static struct menelaus_chip menelaus;
-static void menelaus_write(u8 value, u8 reg)
+static int menelaus_write_reg(int reg, u8 value)
{
- if (i2c_smbus_write_byte_data(&menelaus.client, reg, value) < 0)
+ int val = i2c_smbus_write_byte_data(&menelaus.client, reg, value);
+
+ if (val < 0) {
pr_err("write error");
+ return val;
+ }
+
+ return 0;
}
-static u8 menelaus_read(u8 reg)
+static int menelaus_read_reg(int reg)
{
int val = i2c_smbus_read_byte_data(&menelaus.client, reg);
- if (val < 0) {
+ if (val < 0)
pr_err("read error");
- return 0;
- }
return val;
}
-static void menelaus_enable_irq(int irq)
+static int menelaus_enable_irq(int irq)
{
if (irq > 7)
- menelaus_write(menelaus_read(MENELAUS_INT_MASK2) &
- ~(1 << (irq - 8)), MENELAUS_INT_MASK2);
+ return menelaus_write_reg(MENELAUS_INT_MASK2,
+ menelaus_read_reg(MENELAUS_INT_MASK2)
+ & ~(1 << (irq - 8)));
else
- menelaus_write(menelaus_read(MENELAUS_INT_MASK1) &
- ~(1 << irq), MENELAUS_INT_MASK1);
+ return menelaus_write_reg(MENELAUS_INT_MASK1,
+ menelaus_read_reg(MENELAUS_INT_MASK1)
+ & ~(1 << irq));
}
-static void menelaus_disable_irq(int irq)
+static int menelaus_disable_irq(int irq)
{
if (irq > 7)
- menelaus_write(menelaus_read(MENELAUS_INT_MASK2)
- | (1 << (irq - 8)), MENELAUS_INT_MASK2);
+ return menelaus_write_reg(menelaus_read_reg(MENELAUS_INT_MASK2)
+ | (1 << (irq - 8)),
+ MENELAUS_INT_MASK2);
else
- menelaus_write(menelaus_read(MENELAUS_INT_MASK1)
- | (1 << irq), MENELAUS_INT_MASK1);
+ return menelaus_write_reg(MENELAUS_INT_MASK1,
+ menelaus_read_reg(MENELAUS_INT_MASK1)
+ | (1 << irq));
}
-static void menelaus_ack_irq(int irq)
+static int menelaus_ack_irq(int irq)
{
if (irq > 7)
- menelaus_write(1 << (irq - 8), MENELAUS_INT_ACK2);
+ return menelaus_write_reg(MENELAUS_INT_ACK2, 1 << (irq - 8));
else
- menelaus_write(1 << irq, MENELAUS_INT_ACK1);
+ return menelaus_write_reg(MENELAUS_INT_ACK1, 1 << irq);
}
/* Adds a handler for an interrupt. Does not run in interrupt context */
static int menelaus_add_irq_work(int irq, void * handler)
{
+ int ret = 0;
+
mutex_lock(&menelaus.lock);
menelaus.handlers[irq] = handler;
- menelaus_enable_irq(irq);
+ ret = menelaus_enable_irq(irq);
mutex_unlock(&menelaus.lock);
- return 0;
+ return ret;
}
/* Removes handler for an interrupt */
-static void menelaus_remove_irq_work(int irq)
+static int menelaus_remove_irq_work(int irq)
{
+ int ret = 0;
+
mutex_lock(&menelaus.lock);
- menelaus_disable_irq(irq);
+ ret = menelaus_disable_irq(irq);
menelaus.handlers[irq] = NULL;
mutex_unlock(&menelaus.lock);
+
+ return ret;
}
/*-----------------------------------------------------------------------*/
* Toggles the MMC slots between open-drain and push-pull mode.
* We always set both slots the same way.
*/
-void menelaus_mmc_opendrain(int enable)
+int menelaus_mmc_opendrain(int enable)
{
- unsigned char reg = menelaus_read(MENELAUS_MCT_CTRL1);
+ int reg, ret = 0;
+
+ mutex_lock(&menelaus.lock);
+ reg = menelaus_read_reg(MENELAUS_MCT_CTRL1);
+ if (reg < 0) {
+ mutex_unlock(&menelaus.lock);
+ return reg;
+ }
if (enable)
reg |= (0x3 << 2);
else
reg &= ~(0x3 << 2);
- menelaus_write(reg, MENELAUS_MCT_CTRL1);
+ ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, reg);
+ mutex_unlock(&menelaus.lock);
+
+ return ret;
}
EXPORT_SYMBOL(menelaus_mmc_opendrain);
* in each slot. In this case the cards are not seen by menelaus.
