read(sd, TVP5150_HUE_CTL));
        printk("tvp5150: Contrast control = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_CONTRAST_CTL));
+                       tvp5150_read(sd, TVP5150_CONTRAST_CTL));
        printk("tvp5150: Outputs and data rates select = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_DATA_RATE_SEL));
+                       tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
        printk("tvp5150: Configuration shared pins = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_CONF_SHARED_PIN));
+                       tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
        printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
-                                       tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_MSB),
-                                       tvp5150_read(c, TVP5150_ACT_VD_CROP_ST_LSB));
+                       tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
+                       tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
        printk("tvp5150: Active video cropping stop  = 0x%02x%02x\n",
-                                       tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_MSB),
-                                       tvp5150_read(c, TVP5150_ACT_VD_CROP_STP_LSB));
+                       tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
+                       tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
        printk("tvp5150: Genlock/RTC = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_GENLOCK));
+                       tvp5150_read(sd, TVP5150_GENLOCK));
        printk("tvp5150: Horizontal sync start = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_HORIZ_SYNC_START));
+                       tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
        printk("tvp5150: Vertical blanking start = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_VERT_BLANKING_START));
+                       tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
        printk("tvp5150: Vertical blanking stop = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_VERT_BLANKING_STOP));
+                       tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
        printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
-                                       tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_1),
-                                       tvp5150_read(c, TVP5150_CHROMA_PROC_CTL_2));
+                       tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
+                       tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
        printk("tvp5150: Interrupt reset register B = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_INT_RESET_REG_B));
+                       tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
        printk("tvp5150: Interrupt enable register B = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_INT_ENABLE_REG_B));
+                       tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
        printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_INTT_CONFIG_REG_B));
+                       tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
        printk("tvp5150: Video standard = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_VIDEO_STD));
+                       tvp5150_read(sd, TVP5150_VIDEO_STD));
        printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
-                                       tvp5150_read(c, TVP5150_CB_GAIN_FACT),
-                                       tvp5150_read(c, TVP5150_CR_GAIN_FACTOR));
+                       tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
+                       tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
        printk("tvp5150: Macrovision on counter = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_MACROVISION_ON_CTR));
+                       tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
        printk("tvp5150: Macrovision off counter = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_MACROVISION_OFF_CTR));
+                       tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
        printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
-                                       (tvp5150_read(c, TVP5150_REV_SELECT)&1)?3:4);
+                       (tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
        printk("tvp5150: Device ID = %02x%02x\n",
-                                       tvp5150_read(c, TVP5150_MSB_DEV_ID),
-                                       tvp5150_read(c, TVP5150_LSB_DEV_ID));
+                       tvp5150_read(sd, TVP5150_MSB_DEV_ID),
+                       tvp5150_read(sd, TVP5150_LSB_DEV_ID));
        printk("tvp5150: ROM version = (hex) %02x.%02x\n",
-                                       tvp5150_read(c, TVP5150_ROM_MAJOR_VER),
-                                       tvp5150_read(c, TVP5150_ROM_MINOR_VER));
+                       tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
+                       tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
        printk("tvp5150: Vertical line count = 0x%02x%02x\n",
-                                       tvp5150_read(c, TVP5150_VERT_LN_COUNT_MSB),
-                                       tvp5150_read(c, TVP5150_VERT_LN_COUNT_LSB));
+                       tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
+                       tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
        printk("tvp5150: Interrupt status register B = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_INT_STATUS_REG_B));
+                       tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
        printk("tvp5150: Interrupt active register B = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_INT_ACTIVE_REG_B));
+                       tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
        printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
-                                       tvp5150_read(c, TVP5150_STATUS_REG_1),
-                                       tvp5150_read(c, TVP5150_STATUS_REG_2),
-                                       tvp5150_read(c, TVP5150_STATUS_REG_3),
-                                       tvp5150_read(c, TVP5150_STATUS_REG_4),
-                                       tvp5150_read(c, TVP5150_STATUS_REG_5));
+                       tvp5150_read(sd, TVP5150_STATUS_REG_1),
+                       tvp5150_read(sd, TVP5150_STATUS_REG_2),
+                       tvp5150_read(sd, TVP5150_STATUS_REG_3),
+                       tvp5150_read(sd, TVP5150_STATUS_REG_4),
+                       tvp5150_read(sd, TVP5150_STATUS_REG_5));
 
