]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] add Marvell Kirkwood (88F6000) SoC support
authorSaeed Bishara <saeed@marvell.com>
Sun, 22 Jun 2008 20:45:06 +0000 (22:45 +0200)
committerLennert Buytenhek <buytenh@marvell.com>
Sun, 22 Jun 2008 20:45:06 +0000 (22:45 +0200)
The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a
Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface,
a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS
interface, and IDMA/XOR engines, and depending on the model, also
features one or two Gigabit Ethernet interfaces, two SATA II
interfaces, one or two TWSI interfaces, one or two UARTs, a
TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and
an SDIO interface.

This patch adds supports for the Marvell DB-88F6281-BP Development
Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs,
enabling support for the PCIe interface, the USB interface, the
ethernet interfaces, the SATA interfaces, the TWSI interfaces, the
UARTs, and the NAND controller.

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
26 files changed:
arch/arm/Kconfig
arch/arm/Makefile
arch/arm/mach-kirkwood/Kconfig [new file with mode: 0644]
arch/arm/mach-kirkwood/Makefile [new file with mode: 0644]
arch/arm/mach-kirkwood/Makefile.boot [new file with mode: 0644]
arch/arm/mach-kirkwood/addr-map.c [new file with mode: 0644]
arch/arm/mach-kirkwood/common.c [new file with mode: 0644]
arch/arm/mach-kirkwood/common.h [new file with mode: 0644]
arch/arm/mach-kirkwood/db88f6281-bp-setup.c [new file with mode: 0644]
arch/arm/mach-kirkwood/irq.c [new file with mode: 0644]
arch/arm/mach-kirkwood/pcie.c [new file with mode: 0644]
arch/arm/mach-kirkwood/rd88f6192-nas-setup.c [new file with mode: 0644]
arch/arm/mach-kirkwood/rd88f6281-setup.c [new file with mode: 0644]
arch/arm/mm/Kconfig
include/asm-arm/arch-kirkwood/debug-macro.S [new file with mode: 0644]
include/asm-arm/arch-kirkwood/dma.h [new file with mode: 0644]
include/asm-arm/arch-kirkwood/entry-macro.S [new file with mode: 0644]
include/asm-arm/arch-kirkwood/hardware.h [new file with mode: 0644]
include/asm-arm/arch-kirkwood/io.h [new file with mode: 0644]
include/asm-arm/arch-kirkwood/irqs.h [new file with mode: 0644]
include/asm-arm/arch-kirkwood/kirkwood.h [new file with mode: 0644]
include/asm-arm/arch-kirkwood/memory.h [new file with mode: 0644]
include/asm-arm/arch-kirkwood/system.h [new file with mode: 0644]
include/asm-arm/arch-kirkwood/timex.h [new file with mode: 0644]
include/asm-arm/arch-kirkwood/uncompress.h [new file with mode: 0644]
include/asm-arm/arch-kirkwood/vmalloc.h [new file with mode: 0644]

index 7a725f89b8436ed03068fa47035f9adecbb6f570..3535cae73d242eadbfcdf7486ce6494a1ef2e801 100644 (file)
@@ -352,6 +352,16 @@ config ARCH_L7200
          If you have any questions or comments about the Linux kernel port
          to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_KIRKWOOD
+       bool "Marvell Kirkwood"
+       select PCI
+       select GENERIC_TIME
+       select GENERIC_CLOCKEVENTS
+       select PLAT_ORION
+       help
+         Support for the following Marvell Kirkwood series SoCs:
+         88F6180, 88F6192 and 88F6281.
+
 config ARCH_KS8695
        bool "Micrel/Kendin KS8695"
        select GENERIC_GPIO
@@ -530,6 +540,8 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
+source "arch/arm/mach-kirkwood/Kconfig"
+
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
 
index 2ea32a70c977d2a766d00e35349d7d02fb6d7483..1459b3849c8c24b7c998e84876d1a4767bbc5757 100644 (file)
@@ -135,6 +135,7 @@ endif
  machine-$(CONFIG_ARCH_NETX)      := netx
  machine-$(CONFIG_ARCH_NS9XXX)    := ns9xxx
  machine-$(CONFIG_ARCH_DAVINCI)           := davinci
+ machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
   incdir-$(CONFIG_ARCH_MXC)       := mxc
  machine-$(CONFIG_ARCH_MX3)       := mx3
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
new file mode 100644 (file)
index 0000000..3600cd9
--- /dev/null
@@ -0,0 +1,25 @@
+if ARCH_KIRKWOOD
+
+menu "Marvell Kirkwood Implementations"
+
+config MACH_DB88F6281_BP
+       bool "Marvell DB-88F6281-BP Development Board"
+       help
+         Say 'Y' here if you want your kernel to support the
+         Marvell DB-88F6281-BP Development Board.