* FIXME: Add handling for D1 too
*/
-static int menelaus_mmc_cd_work(struct menelaus_chip *menelaus)
+static int menelaus_mmc_cd_work(struct menelaus_chip * menelaus_hw)
{
- unsigned char reg;
+ int reg;
unsigned char card_mask = 0;
- reg = menelaus_read(MENELAUS_MCT_PIN_ST);
+ reg = menelaus_read_reg(MENELAUS_MCT_PIN_ST);
+ if (reg < 0)
+ return reg;
if (!(reg & 0x1))
card_mask |= (1 << 0);
if (!(reg & 0x2))
card_mask |= (1 << 1);
- if (menelaus->mmc_callback)
- menelaus->mmc_callback(menelaus->mmc_callback_data, card_mask);
+ if (menelaus_hw->mmc_callback)
+ menelaus_hw->mmc_callback(menelaus_hw->mmc_callback_data,
+ card_mask);
return 0;
}
/* Initializes MMC slots */
-void menelaus_mmc_register(void (*callback)(unsigned long data, u8 card_mask), unsigned long data)
+int menelaus_mmc_register(void (*callback)(unsigned long data, u8 card_mask),
+ unsigned long data)
{
- int reg;
+ int reg, ret = 0;
+
+ mutex_lock(&menelaus.lock);
/* DCDC3 to 3V */
- reg = menelaus_read(MENELAUS_DCDC_CTRL1);
+ reg = menelaus_read_reg(MENELAUS_DCDC_CTRL1);
+ if (reg < 0)
+ goto err_out;
reg |= 0x6 << 4;
- menelaus_write(reg, MENELAUS_DCDC_CTRL1);
+ ret = menelaus_write_reg(MENELAUS_DCDC_CTRL1, reg);
+ if (ret < 0)
+ goto err_out;
- reg = menelaus_read(MENELAUS_DCDC_CTRL3);
+ reg = menelaus_read_reg(MENELAUS_DCDC_CTRL3);
+ if (reg < 0)
+ goto err_out;
reg |= 0x6;
- menelaus_write(reg, MENELAUS_DCDC_CTRL3);
-
+ ret = menelaus_write_reg(MENELAUS_DCDC_CTRL3, reg);
+ if (ret < 0)
+ goto err_out;
+
/* Enable both slots, do not set auto shutdown */
- reg = menelaus_read(MENELAUS_MCT_CTRL3);
+ reg = menelaus_read_reg(MENELAUS_MCT_CTRL3);
+ if (reg < 0)
+ goto err_out;
reg |= 0x3;
- menelaus_write(reg, MENELAUS_MCT_CTRL3);
+ ret = menelaus_write_reg(MENELAUS_MCT_CTRL3, reg);
+ if (ret < 0)
+ goto err_out;
/* Enable card detect for both slots, slot 2 powered from DCDC3 */
- reg = menelaus_read(MENELAUS_MCT_CTRL2);
+ reg = menelaus_read_reg(MENELAUS_MCT_CTRL2);
+ if (reg < 0)
+ goto err_out;
reg |= 0xf0;
- menelaus_write(reg, MENELAUS_MCT_CTRL2);
+ ret = menelaus_write_reg(MENELAUS_MCT_CTRL2, reg);
+ if (ret < 0)
+ goto err_out;
/* Set both slots in open-drain mode, card detect normally closed */
- reg = menelaus_read(MENELAUS_MCT_CTRL1);
+ reg = menelaus_read_reg(MENELAUS_MCT_CTRL1);
+ if (reg < 0)
+ goto err_out;
reg |= 0xfc;
- menelaus_write(reg, MENELAUS_MCT_CTRL1);
+ ret = menelaus_write_reg(MENELAUS_MCT_CTRL1, reg);
+ if (ret < 0)
+ goto err_out;
/* Set MMC voltage */
- reg = menelaus_read(MENELAUS_LDO_CTRL7);
+ reg = menelaus_read_reg(MENELAUS_LDO_CTRL7);
+ if (reg < 0)
+ goto err_out;
reg |= 0x03;
- menelaus_write(reg, MENELAUS_LDO_CTRL7);
+ ret = menelaus_write_reg(MENELAUS_LDO_CTRL7, reg);
+ if (ret < 0)
+ goto err_out;
+
+ mutex_unlock(&menelaus.lock);
menelaus.mmc_callback_data = data;
menelaus.mmc_callback = callback;
- menelaus_add_irq_work(MENELAUS_MMC_S1CD_IRQ, menelaus_mmc_cd_work);
- menelaus_add_irq_work(MENELAUS_MMC_S2CD_IRQ, menelaus_mmc_cd_work);
- menelaus_add_irq_work(MENELAUS_MMC_S1D1_IRQ, menelaus_mmc_cd_work);
- menelaus_add_irq_work(MENELAUS_MMC_S2D1_IRQ, menelaus_mmc_cd_work);
+ ret = menelaus_add_irq_work(MENELAUS_MMC_S1CD_IRQ,
+ menelaus_mmc_cd_work);
+ if (ret < 0)
+ return ret;
+ ret = menelaus_add_irq_work(MENELAUS_MMC_S2CD_IRQ,
+ menelaus_mmc_cd_work);
+ if (ret < 0)
+ return ret;
+ ret = menelaus_add_irq_work(MENELAUS_MMC_S1D1_IRQ,
+ menelaus_mmc_cd_work);
+ if (ret < 0)