-       dump_reg_range(c,"Teletext filter 1",   TVP5150_TELETEXT_FIL1_INI,
-                                               TVP5150_TELETEXT_FIL1_END,8);
-       dump_reg_range(c,"Teletext filter 2",   TVP5150_TELETEXT_FIL2_INI,
-                                               TVP5150_TELETEXT_FIL2_END,8);
+       dump_reg_range(sd, "Teletext filter 1",   TVP5150_TELETEXT_FIL1_INI,
+                       TVP5150_TELETEXT_FIL1_END, 8);
+       dump_reg_range(sd, "Teletext filter 2",   TVP5150_TELETEXT_FIL2_INI,
+                       TVP5150_TELETEXT_FIL2_END, 8);
 
        printk("tvp5150: Teletext filter enable = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_TELETEXT_FIL_ENA));
+                       tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
        printk("tvp5150: Interrupt status register A = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_INT_STATUS_REG_A));
+                       tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
        printk("tvp5150: Interrupt enable register A = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_INT_ENABLE_REG_A));
+                       tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
        printk("tvp5150: Interrupt configuration = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_INT_CONF));
+                       tvp5150_read(sd, TVP5150_INT_CONF));
        printk("tvp5150: VDP status register = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_VDP_STATUS_REG));
+                       tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
        printk("tvp5150: FIFO word count = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_FIFO_WORD_COUNT));
+                       tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
        printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_FIFO_INT_THRESHOLD));
+                       tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
        printk("tvp5150: FIFO reset = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_FIFO_RESET));
+                       tvp5150_read(sd, TVP5150_FIFO_RESET));
        printk("tvp5150: Line number interrupt = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_LINE_NUMBER_INT));
+                       tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
        printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
-                                       tvp5150_read(c, TVP5150_PIX_ALIGN_REG_HIGH),
-                                       tvp5150_read(c, TVP5150_PIX_ALIGN_REG_LOW));
+                       tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
+                       tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
        printk("tvp5150: FIFO output control = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_FIFO_OUT_CTRL));
+                       tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
        printk("tvp5150: Full field enable = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_FULL_FIELD_ENA));
+                       tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
        printk("tvp5150: Full field mode register = 0x%02x\n",
-                                       tvp5150_read(c, TVP5150_FULL_FIELD_MODE_REG));
+                       tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
 
-       dump_reg_range(c,"CC   data",   TVP5150_CC_DATA_INI,
-                                       TVP5150_CC_DATA_END,8);
+       dump_reg_range(sd, "CC   data",   TVP5150_CC_DATA_INI,
+                       TVP5150_CC_DATA_END, 8);
 
-       dump_reg_range(c,"WSS  data",   TVP5150_WSS_DATA_INI,
-                                       TVP5150_WSS_DATA_END,8);
+       dump_reg_range(sd, "WSS  data",   TVP5150_WSS_DATA_INI,
+                       TVP5150_WSS_DATA_END, 8);
 
-       dump_reg_range(c,"VPS  data",   TVP5150_VPS_DATA_INI,
-                                       TVP5150_VPS_DATA_END,8);
+       dump_reg_range(sd, "VPS  data",   TVP5150_VPS_DATA_INI,
+                       TVP5150_VPS_DATA_END, 8);
 
-       dump_reg_range(c,"VITC data",   TVP5150_VITC_DATA_INI,
-                                       TVP5150_VITC_DATA_END,10);
+       dump_reg_range(sd, "VITC data",   TVP5150_VITC_DATA_INI,
+                       TVP5150_VITC_DATA_END, 10);
 
-       dump_reg_range(c,"Line mode",   TVP5150_LINE_MODE_INI,
-                                       TVP5150_LINE_MODE_END,8);
+       dump_reg_range(sd, "Line mode",   TVP5150_LINE_MODE_INI,
+                       TVP5150_LINE_MODE_END, 8);
+       return 0;
 }
 
 /****************************************************************************
                        Basic functions
  ****************************************************************************/
 
-static inline void tvp5150_selmux(struct i2c_client *c)
+static inline void tvp5150_selmux(struct v4l2_subdev *sd)
 {
        int opmode=0;
-       struct tvp5150 *decoder = i2c_get_clientdata(c);
+       struct tvp5150 *decoder = to_tvp5150(sd);
        int input = 0;
        unsigned char val;
 
@@ -309,23 +305,23 @@ static inline void tvp5150_selmux(struct i2c_client *c)
                break;
        }
 
-       tvp5150_dbg( 1, "Selecting video route: route input=%i, output=%i "
+       v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
                        "=> tvp5150 input=%i, opmode=%i\n",
                        decoder->route.input,decoder->route.output,
                        input, opmode );
 
-       tvp5150_write(c, TVP5150_OP_MODE_CTL, opmode);
-       tvp5150_write(c, TVP5150_VD_IN_SRC_SEL_1, input);
+       tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
+       tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
 
        /* Svideo should enable YCrCb output and disable GPCL output
         * For Composite and TV, it should be the reverse
         */
-       val = tvp5150_read(c, TVP5150_MISC_CTL);
+       val = tvp5150_read(sd, TVP5150_MISC_CTL);
        if (decoder->route.input == TVP5150_SVIDEO)
                val = (val & ~0x40) | 0x10;
        else
                val = (val & ~0x10) | 0x40;
-       tvp5150_write(c, TVP5150_MISC_CTL, val);
+       tvp5150_write(sd, TVP5150_MISC_CTL, val);
 };
 
 struct i2c_reg_value {
@@ -593,35 +589,35 @@ static struct i2c_vbi_ram_value vbi_ram_default[] =
        { (u16)-1 }
 };
 