+
+config MACH_RD88F6192_NAS
+       bool "Marvell RD-88F6192-NAS Reference Board"
+       help
+         Say 'Y' here if you want your kernel to support the
+         Marvell RD-88F6192-NAS Reference Board.
+
+config MACH_RD88F6281
+       bool "Marvell RD-88F6281 Reference Board"
+       help
+         Say 'Y' here if you want your kernel to support the
+         Marvell RD-88F6281 Reference Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
new file mode 100644 (file)
index 0000000..e14bf40
--- /dev/null
@@ -0,0 +1,5 @@
+obj-y                          += common.o addr-map.o irq.o pcie.o
+
+obj-$(CONFIG_MACH_DB88F6281_BP)                += db88f6281-bp-setup.o
+obj-$(CONFIG_MACH_RD88F6192_NAS)       += rd88f6192-nas-setup.o
+obj-$(CONFIG_MACH_RD88F6192_NAS)       += rd88f6281-setup.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
new file mode 100644 (file)
index 0000000..67039c3
--- /dev/null
@@ -0,0 +1,3 @@
+   zreladdr-y  := 0x00008000
+params_phys-y  := 0x00000100
+initrd_phys-y  := 0x00800000
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
new file mode 100644 (file)
index 0000000..a39f0f3
--- /dev/null
@@ -0,0 +1,139 @@
+/*
+ * arch/arm/mach-kirkwood/addr-map.c
+ *
+ * Address map functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/hardware.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR             0
+#define TARGET_DEV_BUS         1
+#define TARGET_PCIE            4
+#define ATTR_DEV_SPI_ROM       0x1e
+#define ATTR_DEV_BOOT          0x1d
+#define ATTR_DEV_NAND          0x2f
+#define ATTR_DEV_CS3           0x37
+#define ATTR_DEV_CS2           0x3b
+#define ATTR_DEV_CS1           0x3d
+#define ATTR_DEV_CS0           0x3e
+#define ATTR_PCIE_IO           0xe0
+#define ATTR_PCIE_MEM          0xe8
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_BASE_CS_OFF(n)     (0x0000 + ((n) << 3))
+#define DDR_SIZE_CS_OFF(n)     (0x0004 + ((n) << 3))
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_OFF(n)             (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
+#define WIN_CTRL_OFF           0x0000
+#define WIN_BASE_OFF           0x0004
+#define WIN_REMAP_LO_OFF       0x0008
+#define WIN_REMAP_HI_OFF       0x000c
+
+
+struct mbus_dram_target_info kirkwood_mbus_dram_info;
+
+static int __init cpu_win_can_remap(int win)
+{
+       if (win < 4)
+               return 1;
+
+       return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+                                u8 target, u8 attr, int remap)
+{
+       void __iomem *addr = (void __iomem *)WIN_OFF(win);
+       u32 ctrl;
+
+       base &= 0xffff0000;
+       ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+       writel(base, addr + WIN_BASE_OFF);
+       writel(ctrl, addr + WIN_CTRL_OFF);
+       if (cpu_win_can_remap(win)) {
+               if (remap < 0)
+                       remap = base;
+
+               writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
+               writel(0, addr + WIN_REMAP_HI_OFF);
+       }
+}
+
+void __init kirkwood_setup_cpu_mbus(void)
+{
+       void __iomem *addr;
+       int i;
+       int cs;
+
+       /*
+        * First, disable and clear windows.
+        */
+       for (i = 0; i < 8; i++) {
+               addr = (void __iomem *)WIN_OFF(i);
+
+               writel(0, addr + WIN_BASE_OFF);
+               writel(0, addr + WIN_CTRL_OFF);
+               if (cpu_win_can_remap(i)) {
+                       writel(0, addr + WIN_REMAP_LO_OFF);
+                       writel(0, addr + WIN_REMAP_HI_OFF);
+               }
+       }
+
+       /*
+        * Setup windows for PCIe IO+MEM space.
