SRAM patcher: convert sram_ddr_init to use runtime SRAM patcher

Use the runtime SRAM patcher to set register addresses in
sram_ddr_init.  The long symbol names are intended to help
disambiguate the symbols, now that they are global.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S
index 95146452fd96d303567844045a3929a2f4a5adeb..58a75410ab1d4127bb79cfb88438274b1754d50b 100644 (file)
--- a/arch/arm/mach-omap2/sram-fn.S
+++ b/arch/arm/mach-omap2/sram-fn.S
@@ -26,6 +26,7 @@
 #include <asm/assembler.h>
 #include <asm/arch/io.h>
 #include <asm/hardware.h>
+#include <linux/poison.h>
 
 #define TIMER_32KSYNCT_CR_V    IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
 
@@ -48,7 +49,7 @@ ENTRY(sram_ddr_init)
        mov     r8, r3                  @ capture force parameter
 
        /* frequency shift down */
-       ldr     r2, cm_clksel2_pll      @ get address of dpllout reg
+       ldr     r2, omap2_sdi_cm_clksel2_pll    @ get address of dpllout reg
        mov     r3, #0x1                @ value for 1x operation
        str     r3, [r2]                @ go to L1-freq operation
 
@@ -57,7 +58,7 @@ ENTRY(sram_ddr_init)
        bl voltage_shift                @ go drop voltage
 
        /* dll lock mode */
-       ldr     r11, sdrc_dlla_ctrl     @ addr of dlla ctrl
+       ldr     r11, omap2_sdi_sdrc_dlla_ctrl   @ addr of dlla ctrl
        ldr     r10, [r11]              @ get current val
        cmp     r12, #0x1               @ cs1 base (2422 es2.05/1)
        addeq   r11, r11, #0x8          @ if cs1 base, move to DLLB
@@ -108,7 +109,7 @@ i_dll_delay:
         * wait for it to finish, use 32k sync counter, 1tick=31uS.
         */
 voltage_shift:
-       ldr     r4, prcm_voltctrl       @ get addr of volt ctrl.
+       ldr     r4, omap2_sdi_prcm_voltctrl     @ get addr of volt ctrl.
        ldr     r5, [r4]                @ get value.
        ldr     r6, prcm_mask_val       @ get value of mask
        and     r5, r5, r6              @ apply mask to clear bits
@@ -118,7 +119,7 @@ voltage_shift:
        orr     r5, r5, r3              @ build value for force
        str     r5, [r4]                @ Force transition to L1
 
-       ldr     r3, timer_32ksynct_cr   @ get addr of counter
+       ldr     r3, omap2_sdi_timer_32ksynct_cr @ get addr of counter
        ldr     r5, [r3]                @ get value
        add     r5, r5, #0x3            @ give it at most 93uS
 volt_delay:
@@ -128,16 +129,21 @@ volt_delay:
        mov     pc, lr                  @ back to caller.
 
 /* relative load constants */
-cm_clksel2_pll:
-       .word CM_CLKSEL2_PLL_V
-sdrc_dlla_ctrl:
-       .word SDRC_DLLA_CTRL_V
-prcm_voltctrl:
-       .word PRCM_VOLTCTRL_V
+       .globl omap2_sdi_cm_clksel2_pll
+       .globl omap2_sdi_sdrc_dlla_ctrl
+       .globl omap2_sdi_prcm_voltctrl
+       .globl omap2_sdi_timer_32ksynct_cr
+
+omap2_sdi_cm_clksel2_pll:
+       .word SRAM_VA_MAGIC
+omap2_sdi_sdrc_dlla_ctrl:
+       .word SRAM_VA_MAGIC
+omap2_sdi_prcm_voltctrl:
+       .word SRAM_VA_MAGIC
 prcm_mask_val:
        .word 0xFFFF3FFC
-timer_32ksynct_cr:
-       .word TIMER_32KSYNCT_CR_V
+omap2_sdi_timer_32ksynct_cr:
+       .word SRAM_VA_MAGIC
 ENTRY(sram_ddr_init_sz)
        .word   . - sram_ddr_init
 

diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index e6cfa11eb301273efc492747472907b836e29b76..040a106dca6b024cbfe67007ba67c1ae29e15157 100644 (file)
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -25,6 +25,12 @@
 #include <asm/arch/sram.h>
 #include <asm/arch/board.h>
 
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+# include "../mach-omap2/prm.h"
+# include "../mach-omap2/cm.h"
+# include "../mach-omap2/sdrc.h"
+#endif
+
 #define OMAP1_SRAM_PA          0x20000000
 #define OMAP1_SRAM_VA          0xd0000000
 #define OMAP2_SRAM_PA          0x40200000
@@ -58,6 +64,13 @@ extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
                                         unsigned long pstart_avail,
                                         unsigned long size_avail);
 
+/* Global symbols in sram-fn.S to be patched with omap_sram_patch_va() */
+extern void *omap2_sdi_cm_clksel2_pll;
+extern void *omap2_sdi_sdrc_dlla_ctrl;
+extern void *omap2_sdi_prcm_voltctrl;
+extern void *omap2_sdi_timer_32ksynct_cr;
+
+
 /*
  * Depending on the target RAMFS firewall setup, the public usable amount of
  * SRAM varies.  The default accessible size for all device types is 2k. A GP
@@ -325,6 +338,19 @@ int __init omap2_sram_init(void)
 {
        _omap2_sram_ddr_init = omap_sram_push(sram_ddr_init, sram_ddr_init_sz);
 
+       /* Patch in the correct register addresses for multiboot */
+       omap_sram_patch_va(sram_ddr_init, &omap2_sdi_cm_clksel2_pll,
+                          _omap2_sram_ddr_init,
+                          OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2));
+       omap_sram_patch_va(sram_ddr_init, &omap2_sdi_sdrc_dlla_ctrl,
+                          _omap2_sram_ddr_init,
+                          OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL));
+       omap_sram_patch_va(sram_ddr_init, &omap2_sdi_prcm_voltctrl,
+                          _omap2_sram_ddr_init, OMAP24XX_PRCM_VOLTCTRL);
+       omap_sram_patch_va(sram_ddr_init, &omap2_sdi_timer_32ksynct_cr,
+                          _omap2_sram_ddr_init,
+                          (void __iomem *)IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010));
+
        _omap2_sram_reprogram_sdrc = omap_sram_push(sram_reprogram_sdrc,
                                                    sram_reprogram_sdrc_sz);
        _omap2_set_prcm = omap_sram_push(sram_set_prcm, sram_set_prcm_sz);