-static int tvp5150_write_inittab(struct i2c_client *c,
+static int tvp5150_write_inittab(struct v4l2_subdev *sd,
                                const struct i2c_reg_value *regs)
 {
        while (regs->reg != 0xff) {
-               tvp5150_write(c, regs->reg, regs->value);
+               tvp5150_write(sd, regs->reg, regs->value);
                regs++;
        }
        return 0;
 }
 
-static int tvp5150_vdp_init(struct i2c_client *c,
+static int tvp5150_vdp_init(struct v4l2_subdev *sd,
                                const struct i2c_vbi_ram_value *regs)
 {
        unsigned int i;
 
        /* Disable Full Field */
-       tvp5150_write(c, TVP5150_FULL_FIELD_ENA, 0);
+       tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
 
        /* Before programming, Line mode should be at 0xff */
-       for (i=TVP5150_LINE_MODE_INI; i<=TVP5150_LINE_MODE_END; i++)
-               tvp5150_write(c, i, 0xff);
+       for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
+               tvp5150_write(sd, i, 0xff);
 
        /* Load Ram Table */
-       while (regs->reg != (u16)-1 ) {
-               tvp5150_write(c, TVP5150_CONF_RAM_ADDR_HIGH,regs->reg>>8);
-               tvp5150_write(c, TVP5150_CONF_RAM_ADDR_LOW,regs->reg);
+       while (regs->reg != (u16)-1) {
+               tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
+               tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
 
-               for (i=0;i<16;i++)
-                       tvp5150_write(c, TVP5150_VDP_CONF_RAM_DATA,regs->values[i]);
+               for (i = 0; i < 16; i++)
+                       tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
 
                regs++;
        }
@@ -629,11 +625,13 @@ static int tvp5150_vdp_init(struct i2c_client *c,
 }
 
 /* Fills VBI capabilities based on i2c_vbi_ram_value struct */
-static void tvp5150_vbi_get_cap(const struct i2c_vbi_ram_value *regs,
+static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
                                struct v4l2_sliced_vbi_cap *cap)
 {
+       const struct i2c_vbi_ram_value *regs = vbi_ram_default;
        int line;
 
+       v4l2_dbg(1, debug, sd, "VIDIOC_G_SLICED_VBI_CAP\n");
        memset(cap, 0, sizeof *cap);
 
        while (regs->reg != (u16)-1 ) {
@@ -644,6 +642,7 @@ static void tvp5150_vbi_get_cap(const struct i2c_vbi_ram_value *regs,
 
                regs++;
        }
+       return 0;
 }
 
 /* Set vbi processing
@@ -659,18 +658,18 @@ static void tvp5150_vbi_get_cap(const struct i2c_vbi_ram_value *regs,
  *     LSB = field1
  *     MSB = field2
  */
-static int tvp5150_set_vbi(struct i2c_client *c,
+static int tvp5150_set_vbi(struct v4l2_subdev *sd,
                        const struct i2c_vbi_ram_value *regs,
                        unsigned int type,u8 flags, int line,
                        const int fields)
 {
-       struct tvp5150 *decoder = i2c_get_clientdata(c);
-       v4l2_std_id std=decoder->norm;
+       struct tvp5150 *decoder = to_tvp5150(sd);
+       v4l2_std_id std = decoder->norm;
        u8 reg;
        int pos=0;
 
        if (std == V4L2_STD_ALL) {
-               tvp5150_err("VBI can't be configured without knowing number of lines\n");
+               v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
                return 0;
        } else if (std & V4L2_STD_625_50) {
                /* Don't follow NTSC Line number convension */
@@ -698,163 +697,186 @@ static int tvp5150_set_vbi(struct i2c_client *c,
        reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
 
        if (fields&1) {
-               tvp5150_write(c, reg, type);
+               tvp5150_write(sd, reg, type);
        }
 
        if (fields&2) {
-               tvp5150_write(c, reg+1, type);
+               tvp5150_write(sd, reg+1, type);
        }
 
        return type;
 }
 
-static int tvp5150_get_vbi(struct i2c_client *c,
+static int tvp5150_get_vbi(struct v4l2_subdev *sd,
                        const struct i2c_vbi_ram_value *regs, int line)
 {
-       struct tvp5150 *decoder = i2c_get_clientdata(c);
-       v4l2_std_id std=decoder->norm;
+       struct tvp5150 *decoder = to_tvp5150(sd);
+       v4l2_std_id std = decoder->norm;
        u8 reg;
-       int pos, type=0;
+       int pos, type = 0;
 
        if (std == V4L2_STD_ALL) {
-               tvp5150_err("VBI can't be configured without knowing number of lines\n");
+               v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
                return 0;
        } else if (std & V4L2_STD_625_50) {
                /* Don't follow NTSC Line number convension */
                line += 3;
        }
 
-       if (line<6||line>27)
+       if (line < 6 || line > 27)
                return 0;
 
-       reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
+       reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
 
-       pos=tvp5150_read(c, reg)&0x0f;
-       if (pos<0x0f)
-               type=regs[pos].type.vbi_type;
+       pos = tvp5150_read(sd, reg) & 0x0f;
+       if (pos < 0x0f)
+               type = regs[pos].type.vbi_type;
 