+ return ret;
+ ret = menelaus_add_irq_work(MENELAUS_MMC_S2D1_IRQ,
+ menelaus_mmc_cd_work);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+
+ err_out:
+ mutex_unlock(&menelaus.lock);
+ if (ret < 0)
+ return ret;
+ return reg;
}
EXPORT_SYMBOL(menelaus_mmc_register);
-void menelaus_mmc_remove(void)
+int menelaus_mmc_remove(void)
{
- menelaus_remove_irq_work(MENELAUS_MMC_S1CD_IRQ);
- menelaus_remove_irq_work(MENELAUS_MMC_S2CD_IRQ);
- menelaus_remove_irq_work(MENELAUS_MMC_S1D1_IRQ);
- menelaus_remove_irq_work(MENELAUS_MMC_S2D1_IRQ);
+ int ret;
+
+ ret = menelaus_remove_irq_work(MENELAUS_MMC_S1CD_IRQ);
+ if (ret < 0)
+ return ret;
+ ret = menelaus_remove_irq_work(MENELAUS_MMC_S2CD_IRQ);
+ if (ret < 0)
+ return ret;
+ ret = menelaus_remove_irq_work(MENELAUS_MMC_S1D1_IRQ);
+ if (ret < 0)
+ return ret;
+ ret = menelaus_remove_irq_work(MENELAUS_MMC_S2D1_IRQ);
+ if (ret < 0)
+ return ret;
menelaus.mmc_callback = NULL;
menelaus.mmc_callback_data = 0;
+ return 0;
+
/* FIXME: Shutdown MMC components of Menelaus */
}
EXPORT_SYMBOL(menelaus_mmc_remove);
+/*-----------------------------------------------------------------------*/
+int menelaus_set_vmem(unsigned int mV)
+{
+ int reg, ret;
+
+ if (!mV)
+ /* We turn it off here */
+ return menelaus_write_reg(MENELAUS_LDO_CTRL3, 0);
+
+ mutex_lock(&menelaus.lock);
+ reg = menelaus_read_reg(MENELAUS_LDO_CTRL1);
+
+ /* VMEM is on LDO_CTRL1, bits 0 and 1 */
+ reg &= 0xfffc;
+
+ switch(mV) {
+ case 1500:
+ break;
+ case 1800:
+ reg |= 0x1;
+ break;
+ case 2500:
+ reg |= 0x2;
+ break;
+ case 2800:
+ reg |= 0x3;
+ break;
+ default:
+ mutex_unlock(&menelaus.lock);
+ return -EINVAL;
+ }
+
+ ret = menelaus_write_reg(MENELAUS_LDO_CTRL1, reg);
+ if (ret == 0)
+ /* We turn it on */
+ ret = menelaus_write_reg(MENELAUS_LDO_CTRL3, 0x2);
+
+ mutex_unlock(&menelaus.lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(menelaus_set_vmem);
+
+int menelaus_set_vio(unsigned int mV)
+{
+ int reg, ret;
+
+ if (!mV)
+ /* We turn it off here */
+ return menelaus_write_reg(MENELAUS_LDO_CTRL4, 0);
+
+ mutex_lock(&menelaus.lock);
+ reg = menelaus_read_reg(MENELAUS_LDO_CTRL1);
+ if (reg < 0) {
+ mutex_unlock(&menelaus.lock);
+ return reg;
+ }
+
+ /* VIO is on LDO_CTRL1, bits 2 and 3 */
+ reg &= 0xfff3;
+
+ switch(mV) {
+ case 1500:
+ break;
+ case 1800:
+ reg |= (0x1 << 2);
+ break;
+ case 2500:
+ reg |= (0x2 << 2);
+ break;
+ case 2800:
+ reg |= (0x3 << 2);
+ break;
+ default:
+ mutex_unlock(&menelaus.lock);
+ return -EINVAL;
+ }
+
+ ret = menelaus_write_reg(MENELAUS_LDO_CTRL1, reg);
+ if (ret == 0)
+ /* We turn it on */
+ ret = menelaus_write_reg(MENELAUS_LDO_CTRL4, 0x2);
+
+ mutex_unlock(&menelaus.lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(menelaus_set_vio);
+
/*-----------------------------------------------------------------------*/
/* Handles Menelaus interrupts. Does not run in interrupt context */
{
struct menelaus_chip *menelaus = _menelaus;
int (*handler)(struct menelaus_chip *menelaus);
-
+
while (1) {
int i;
unsigned char isr;
- isr = menelaus_read(MENELAUS_INT_STATUS1) |
- (menelaus_read(MENELAUS_INT_STATUS2) << 8);
+ isr = menelaus_read_reg(MENELAUS_INT_STATUS1) |
+ (menelaus_read_reg(MENELAUS_INT_STATUS2) << 8);
if (!isr)
break;
}
/* If a true probe check the device */
- if (kind < 0 && (rev = menelaus_read(MENELAUS_REV)) < 0) {
+ if (kind < 0 && (rev = menelaus_read_reg(MENELAUS_REV)) < 0) {
pr_err("device not found");
err = -ENODEV;
goto fail2;