+        */
+       setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
+                     TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
+       setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
+                     TARGET_PCIE, ATTR_PCIE_MEM, -1);
+
+       /*
+        * Setup window for NAND controller.
+        */
+       setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
+                     TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
+
+       /*
+        * Setup MBUS dram target info.
+        */
+       kirkwood_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+       addr = (void __iomem *)DDR_WINDOW_CPU_BASE;
+
+       for (i = 0, cs = 0; i < 4; i++) {
+               u32 base = readl(addr + DDR_BASE_CS_OFF(i));
+               u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
+
+               /*
+                * Chip select enabled?
+                */
+               if (size & 1) {
+                       struct mbus_dram_window *w;
+
+                       w = &kirkwood_mbus_dram_info.cs[cs++];
+                       w->cs_index = i;
+                       w->mbus_attr = 0xf & ~(1 << i);
+                       w->base = base & 0xffff0000;
+                       w->size = (size | 0x0000ffff) + 1;
+               }
+       }
+       kirkwood_mbus_dram_info.num_cs = cs;
+}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
new file mode 100644 (file)
index 0000000..e73384f
--- /dev/null
@@ -0,0 +1,326 @@
+/*
+ * arch/arm/mach-kirkwood/common.c
+ *
+ * Core functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <asm/page.h>
+#include <asm/timex.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/plat-orion/cache-feroceon-l2.h>
+#include <asm/plat-orion/ehci-orion.h>
+#include <asm/plat-orion/orion_nand.h>
+#include <asm/plat-orion/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc kirkwood_io_desc[] __initdata = {
+       {
+               .virtual        = KIRKWOOD_PCIE_IO_VIRT_BASE,
+               .pfn            = __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
+               .length         = KIRKWOOD_PCIE_IO_SIZE,
+               .type           = MT_DEVICE,
+       }, {
+               .virtual        = KIRKWOOD_REGS_VIRT_BASE,
+               .pfn            = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
+               .length         = KIRKWOOD_REGS_SIZE,
+               .type           = MT_DEVICE,
+       },
+};
+
+void __init kirkwood_map_io(void)
+{
+       iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
+}
+
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data kirkwood_ehci_data = {
+       .dram           = &kirkwood_mbus_dram_info,
+};
+
+static u64 ehci_dmamask = 0xffffffffUL;
+
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource kirkwood_ehci_resources[] = {
+       {
+               .start  = USB_PHYS_BASE,
+               .end    = USB_PHYS_BASE + 0x0fff,
+               .flags  = IORESOURCE_MEM,
+       }, {
+               .start  = IRQ_KIRKWOOD_USB,
+               .end    = IRQ_KIRKWOOD_USB,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device kirkwood_ehci = {
+       .name           = "orion-ehci",
+       .id             = 0,
+       .dev            = {
+               .dma_mask               = &ehci_dmamask,
+               .coherent_dma_mask      = 0xffffffff,
+               .platform_data          = &kirkwood_ehci_data,
+       },
+       .resource       = kirkwood_ehci_resources,
+       .num_resources  = ARRAY_SIZE(kirkwood_ehci_resources),
+};
+
+void __init kirkwood_ehci_init(void)
+{
+       platform_device_register(&kirkwood_ehci);
+}
+
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data kirkwood_ge00_shared_data = {
+       .t_clk          = KIRKWOOD_TCLK,
+       .dram           = &kirkwood_mbus_dram_info,
+};
+
+static struct resource kirkwood_ge00_shared_resources[] = {
+       {
+               .name   = "ge00 base",
+               .start  = GE00_PHYS_BASE + 0x2000,
+               .end    = GE00_PHYS_BASE + 0x3fff,
+               .flags  = IORESOURCE_MEM,
+       },
+};
+
+static struct platform_device kirkwood_ge00_shared = {
+       .name           = MV643XX_ETH_SHARED_NAME,
+       .id             = 0,
+       .dev            = {
+               .platform_data  = &kirkwood_ge00_shared_data,
+       },
+       .num_resources  = 1,
+       .resource       = kirkwood_ge00_shared_resources,
+};
+
+static struct resource kirkwood_ge00_resources[] = {
+       {
+               .name   = "ge00 irq",