-       pos=tvp5150_read(c, reg+1)&0x0f;
-       if (pos<0x0f)
-               type|=regs[pos].type.vbi_type;
+       pos = tvp5150_read(sd, reg + 1) & 0x0f;
+       if (pos < 0x0f)
+               type |= regs[pos].type.vbi_type;
 
        return type;
 }
-static int tvp5150_set_std(struct i2c_client *c, v4l2_std_id std)
+
+static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
 {
-       struct tvp5150 *decoder = i2c_get_clientdata(c);
-       int fmt=0;
+       struct tvp5150 *decoder = to_tvp5150(sd);
+       int fmt = 0;
 
-       decoder->norm=std;
+       decoder->norm = std;
 
        /* First tests should be against specific std */
 
        if (std == V4L2_STD_ALL) {
-               fmt=0;  /* Autodetect mode */
+               fmt = 0;        /* Autodetect mode */
        } else if (std & V4L2_STD_NTSC_443) {
-               fmt=0xa;
+               fmt = 0xa;
        } else if (std & V4L2_STD_PAL_M) {
-               fmt=0x6;
-       } else if (std & (V4L2_STD_PAL_N| V4L2_STD_PAL_Nc)) {
-               fmt=0x8;
+               fmt = 0x6;
+       } else if (std & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) {
+               fmt = 0x8;
        } else {
                /* Then, test against generic ones */
-               if (std & V4L2_STD_NTSC) {
-                       fmt=0x2;
-               } else if (std & V4L2_STD_PAL) {
-                       fmt=0x4;
-               } else if (std & V4L2_STD_SECAM) {
-                       fmt=0xc;
-               }
+               if (std & V4L2_STD_NTSC)
+                       fmt = 0x2;
+               else if (std & V4L2_STD_PAL)
+                       fmt = 0x4;
+               else if (std & V4L2_STD_SECAM)
+                       fmt = 0xc;
        }
 
-       tvp5150_dbg(1,"Set video std register to %d.\n",fmt);
-       tvp5150_write(c, TVP5150_VIDEO_STD, fmt);
-
+       v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt);
+       tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
        return 0;
 }
 
-static inline void tvp5150_reset(struct i2c_client *c)
+static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+       struct tvp5150 *decoder = to_tvp5150(sd);
+
+       if (decoder->norm == std)
+               return 0;
+
+       return tvp5150_set_std(sd, std);
+}
+
+static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
 {
+       struct tvp5150 *decoder = to_tvp5150(sd);
        u8 msb_id, lsb_id, msb_rom, lsb_rom;
-       struct tvp5150 *decoder = i2c_get_clientdata(c);
 
-       msb_id=tvp5150_read(c,TVP5150_MSB_DEV_ID);
-       lsb_id=tvp5150_read(c,TVP5150_LSB_DEV_ID);
-       msb_rom=tvp5150_read(c,TVP5150_ROM_MAJOR_VER);
-       lsb_rom=tvp5150_read(c,TVP5150_ROM_MINOR_VER);
+       msb_id = tvp5150_read(sd, TVP5150_MSB_DEV_ID);
+       lsb_id = tvp5150_read(sd, TVP5150_LSB_DEV_ID);
+       msb_rom = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER);
+       lsb_rom = tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
 
-       if ((msb_rom==4)&&(lsb_rom==0)) { /* Is TVP5150AM1 */
-               tvp5150_info("tvp%02x%02xam1 detected.\n",msb_id, lsb_id);
+       if (msb_rom == 4 && lsb_rom == 0) { /* Is TVP5150AM1 */
+               v4l2_info(sd, "tvp%02x%02xam1 detected.\n", msb_id, lsb_id);
 
                /* ITU-T BT.656.4 timing */
-               tvp5150_write(c,TVP5150_REV_SELECT,0);
+               tvp5150_write(sd, TVP5150_REV_SELECT, 0);
        } else {
-               if ((msb_rom==3)||(lsb_rom==0x21)) { /* Is TVP5150A */
-                       tvp5150_info("tvp%02x%02xa detected.\n",msb_id, lsb_id);
+               if (msb_rom == 3 || lsb_rom == 0x21) { /* Is TVP5150A */
+                       v4l2_info(sd, "tvp%02x%02xa detected.\n", msb_id, lsb_id);
                } else {
-                       tvp5150_info("*** unknown tvp%02x%02x chip detected.\n",msb_id,lsb_id);
-                       tvp5150_info("*** Rom ver is %d.%d\n",msb_rom,lsb_rom);
+                       v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
+                                       msb_id, lsb_id);
+                       v4l2_info(sd, "*** Rom ver is %d.%d\n", msb_rom, lsb_rom);
                }
        }
 
        /* Initializes TVP5150 to its default values */
-       tvp5150_write_inittab(c, tvp5150_init_default);
+       tvp5150_write_inittab(sd, tvp5150_init_default);
 
