]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
scc_pata: add ->dma_host_set and ->dma_start methods
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Mon, 28 Apr 2008 21:44:41 +0000 (23:44 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Mon, 28 Apr 2008 21:44:41 +0000 (23:44 +0200)
Add ->dma_host_set and ->dma_start methods (+ __scc_dma_end() helper)
so scc_ide_{in,out}b() can be used directly.

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/pci/scc_pata.c

index a17f73ec577a48133f7c76d68c2d729085bb1b74..1449381883250b9df5a3199407275ddd623ceaa7 100644 (file)
@@ -260,6 +260,20 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
        out_be32((void __iomem *)udenvt_port, reg);
 }
 
+static void scc_dma_host_set(ide_drive_t *drive, int on)
+{
+       ide_hwif_t *hwif = drive->hwif;
+       u8 unit = (drive->select.b.unit & 0x01);
+       u8 dma_stat = scc_ide_inb(hwif->dma_status);
+
+       if (on)
+               dma_stat |= (1 << (5 + unit));
+       else
+               dma_stat &= ~(1 << (5 + unit));
+
+       scc_ide_outb(dma_stat, hwif->dma_status);
+}
+
 /**
  *     scc_ide_dma_setup       -       begin a DMA phase
  *     @drive: target device
@@ -304,13 +318,45 @@ static int scc_dma_setup(ide_drive_t *drive)
        return 0;
 }
 
+static void scc_dma_start(ide_drive_t *drive)
+{
+       ide_hwif_t *hwif = drive->hwif;
+       u8 dma_cmd = scc_ide_inb(hwif->dma_command);
+
+       /* start DMA */
+       scc_ide_outb(dma_cmd | 1, hwif->dma_command);
+       hwif->dma = 1;
+       wmb();
+}
+
+static int __scc_dma_end(ide_drive_t *drive)
+{
+       ide_hwif_t *hwif = drive->hwif;
+       u8 dma_stat, dma_cmd;
+
+       drive->waiting_for_dma = 0;
+       /* get DMA command mode */
+       dma_cmd = scc_ide_inb(hwif->dma_command);
+       /* stop DMA */
+       scc_ide_outb(dma_cmd & ~1, hwif->dma_command);
+       /* get DMA status */
+       dma_stat = scc_ide_inb(hwif->dma_status);
+       /* clear the INTR & ERROR bits */
+       scc_ide_outb(dma_stat | 6, hwif->dma_status);
+       /* purge DMA mappings */
+       ide_destroy_dmatable(drive);
+       /* verify good DMA status */
+       hwif->dma = 0;
+       wmb();
+       return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
+}
 
 /**
  *     scc_dma_end     -       Stop DMA
  *     @drive: IDE drive
  *
  *     Check and clear INT Status register.
- *      Then call __ide_dma_end().
+ *     Then call __scc_dma_end().
  */
 
 static int scc_dma_end(ide_drive_t *drive)
@@ -414,7 +460,7 @@ static int scc_dma_end(ide_drive_t *drive)
                break;
        }
 
-       dma_stat = __ide_dma_end(drive);
+       dma_stat = __scc_dma_end(drive);
        if (data_loss)
                dma_stat |= 2; /* emulate DMA error (to retry command) */
        return dma_stat;
@@ -811,10 +857,10 @@ static const struct ide_port_ops scc_port_ops = {
 };
 
 static const struct ide_dma_ops scc_dma_ops = {
-       .dma_host_set           = ide_dma_host_set,
+       .dma_host_set           = scc_dma_host_set,
        .dma_setup              = scc_dma_setup,
        .dma_exec_cmd           = ide_dma_exec_cmd,
-       .dma_start              = ide_dma_start,
+       .dma_start              = scc_dma_start,
        .dma_end                = scc_dma_end,
        .dma_test_irq           = scc_dma_test_irq,
        .dma_lost_irq           = ide_dma_lost_irq,