[ARM] 5095/2: pcm990: switch from pxa_gpio_mode to pxa2xx_mfp_config

pxa_gpio_mode() is deprecated, use the new pxa2xx_mfp_config() function to
configure GPIOs in pcm990 platform code. Convert "array, ARRAY_SIZE(array)"
to "ARRAY_AND_SIZE(array)" while at it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 5d87c7c866e4b30da57fa90a1693741220298815..30023b00e476161a691aa8a5603c1a0b08fa534d 100644 (file)
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -33,14 +33,30 @@
 #include <asm/arch/camera.h>
 #include <asm/mach/map.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pcm990_baseboard.h>
 #include <asm/arch/pxafb.h>
+#include <asm/arch/mfp-pxa27x.h>
 
 #include "devices.h"
+#include "generic.h"
+
+static unsigned long pcm990_pin_config[] __initdata = {
+       /* MMC */
+       GPIO32_MMC_CLK,
+       GPIO112_MMC_CMD,
+       GPIO92_MMC_DAT_0,
+       GPIO109_MMC_DAT_1,
+       GPIO110_MMC_DAT_2,
+       GPIO111_MMC_DAT_3,
+       /* USB */
+       GPIO88_USBH1_PWR,
+       GPIO89_USBH1_PEN,
+       /* PWM0 */
+       GPIO16_PWM0_OUT,
+};
 
 /*
  * pcm990_lcd_power - control power supply to the LCD
@@ -277,16 +293,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 {
        int err;
 
-       /*
-        * enable GPIO for PXA27x MMC controller
-        */
-       pxa_gpio_mode(GPIO32_MMCCLK_MD);
-       pxa_gpio_mode(GPIO112_MMCCMD_MD);
-       pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-       pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-       pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-       pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
        err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
                             "MMC card detect", data);
        if (err)
@@ -333,8 +339,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
  */
 static int pcm990_ohci_init(struct device *dev)
 {
-       pxa_gpio_mode(PCM990_USB_OVERCURRENT);
-       pxa_gpio_mode(PCM990_USB_PWR_EN);
        /*
         * disable USB port 2 and 3
         * power sense is active low
@@ -361,23 +365,27 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = {
  * PXA27x Camera specific stuff
  */
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static unsigned long pcm990_camera_pin_config[] = {
+       /* CIF */
+       GPIO98_CIF_DD_0,
+       GPIO105_CIF_DD_1,
+       GPIO104_CIF_DD_2,
+       GPIO103_CIF_DD_3,
+       GPIO95_CIF_DD_4,
+       GPIO94_CIF_DD_5,
+       GPIO93_CIF_DD_6,
+       GPIO108_CIF_DD_7,
+       GPIO107_CIF_DD_8,
+       GPIO106_CIF_DD_9,
+       GPIO42_CIF_MCLK,
+       GPIO45_CIF_PCLK,
+       GPIO43_CIF_FV,
+       GPIO44_CIF_LV,
+};
+
 static int pcm990_pxacamera_init(struct device *dev)
 {
-       pxa_gpio_mode(GPIO98_CIF_DD_0_MD);
-       pxa_gpio_mode(GPIO105_CIF_DD_1_MD);
-       pxa_gpio_mode(GPIO104_CIF_DD_2_MD);
-       pxa_gpio_mode(GPIO103_CIF_DD_3_MD);
-       pxa_gpio_mode(GPIO95_CIF_DD_4_MD);
-       pxa_gpio_mode(GPIO94_CIF_DD_5_MD);
-       pxa_gpio_mode(GPIO93_CIF_DD_6_MD);
-       pxa_gpio_mode(GPIO108_CIF_DD_7_MD);
-       pxa_gpio_mode(GPIO107_CIF_DD_8_MD);
-       pxa_gpio_mode(GPIO106_CIF_DD_9_MD);
-       pxa_gpio_mode(GPIO42_CIF_MCLK_MD);
-       pxa_gpio_mode(GPIO45_CIF_PCLK_MD);
-       pxa_gpio_mode(GPIO43_CIF_FV_MD);
-       pxa_gpio_mode(GPIO44_CIF_LV_MD);
-
+       pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
        return 0;
 }
 
@@ -449,8 +457,10 @@ static struct map_desc pcm990_io_desc[] __initdata = {
  */
 void __init pcm990_baseboard_init(void)
 {
+       pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
+
        /* register CPLD access */
-       iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+       iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
 
        /* register CPLD's IRQ controller */
        pcm990_init_irq();
@@ -458,7 +468,6 @@ void __init pcm990_baseboard_init(void)
 #ifndef CONFIG_PCM990_DISPLAY_NONE
        set_pxa_fb_info(&pcm990_fbinfo);
 #endif
-       pxa_gpio_mode(GPIO16_PWM0_MD);
        platform_device_register(&pcm990_backlight_device);
 
        /* MMC */
@@ -473,9 +482,8 @@ void __init pcm990_baseboard_init(void)
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
        pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
-       i2c_register_board_info(0, pcm990_i2c_devices,
-               ARRAY_SIZE(pcm990_i2c_devices));
+       i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
 #endif
 
-       printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+       printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
 }