sl82c105: program DMA/PIO timings in ->dma_start/->ide_dma_end

* Program DMA timings in sl82c105_dma_start() (->dma_start method)
  before starting DMA transfer.

* Add sl82c105_dma_end() (->ide_dma_end method) to switch back to
  PIO timings when DMA transfer is complete.

* In sl82c105_set_pio_mode() program timings regardless of ->using_dma
  setting and in sl82c105_set_dma_mode() only cache the new timings.

* Remove no longer needed sl82c105_{ide_dma_on,off_quietly}().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 069f104fdceafbcd1ddf4e1cb835b77b731ff78d..a85413467f93c5352e6a215f735eac51b175fc7c 100644 (file)
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -13,6 +13,7 @@
  *  -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org
  *
  * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C)      2007 Bartlomiej Zolnierkiewicz
  */
 
 #include <linux/types.h>
@@ -90,14 +91,8 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
        drive->drive_data &= 0xffff0000;
        drive->drive_data |= drv_ctrl;
 
-       if (!drive->using_dma) {
-               /*
-                * If we are actually using MW DMA, then we can not
-                * reprogram the interface drive control register.
-                */
-               pci_write_config_word(dev, reg,  drv_ctrl);
-               pci_read_config_word (dev, reg, &drv_ctrl);
-       }
+       pci_write_config_word(dev, reg,  drv_ctrl);
+       pci_read_config_word (dev, reg, &drv_ctrl);
 
        printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
                          ide_xfer_verbose(pio + XFER_PIO_0),
@@ -123,17 +118,6 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
         */
        drive->drive_data &= 0x0000ffff;
        drive->drive_data |= (unsigned long)drv_ctrl << 16;
-
-       /*
-        * If we are already using DMA, we just reprogram
-        * the drive control register.
-        */
-       if (drive->using_dma) {
-               struct pci_dev *dev     = HWIF(drive)->pci_dev;
-               int reg                 = 0x44 + drive->dn * 4;
-
-               pci_write_config_word(dev, reg, drv_ctrl);
-       }
 }
 
 /*
@@ -201,6 +185,11 @@ static void sl82c105_dma_start(ide_drive_t *drive)
 {
        ide_hwif_t *hwif        = HWIF(drive);
        struct pci_dev *dev     = hwif->pci_dev;
+       int reg                 = 0x44 + drive->dn * 4;
+
+       DBG(("%s(drive:%s)\n", __FUNCTION__, drive->name));
+
+       pci_write_config_word(dev, reg, drive->drive_data >> 16);
 
        sl82c105_reset_host(dev);
        ide_dma_start(drive);
@@ -214,32 +203,19 @@ static void sl82c105_dma_timeout(ide_drive_t *drive)
        ide_dma_timeout(drive);
 }
 
-static int sl82c105_ide_dma_on(ide_drive_t *drive)
-{
-       struct pci_dev *dev     = HWIF(drive)->pci_dev;
-       int rc, reg             = 0x44 + drive->dn * 4;
-
-       DBG(("sl82c105_ide_dma_on(drive:%s)\n", drive->name));
-
-       rc = __ide_dma_on(drive);
-       if (rc == 0) {
-               pci_write_config_word(dev, reg, drive->drive_data >> 16);
-
-               printk(KERN_INFO "%s: DMA enabled\n", drive->name);
-       }
-       return rc;
-}
-
-static void sl82c105_dma_off_quietly(ide_drive_t *drive)
+static int sl82c105_dma_end(ide_drive_t *drive)
 {
        struct pci_dev *dev     = HWIF(drive)->pci_dev;
        int reg                 = 0x44 + drive->dn * 4;
+       int ret;
+
+       DBG(("%s(drive:%s)\n", __FUNCTION__, drive->name));
 
-       DBG(("sl82c105_dma_off_quietly(drive:%s)\n", drive->name));
+       ret = __ide_dma_end(drive);
 
        pci_write_config_word(dev, reg, drive->drive_data);
 
-       ide_dma_off_quietly(drive);
+       return ret;
 }
 
 /*
@@ -369,10 +345,9 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
 
        hwif->mwdma_mask = ATA_MWDMA2;
 
-       hwif->ide_dma_on                = &sl82c105_ide_dma_on;
-       hwif->dma_off_quietly           = &sl82c105_dma_off_quietly;
        hwif->dma_lost_irq              = &sl82c105_dma_lost_irq;
        hwif->dma_start                 = &sl82c105_dma_start;
+       hwif->ide_dma_end               = &sl82c105_dma_end;
        hwif->dma_timeout               = &sl82c105_dma_timeout;
 
        if (hwif->mate)