        /* Initializes VDP registers */
-       tvp5150_vdp_init(c, vbi_ram_default);
+       tvp5150_vdp_init(sd, vbi_ram_default);
 
        /* Selects decoder input */
-       tvp5150_selmux(c);
+       tvp5150_selmux(sd);
 
        /* Initializes TVP5150 to stream enabled values */
-       tvp5150_write_inittab(c, tvp5150_init_enable);
+       tvp5150_write_inittab(sd, tvp5150_init_enable);
 
        /* Initialize image preferences */
-       tvp5150_write(c, TVP5150_BRIGHT_CTL, decoder->bright);
-       tvp5150_write(c, TVP5150_CONTRAST_CTL, decoder->contrast);
-       tvp5150_write(c, TVP5150_SATURATION_CTL, decoder->contrast);
-       tvp5150_write(c, TVP5150_HUE_CTL, decoder->hue);
+       tvp5150_write(sd, TVP5150_BRIGHT_CTL, decoder->bright);
+       tvp5150_write(sd, TVP5150_CONTRAST_CTL, decoder->contrast);
+       tvp5150_write(sd, TVP5150_SATURATION_CTL, decoder->contrast);
+       tvp5150_write(sd, TVP5150_HUE_CTL, decoder->hue);
 
-       tvp5150_set_std(c, decoder->norm);
+       tvp5150_set_std(sd, decoder->norm);
+       return 0;
 };
 
-static int tvp5150_get_ctrl(struct i2c_client *c, struct v4l2_control *ctrl)
+static int tvp5150_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-/*     struct tvp5150 *decoder = i2c_get_clientdata(c); */
+       v4l2_dbg(1, debug, sd, "VIDIOC_G_CTRL called\n");
 
        switch (ctrl->id) {
        case V4L2_CID_BRIGHTNESS:
-               ctrl->value = tvp5150_read(c, TVP5150_BRIGHT_CTL);
+               ctrl->value = tvp5150_read(sd, TVP5150_BRIGHT_CTL);
                return 0;
        case V4L2_CID_CONTRAST:
-               ctrl->value = tvp5150_read(c, TVP5150_CONTRAST_CTL);
+               ctrl->value = tvp5150_read(sd, TVP5150_CONTRAST_CTL);
                return 0;
        case V4L2_CID_SATURATION:
-               ctrl->value = tvp5150_read(c, TVP5150_SATURATION_CTL);
+               ctrl->value = tvp5150_read(sd, TVP5150_SATURATION_CTL);
                return 0;
        case V4L2_CID_HUE:
-               ctrl->value = tvp5150_read(c, TVP5150_HUE_CTL);
+               ctrl->value = tvp5150_read(sd, TVP5150_HUE_CTL);
                return 0;
        }
        return -EINVAL;
 }
 
-static int tvp5150_set_ctrl(struct i2c_client *c, struct v4l2_control *ctrl)
+static int tvp5150_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-/*     struct tvp5150 *decoder = i2c_get_clientdata(c); */
+       u8 i, n;
+       n = ARRAY_SIZE(tvp5150_qctrl);
+
+       for (i = 0; i < n; i++) {
+               if (ctrl->id != tvp5150_qctrl[i].id)
+                       continue;
+               if (ctrl->value < tvp5150_qctrl[i].minimum ||
+                   ctrl->value > tvp5150_qctrl[i].maximum)
+                       return -ERANGE;
+               v4l2_dbg(1, debug, sd, "VIDIOC_S_CTRL: id=%d, value=%d\n",
+                                       ctrl->id, ctrl->value);
+               break;
+       }
 
        switch (ctrl->id) {
        case V4L2_CID_BRIGHTNESS:
-               tvp5150_write(c, TVP5150_BRIGHT_CTL, ctrl->value);
+               tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->value);
                return 0;
        case V4L2_CID_CONTRAST:
-               tvp5150_write(c, TVP5150_CONTRAST_CTL, ctrl->value);
+               tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->value);
                return 0;
        case V4L2_CID_SATURATION:
-               tvp5150_write(c, TVP5150_SATURATION_CTL, ctrl->value);
+               tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->value);
                return 0;
        case V4L2_CID_HUE:
-               tvp5150_write(c, TVP5150_HUE_CTL, ctrl->value);
+               tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->value);
                return 0;
        }
        return -EINVAL;
@@ -863,242 +885,195 @@ static int tvp5150_set_ctrl(struct i2c_client *c, struct v4l2_control *ctrl)
 /****************************************************************************
                        I2C Command
  ****************************************************************************/
-static int tvp5150_command(struct i2c_client *c,
-                          unsigned int cmd, void *arg)
-{
-       struct tvp5150 *decoder = i2c_get_clientdata(c);
-
-       switch (cmd) {
-
-       case 0:
-       case VIDIOC_INT_RESET:
-               tvp5150_reset(c);
-               break;
-       case VIDIOC_INT_G_VIDEO_ROUTING:
-       {
-               struct v4l2_routing *route = arg;
 