+               .start  = IRQ_KIRKWOOD_GE00_SUM,
+               .end    = IRQ_KIRKWOOD_GE00_SUM,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device kirkwood_ge00 = {
+       .name           = MV643XX_ETH_NAME,
+       .id             = 0,
+       .num_resources  = 1,
+       .resource       = kirkwood_ge00_resources,
+};
+
+void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+       eth_data->shared = &kirkwood_ge00_shared;
+       kirkwood_ge00.dev.platform_data = eth_data;
+
+       platform_device_register(&kirkwood_ge00_shared);
+       platform_device_register(&kirkwood_ge00);
+}
+
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static struct resource kirkwood_rtc_resource = {
+       .start  = RTC_PHYS_BASE,
+       .end    = RTC_PHYS_BASE + SZ_16 - 1,
+       .flags  = IORESOURCE_MEM,
+};
+
+void __init kirkwood_rtc_init(void)
+{
+       platform_device_register_simple("rtc-mv", -1, &kirkwood_rtc_resource, 1);
+}
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource kirkwood_sata_resources[] = {
+       {
+               .name   = "sata base",
+               .start  = SATA_PHYS_BASE,
+               .end    = SATA_PHYS_BASE + 0x5000 - 1,
+               .flags  = IORESOURCE_MEM,
+       }, {
+               .name   = "sata irq",
+               .start  = IRQ_KIRKWOOD_SATA,
+               .end    = IRQ_KIRKWOOD_SATA,
+               .flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device kirkwood_sata = {
+       .name           = "sata_mv",
+       .id             = 0,
+       .dev            = {
+               .coherent_dma_mask      = 0xffffffff,
+       },
+       .num_resources  = ARRAY_SIZE(kirkwood_sata_resources),
+       .resource       = kirkwood_sata_resources,
+};
+
+void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
+{
+       sata_data->dram = &kirkwood_mbus_dram_info;
+       kirkwood_sata.dev.platform_data = sata_data;
+       platform_device_register(&kirkwood_sata);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port kirkwood_uart0_data[] = {
+       {
+               .mapbase        = UART0_PHYS_BASE,
+               .membase        = (char *)UART0_VIRT_BASE,
+               .irq            = IRQ_KIRKWOOD_UART_0,
+               .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+               .iotype         = UPIO_MEM,
+               .regshift       = 2,
+               .uartclk        = KIRKWOOD_TCLK,
+       }, {
+       },
+};
+
+static struct resource kirkwood_uart0_resources[] = {
+       {
+               .start          = UART0_PHYS_BASE,
+               .end            = UART0_PHYS_BASE + 0xff,
+               .flags          = IORESOURCE_MEM,
+       }, {
+               .start          = IRQ_KIRKWOOD_UART_0,
+               .end            = IRQ_KIRKWOOD_UART_0,
+               .flags          = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device kirkwood_uart0 = {
+       .name                   = "serial8250",
+       .id                     = 0,
+       .dev                    = {
+               .platform_data  = kirkwood_uart0_data,
+       },
+       .resource               = kirkwood_uart0_resources,
+       .num_resources          = ARRAY_SIZE(kirkwood_uart0_resources),
+};
+
+void __init kirkwood_uart0_init(void)
+{
+       platform_device_register(&kirkwood_uart0);
+}
+
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port kirkwood_uart1_data[] = {
+       {
+               .mapbase        = UART1_PHYS_BASE,
+               .membase        = (char *)UART1_VIRT_BASE,
+               .irq            = IRQ_KIRKWOOD_UART_1,
+               .flags          = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+               .iotype         = UPIO_MEM,
+               .regshift       = 2,
+               .uartclk        = KIRKWOOD_TCLK,
+       }, {
+       },
+};
+
+static struct resource kirkwood_uart1_resources[] = {
+       {
+               .start          = UART1_PHYS_BASE,
+               .end            = UART1_PHYS_BASE + 0xff,
+               .flags          = IORESOURCE_MEM,
+       }, {
+               .start          = IRQ_KIRKWOOD_UART_1,
+               .end            = IRQ_KIRKWOOD_UART_1,
+               .flags          = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device kirkwood_uart1 = {
+       .name                   = "serial8250",
+       .id                     = 1,
+       .dev                    = {
+               .platform_data  = kirkwood_uart1_data,
+       },
+       .resource               = kirkwood_uart1_resources,
+       .num_resources          = ARRAY_SIZE(kirkwood_uart1_resources),
