]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
iwlwifi: improve scanning band selection management
authorRon Rindjunsky <ron.rindjunsky@intel.com>
Wed, 25 Jun 2008 08:46:31 +0000 (16:46 +0800)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 25 Jun 2008 14:57:03 +0000 (10:57 -0400)
This patch modifies the band selection management when scanning, so
bands are now scanned according to HW band support.

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/iwlwifi/iwl3945-base.c
drivers/net/wireless/iwlwifi/iwl4965-base.c

index 13925b627e3b5569f5ebaf1399f121dea3d489d2..b1b3c523185de39a2e5f38670cda26cf1aba6b17 100644 (file)
@@ -2227,7 +2227,10 @@ static int iwl3945_scan_initiate(struct iwl3945_priv *priv)
        }
 
        IWL_DEBUG_INFO("Starting scan...\n");
-       priv->scan_bands = 2;
+       if (priv->cfg->sku & IWL_SKU_G)
+               priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+       if (priv->cfg->sku & IWL_SKU_A)
+               priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
        set_bit(STATUS_SCANNING, &priv->status);
        priv->scan_start = jiffies;
        priv->scan_pass_start = priv->scan_start;
@@ -3352,13 +3355,18 @@ static void iwl3945_rx_scan_complete_notif(struct iwl3945_priv *priv,
        cancel_delayed_work(&priv->scan_check);
 
        IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
-                      (priv->scan_bands == 2) ? "2.4" : "5.2",
+                      (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
+                                                       "2.4" : "5.2",
                       jiffies_to_msecs(elapsed_jiffies
                                        (priv->scan_pass_start, jiffies)));
 
-       /* Remove this scanned band from the list
-        * of pending bands to scan */
-       priv->scan_bands--;
+       /* Remove this scanned band from the list of pending
+        * bands to scan, band G precedes A in order of scanning
+        * as seen in iwl3945_bg_request_scan */
+       if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
+               priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
+       else if (priv->scan_bands &  BIT(IEEE80211_BAND_5GHZ))
+               priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
 
        /* If a request to abort was given, or the scan did not succeed
         * then we reset the scan state machine and terminate,
@@ -4972,7 +4980,7 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
 
                ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel);
                if (!is_channel_valid(ch_info)) {
-                       IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+                       IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
                                       scan_ch->channel);
                        continue;
                }
@@ -6315,21 +6323,16 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 
        /* flags + rate selection */
 
-       switch (priv->scan_bands) {
-       case 2:
+       if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
                scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
                scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
                scan->good_CRC_th = 0;
                band = IEEE80211_BAND_2GHZ;
-               break;
-
-       case 1:
+       } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
                scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
                scan->good_CRC_th = IWL_GOOD_CRC_TH;
                band = IEEE80211_BAND_5GHZ;
-               break;
-
-       default:
+       } else {
                IWL_WARNING("Invalid scan band count\n");
                goto done;
        }
@@ -6770,7 +6773,7 @@ static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co
        ch_info = iwl3945_get_channel_info(priv, conf->channel->band,
                                           conf->channel->hw_value);
        if (!is_channel_valid(ch_info)) {
-               IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this SKU.\n",
+               IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this band.\n",
                               conf->channel->hw_value, conf->channel->band);
                IWL_DEBUG_MAC80211("leave - invalid channel\n");
                spin_unlock_irqrestore(&priv->lock, flags);
index 883b42f7e9989dff95e085cf6afb6577eb9f7f1a..5ed16ce784689b9c1439d4fe96a98bd032a03e3f 100644 (file)
@@ -1774,7 +1774,10 @@ static int iwl4965_scan_initiate(struct iwl_priv *priv)
        }
 
        IWL_DEBUG_INFO("Starting scan...\n");
-       priv->scan_bands = 2;
+       if (priv->cfg->sku & IWL_SKU_G)
+               priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+       if (priv->cfg->sku & IWL_SKU_A)
+               priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
        set_bit(STATUS_SCANNING, &priv->status);
        priv->scan_start = jiffies;
        priv->scan_pass_start = priv->scan_start;
@@ -3023,8 +3026,9 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 
        IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index);
        if (index != -1) {
-               int freed = iwl4965_tx_queue_reclaim(priv, txq_id, index);
 #ifdef CONFIG_IWL4965_HT
+               int freed = iwl4965_tx_queue_reclaim(priv, txq_id, index);
+
                if (tid != MAX_TID_COUNT)
                        priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
                if (iwl4965_queue_space(&txq->q) > txq->q.low_mark &&
@@ -3276,13 +3280,18 @@ static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv,
        cancel_delayed_work(&priv->scan_check);
 
        IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
-                      (priv->scan_bands == 2) ? "2.4" : "5.2",
+                      (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
+                                               "2.4" : "5.2",
                       jiffies_to_msecs(elapsed_jiffies
                                        (priv->scan_pass_start, jiffies)));
 
-       /* Remove this scanned band from the list
-        * of pending bands to scan */
-       priv->scan_bands--;
+       /* Remove this scanned band from the list of pending
+        * bands to scan, band G precedes A in order of scanning
+        * as seen in iwl_bg_request_scan */
+       if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
+               priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
+       else if (priv->scan_bands &  BIT(IEEE80211_BAND_5GHZ))
+               priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
 
        /* If a request to abort was given, or the scan did not succeed
         * then we reset the scan state machine and terminate,
@@ -3292,7 +3301,7 @@ static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv,
                clear_bit(STATUS_SCAN_ABORTING, &priv->status);
        } else {
                /* If there are more bands on this scan pass reschedule */
-               if (priv->scan_bands > 0)
+               if (priv->scan_bands)
                        goto reschedule;
        }
 
@@ -4635,10 +4644,9 @@ static int iwl4965_get_channels_for_scan(struct iwl_priv *priv,
 
                scan_ch->channel = ieee80211_frequency_to_channel(channels[i].center_freq);
 
-               ch_info = iwl_get_channel_info(priv, band,
-                                        scan_ch->channel);
+               ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
                if (!is_channel_valid(ch_info)) {
-                       IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+                       IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
                                       scan_ch->channel);
                        continue;
                }
@@ -5830,8 +5838,7 @@ static void iwl4965_bg_request_scan(struct work_struct *data)
        scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 
 
-       switch (priv->scan_bands) {
-       case 2:
+       if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
                scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
                scan->tx_cmd.rate_n_flags =
                                iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP,
@@ -5839,17 +5846,13 @@ static void iwl4965_bg_request_scan(struct work_struct *data)
 
                scan->good_CRC_th = 0;
                band = IEEE80211_BAND_2GHZ;
-               break;
-
-       case 1:
+       } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
                scan->tx_cmd.rate_n_flags =
                                iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP,
                                RATE_MCS_ANT_B_MSK);
                scan->good_CRC_th = IWL_GOOD_CRC_TH;
                band = IEEE80211_BAND_5GHZ;
-               break;
-
-       default:
+       } else {
                IWL_WARNING("Invalid scan band count\n");
                goto done;
        }