-               *route = decoder->route;
-               break;
-       }
-       case VIDIOC_INT_S_VIDEO_ROUTING:
-       {
-               struct v4l2_routing *route = arg;
-
-               decoder->route = *route;
-               tvp5150_selmux(c);
-               break;
-       }
-       case VIDIOC_S_STD:
-               if (decoder->norm == *(v4l2_std_id *)arg)
-                       break;
-               return tvp5150_set_std(c, *(v4l2_std_id *)arg);
-       case VIDIOC_G_STD:
-               *(v4l2_std_id *)arg = decoder->norm;
-               break;
+static int tvp5150_s_routing(struct v4l2_subdev *sd, const struct v4l2_routing *route)
+{
+       struct tvp5150 *decoder = to_tvp5150(sd);
 
-       case VIDIOC_G_SLICED_VBI_CAP:
-       {
-               struct v4l2_sliced_vbi_cap *cap = arg;
-               tvp5150_dbg(1, "VIDIOC_G_SLICED_VBI_CAP\n");
+       decoder->route = *route;
+       tvp5150_selmux(sd);
+       return 0;
+}
 
-               tvp5150_vbi_get_cap(vbi_ram_default, cap);
-               break;
+static int tvp5150_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+       struct v4l2_sliced_vbi_format *svbi;
+       int i;
+
+       /* raw vbi */
+       if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+               /* this is for capturing 36 raw vbi lines
+                  if there's a way to cut off the beginning 2 vbi lines
+                  with the tvp5150 then the vbi line count could be lowered
+                  to 17 lines/field again, although I couldn't find a register
+                  which could do that cropping */
+               if (fmt->fmt.vbi.sample_format == V4L2_PIX_FMT_GREY)
+                       tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
+               if (fmt->fmt.vbi.count[0] == 18 && fmt->fmt.vbi.count[1] == 18) {
+                       tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
+                       tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
+               }
+               return 0;
        }
-       case VIDIOC_S_FMT:
-       {
-               struct v4l2_format *fmt;
-               struct v4l2_sliced_vbi_format *svbi;
-               int i;
-
-               fmt = arg;
-               /* raw vbi */
-               if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
-                       /* this is for capturing 36 raw vbi lines
-                          if there's a way to cut off the beginning 2 vbi lines
-                          with the tvp5150 then the vbi line count could be lowered
-                          to 17 lines/field again, although I couldn't find a register
-                          which could do that cropping */
-                       if (fmt->fmt.vbi.sample_format == V4L2_PIX_FMT_GREY)
-                               tvp5150_write(c, TVP5150_LUMA_PROC_CTL_1, 0x70);
-                       if (fmt->fmt.vbi.count[0] == 18 && fmt->fmt.vbi.count[1] == 18) {
-                               tvp5150_write(c, TVP5150_VERT_BLANKING_START, 0x00);
-                               tvp5150_write(c, TVP5150_VERT_BLANKING_STOP, 0x01);
-                       }
-                       break;
+       if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
+               return -EINVAL;
+       svbi = &fmt->fmt.sliced;
+       if (svbi->service_set != 0) {
+               for (i = 0; i <= 23; i++) {
+                       svbi->service_lines[1][i] = 0;
+                       svbi->service_lines[0][i] =
+                               tvp5150_set_vbi(sd, vbi_ram_default,
+                                      svbi->service_lines[0][i], 0xf0, i, 3);
                }
-               if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
-                       return -EINVAL;
-               svbi = &fmt->fmt.sliced;
-               if (svbi->service_set != 0) {
-                       for (i = 0; i <= 23; i++) {
-                               svbi->service_lines[1][i] = 0;
-
-                               svbi->service_lines[0][i]=tvp5150_set_vbi(c,
-                                        vbi_ram_default,
-                                        svbi->service_lines[0][i],0xf0,i,3);
-                       }
-                       /* Enables FIFO */
-                       tvp5150_write(c, TVP5150_FIFO_OUT_CTRL,1);
-               } else {
-                       /* Disables FIFO*/
-                       tvp5150_write(c, TVP5150_FIFO_OUT_CTRL,0);
+               /* Enables FIFO */
+               tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
+       } else {
+               /* Disables FIFO*/
+               tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
 
-                       /* Disable Full Field */
-                       tvp5150_write(c, TVP5150_FULL_FIELD_ENA, 0);
+               /* Disable Full Field */
+               tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
 
-                       /* Disable Line modes */
-                       for (i=TVP5150_LINE_MODE_INI; i<=TVP5150_LINE_MODE_END; i++)
-                               tvp5150_write(c, i, 0xff);
-               }
-               break;
+               /* Disable Line modes */
+               for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
+                       tvp5150_write(sd, i, 0xff);
        }
-       case VIDIOC_G_FMT:
-       {
-               struct v4l2_format *fmt;
-               struct v4l2_sliced_vbi_format *svbi;
+       return 0;
+}
 
-               int i, mask=0;
+static int tvp5150_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+       struct v4l2_sliced_vbi_format *svbi;
+       int i, mask = 0;
 
