aec62xx: no need to disable UDMA in ->init_hwif method for ATP850UF

* No need to disable UDMA in ->init_hwif method for ATP850UF (and since we
  now always tune PIO it will be disabled by ->set_pio_mode calls anyway).

* Bump driver version.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 3f03acea598797ec3ed1285e122df54359d92731..be0d077dbbdf673732dd06c5ec9f1a429df5a88e 100644 (file)
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/aec62xx.c             Version 0.25    Aug 1, 2007
+ * linux/drivers/ide/pci/aec62xx.c             Version 0.26    Sep 1, 2007
  *
  * Copyright (C) 1999-2002     Andre Hedrick <andre@linux-ide.org>
  * Copyright (C) 2007          MontaVista Software, Inc. <source@mvista.com>
@@ -184,8 +184,6 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
 static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
 {
        struct pci_dev *dev     = hwif->pci_dev;
-       u8 reg54 = 0,  mask     = hwif->channel ? 0xf0 : 0x0f;
-       unsigned long flags;
 
        hwif->set_pio_mode = &aec_set_pio_mode;
 
@@ -203,12 +201,10 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
 
        hwif->dma_lost_irq      = &aec62xx_dma_lost_irq;
 
-       if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
-               spin_lock_irqsave(&ide_lock, flags);
-               pci_read_config_byte (dev, 0x54, &reg54);
-               pci_write_config_byte(dev, 0x54, (reg54 & ~mask));
-               spin_unlock_irqrestore(&ide_lock, flags);
-       } else if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
+       if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
+               return;
+
+       if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
                u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
 
                pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);