USB: add new moto_modem driver for some Morotola phones

This should work on a KRZR K1m, and some other Motorola phones that do
not use the "standard" cdc ACM protocol to talk to USB hosts.

Tested-by: Jeff Garzik <jeff@garzik.org>
Cc: Jiang Dejun <a5652c@motorola.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 2cffec85ee7e6581d95f14971a2afc7fe1eadbce..9ba64ccc135922af584d74fbc4e1c4877f71dfd8 100644 (file)
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -447,6 +447,15 @@ config USB_SERIAL_MOS7840
          To compile this driver as a module, choose M here: the
          module will be called mos7840.  If unsure, choose N.
 
+config USB_SERIAL_MOTOROLA
+       tristate "USB Motorola Phone modem driver"
+       ---help---
+         Say Y here if you want to use a Motorola phone with a USB
+         connector as a modem link.
+
+         To compile this driver as a module, choose M here: the
+         module will be called moto_modem.  If unsure, choose N.
+
 config USB_SERIAL_NAVMAN
        tristate "USB Navman GPS device"
        help

diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 756859510d8c2cfff713b6ff13b7f0076b5bf057..17a762ab67697b0b04cc943af8e673fff6e3cc5e 100644 (file)
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_USB_SERIAL_KOBIL_SCT)            += kobil_sct.o
 obj-$(CONFIG_USB_SERIAL_MCT_U232)              += mct_u232.o
 obj-$(CONFIG_USB_SERIAL_MOS7720)               += mos7720.o
 obj-$(CONFIG_USB_SERIAL_MOS7840)               += mos7840.o
+obj-$(CONFIG_USB_SERIAL_MOTOROLA)              += moto_modem.o
 obj-$(CONFIG_USB_SERIAL_NAVMAN)                        += navman.o
 obj-$(CONFIG_USB_SERIAL_OMNINET)               += omninet.o
 obj-$(CONFIG_USB_SERIAL_OPTION)                        += option.o

diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
new file mode 100644 (file)
index 0000000..2e8e054
--- /dev/null
+++ b/drivers/usb/serial/moto_modem.c
@@ -0,0 +1,70 @@
+/*
+ * Motorola USB Phone driver
+ *
+ * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ * {sigh}
+ * Mororola should be using the CDC ACM USB spec, but instead
+ * they try to just "do their own thing"...  This driver should handle a
+ * few phones in which a basic "dumb serial connection" is needed to be
+ * able to get a connection through to them.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static struct usb_device_id id_table [] = {
+       { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */
+       { USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */
+       { USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */
+       { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver moto_driver = {
+       .name =         "moto-modem",
+       .probe =        usb_serial_probe,
+       .disconnect =   usb_serial_disconnect,
+       .id_table =     id_table,
+       .no_dynamic_id =        1,
+};
+
+static struct usb_serial_driver moto_device = {
+       .driver = {
+               .owner =        THIS_MODULE,
+               .name =         "moto-modem",
+       },
+       .id_table =             id_table,
+       .num_ports =            1,
+};
+
+static int __init moto_init(void)
+{
+       int retval;
+
+       retval = usb_serial_register(&moto_device);
+       if (retval)
+               return retval;
+       retval = usb_register(&moto_driver);
+       if (retval)
+               usb_serial_deregister(&moto_device);
+       return retval;
+}
+
+static void __exit moto_exit(void)
+{
+       usb_deregister(&moto_driver);
+       usb_serial_deregister(&moto_device);
+}
+
+module_init(moto_init);
+module_exit(moto_exit);
+MODULE_LICENSE("GPL");