-               fmt = arg;
-               if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
-                       return -EINVAL;
-               svbi = &fmt->fmt.sliced;
-               memset(svbi, 0, sizeof(*svbi));
+       if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
+               return -EINVAL;
+       svbi = &fmt->fmt.sliced;
+       memset(svbi, 0, sizeof(*svbi));
 
-               for (i = 0; i <= 23; i++) {
-                       svbi->service_lines[0][i]=tvp5150_get_vbi(c,
-                               vbi_ram_default,i);
-                       mask|=svbi->service_lines[0][i];
-               }
-               svbi->service_set=mask;
-               break;
+       for (i = 0; i <= 23; i++) {
+               svbi->service_lines[0][i] =
+                       tvp5150_get_vbi(sd, vbi_ram_default, i);
+               mask |= svbi->service_lines[0][i];
        }
+       svbi->service_set = mask;
+       return 0;
+}
+
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-       case VIDIOC_DBG_G_REGISTER:
-       case VIDIOC_DBG_S_REGISTER:
-       {
-               struct v4l2_register *reg = arg;
-
-               if (!v4l2_chip_match_i2c_client(c, reg->match_type, reg->match_chip))
-                       return -EINVAL;
-               if (!capable(CAP_SYS_ADMIN))
-                       return -EPERM;
-               if (cmd == VIDIOC_DBG_G_REGISTER)
-                       reg->val = tvp5150_read(c, reg->reg & 0xff);
-               else
-                       tvp5150_write(c, reg->reg & 0xff, reg->val & 0xff);
-               break;
-       }
-#endif
+static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_register *reg)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
 
-       case VIDIOC_LOG_STATUS:
-               dump_reg(c);
-               break;
+       if (!v4l2_chip_match_i2c_client(client,
+                               reg->match_type, reg->match_chip))
+               return -EINVAL;
+       if (!capable(CAP_SYS_ADMIN))
+               return -EPERM;
+       reg->val = tvp5150_read(sd, reg->reg & 0xff);
+       return 0;
+}
 
-       case VIDIOC_G_TUNER:
-               {
-                       struct v4l2_tuner *vt = arg;
-                       int status = tvp5150_read(c, 0x88);
+static int tvp5150_s_register(struct v4l2_subdev *sd, struct v4l2_register *reg)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(sd);
 
-                       vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
-                       break;
-               }
-       case VIDIOC_QUERYCTRL:
-               {
-                       struct v4l2_queryctrl *qc = arg;
-                       int i;
+       if (!v4l2_chip_match_i2c_client(client,
+                               reg->match_type, reg->match_chip))
+               return -EINVAL;
+       if (!capable(CAP_SYS_ADMIN))
+               return -EPERM;
+       tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
+       return 0;
+}
+#endif
 
-                       tvp5150_dbg(1, "VIDIOC_QUERYCTRL called\n");
+static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
+{
+       int status = tvp5150_read(sd, 0x88);
 
-                       for (i = 0; i < ARRAY_SIZE(tvp5150_qctrl); i++)
-                               if (qc->id && qc->id == tvp5150_qctrl[i].id) {
-                                       memcpy(qc, &(tvp5150_qctrl[i]),
-                                              sizeof(*qc));
-                                       return 0;
-                               }
+       vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
+       return 0;
+}
 
-                       return -EINVAL;
-               }
-       case VIDIOC_G_CTRL:
-               {
-                       struct v4l2_control *ctrl = arg;
-                       tvp5150_dbg(1, "VIDIOC_G_CTRL called\n");
+static int tvp5150_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+       int i;
 
-                       return tvp5150_get_ctrl(c, ctrl);
-               }
-       case VIDIOC_S_CTRL:
-               {
-                       struct v4l2_control *ctrl = arg;
-                       u8 i, n;
-                       n = ARRAY_SIZE(tvp5150_qctrl);
-                       for (i = 0; i < n; i++)
-                               if (ctrl->id == tvp5150_qctrl[i].id) {
-                                       if (ctrl->value <
-                                           tvp5150_qctrl[i].minimum
-                                           || ctrl->value >
-                                           tvp5150_qctrl[i].maximum)
-                                               return -ERANGE;
-                                       tvp5150_dbg(1,
-                                               "VIDIOC_S_CTRL: id=%d, value=%d\n",
-                                               ctrl->id, ctrl->value);
-                                       return tvp5150_set_ctrl(c, ctrl);
-                               }
-                       return -EINVAL;
+       v4l2_dbg(1, debug, sd, "VIDIOC_QUERYCTRL called\n");
+
+       for (i = 0; i < ARRAY_SIZE(tvp5150_qctrl); i++)
+               if (qc->id && qc->id == tvp5150_qctrl[i].id) {
+                       memcpy(qc, &(tvp5150_qctrl[i]),
+                              sizeof(*qc));
+                       return 0;
                }
 
-       default:
-               return -EINVAL;
-       }
+       return -EINVAL;
+}
 
-       return 0;
+static int tvp5150_command(struct i2c_client *client, unsigned cmd, void *arg)
+{
+       return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
 }
 
+/* ----------------------------------------------------------------------- */
+
+static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
+       .log_status = tvp5150_log_status,
+       .g_ctrl = tvp5150_g_ctrl,
+       .s_ctrl = tvp5150_s_ctrl,
+       .queryctrl = tvp5150_queryctrl,
+       .reset = tvp5150_reset,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+       .g_register = tvp5150_g_register,
+       .s_register = tvp5150_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
+       .s_std = tvp5150_s_std,
+       .g_tuner = tvp5150_g_tuner,
+};
+
+static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
+       .s_routing = tvp5150_s_routing,
+       .g_fmt = tvp5150_g_fmt,
+       .s_fmt = tvp5150_s_fmt,
+       .g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
+};
+
+static const struct v4l2_subdev_ops tvp5150_ops = {
+       .core = &tvp5150_core_ops,
+       .tuner = &tvp5150_tuner_ops,
+       .video = &tvp5150_video_ops,
+};
+
+
 /****************************************************************************
                        I2C Client & Driver
  ****************************************************************************/
-static struct i2c_driver driver;
-
-static struct i2c_client client_template = {
-       .name = "(unset)",
-       .driver = &driver,
-};
 
-static int tvp5150_detect_client(struct i2c_adapter *adapter,
-                                int address, int kind)
+static int tvp5150_probe(struct i2c_client *c,
+                        const struct i2c_device_id *id)
 {
-       struct i2c_client *c;
        struct tvp5150 *core;
-       int rv;
-
-       if (debug)
-               printk( KERN_INFO
-               "tvp5150.c: detecting tvp5150 client on address 0x%x\n",
-               address << 1);
-
-       client_template.adapter = adapter;
-       client_template.addr = address;
+       struct v4l2_subdev *sd;
 
        /* Check if the adapter supports the needed features */
-       if (!i2c_check_functionality
-           (adapter,
+       if (!i2c_check_functionality(c->adapter,
             I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
-               return 0;
-
-       c = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
-       if (!c)
-               return -ENOMEM;
-       memcpy(c, &client_template, sizeof(struct i2c_client));
+               return -EIO;
 
        core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL);
        if (!core) {
-               kfree(c);
                return -ENOMEM;
        }
-       i2c_set_clientdata(c, core);
-
-       rv = i2c_attach_client(c);
+       sd = &core->sd;
+       v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
+       v4l_info(c, "chip found @ 0x%02x (%s)\n",
+                c->addr << 1, c->adapter->name);
 
        core->norm = V4L2_STD_ALL;      /* Default is autodetect */
        core->route.input = TVP5150_COMPOSITE1;
@@ -1108,69 +1083,38 @@ static int tvp5150_detect_client(struct i2c_adapter *adapter,
        core->hue = 0;
        core->sat = 128;
 
-       if (rv) {
-               kfree(c);
-               kfree(core);
-               return rv;
-       }
-
        if (debug > 1)
-               dump_reg(c);
+               tvp5150_log_status(sd);
        return 0;
 }
 
-static int tvp5150_attach_adapter(struct i2c_adapter *adapter)
+static int tvp5150_remove(struct i2c_client *c)
 {
-       if (debug)
-               printk( KERN_INFO
-               "tvp5150.c: starting probe for adapter %s (0x%x)\n",
-               adapter->name, adapter->id);
-       return i2c_probe(adapter, &addr_data, &tvp5150_detect_client);
-}
-
-static int tvp5150_detach_client(struct i2c_client *c)
-{
-       struct tvp5150 *decoder = i2c_get_clientdata(c);
-       int err;
+       struct v4l2_subdev *sd = i2c_get_clientdata(c);
 
-       tvp5150_dbg(1,
+       v4l2_dbg(1, debug, sd,
                "tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
                c->addr << 1);
 
-       err = i2c_detach_client(c);
-       if (err) {
-               return err;
-       }
-
-       kfree(decoder);
-       kfree(c);
-
+       v4l2_device_unregister_subdev(sd);
+       kfree(to_tvp5150(sd));
        return 0;
 }
 
 /* ----------------------------------------------------------------------- */
 
-static struct i2c_driver driver = {
-       .driver = {
-               .name = "tvp5150",
-       },
-       .id = I2C_DRIVERID_TVP5150,
-
-       .attach_adapter = tvp5150_attach_adapter,
-       .detach_client = tvp5150_detach_client,
+static const struct i2c_device_id tvp5150_id[] = {
+       { "tvp5150", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, tvp5150_id);
 
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+       .name = "tvp5150",
+       .driverid = I2C_DRIVERID_TVP5150,
        .command = tvp5150_command,
+       .probe = tvp5150_probe,
+       .remove = tvp5150_remove,
+       .legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL,
+       .id_table = tvp5150_id,
 };
-
-static int __init tvp5150_init(void)
-{
-       return i2c_add_driver(&driver);
-}
-
-static void __exit tvp5150_exit(void)
-{
-       i2c_del_driver(&driver);
-}
-
-module_init(tvp5150_init);
-module_exit(tvp5150_exit);