+};
+
+void __init kirkwood_uart1_init(void)
+{
+       platform_device_register(&kirkwood_uart1);
+}
+
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static void kirkwood_timer_init(void)
+{
+       orion_time_init(IRQ_KIRKWOOD_BRIDGE, KIRKWOOD_TCLK);
+}
+
+struct sys_timer kirkwood_timer = {
+       .init = kirkwood_timer_init,
+};
+
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+static char * __init kirkwood_id(void)
+{
+       switch (readl(DEVICE_ID) & 0x3) {
+       case 0:
+               return "88F6180";
+       case 1:
+               return "88F6192";
+       case 2:
+               return "88F6281";
+       }
+
+       return "unknown 88F6000 variant";
+}
+
+void __init kirkwood_init(void)
+{
+       printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
+               kirkwood_id(), KIRKWOOD_TCLK);
+
+       kirkwood_setup_cpu_mbus();
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+       feroceon_l2_init(1);
+#endif
+}
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
new file mode 100644 (file)
index 0000000..5dee2f6
--- /dev/null
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-kirkwood/common.h
+ *
+ * Core functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_COMMON_H
+#define __ARCH_KIRKWOOD_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+/*
+ * Basic Kirkwood init functions used early by machine-setup.
+ */
+void kirkwood_map_io(void);
+void kirkwood_init(void);
+void kirkwood_init_irq(void);
+
+extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
+void kirkwood_setup_cpu_mbus(void);
+void kirkwood_setup_pcie_io_win(int window, u32 base, u32 size,
+                               int maj, int min);
+void kirkwood_setup_pcie_mem_win(int window, u32 base, u32 size,
+                                int maj, int min);
+
+void kirkwood_ehci_init(void);
+void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void kirkwood_pcie_init(void);
+void kirkwood_rtc_init(void);
+void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_uart0_init(void);
+void kirkwood_uart1_init(void);
+
+extern struct sys_timer kirkwood_timer;
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
new file mode 100644 (file)
index 0000000..d5c482c
--- /dev/null
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+ *
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/kirkwood.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
+       .phy_addr       = 8,
+};
+
+static struct mv_sata_platform_data db88f6281_sata_data = {
+       .n_ports        = 2,
+};
+
+static void __init db88f6281_init(void)
+{
+       /*
+        * Basic setup. Needs to be called early.
+        */
+       kirkwood_init();
+
+       kirkwood_ehci_init();
+       kirkwood_ge00_init(&db88f6281_ge00_data);
+       kirkwood_rtc_init();
+       kirkwood_sata_init(&db88f6281_sata_data);
+       kirkwood_uart0_init();
+       kirkwood_uart1_init();
+}
+
+static int __init db88f6281_pci_init(void)
+{
+       if (machine_is_db88f6281_bp())
+               kirkwood_pcie_init();
+
+       return 0;
+}
+subsys_initcall(db88f6281_pci_init);
+
+MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
+       /* Maintainer: Saeed Bishara <saeed@marvell.com> */
+       .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+       .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
+       .init_machine   = db88f6281_init,
+       .map_io         = kirkwood_map_io,
+       .init_irq       = kirkwood_init_irq,
+       .timer          = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
new file mode 100644 (file)
index 0000000..302bb2c
--- /dev/null
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-kirkwood/irq.c
+ *
+ * Kirkwood IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/plat-orion/irq.h>
+#include "common.h"
+
+void __init kirkwood_init_irq(void)
+{
+       orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+       orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+}
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
new file mode 100644 (file)
index 0000000..8282d0f
--- /dev/null
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-kirkwood/pcie.c
+ *
+ * PCIe functions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/plat-orion/pcie.h>
+#include "common.h"
+
+
+#define PCIE_BASE      ((void __iomem *)PCIE_VIRT_BASE)
+
+static int pcie_valid_config(int bus, int dev)
+{
+       /*
+        * Don't go out when trying to access --
+        * 1. nonexisting device on local bus
+        * 2. where there's no device connected (no link)
+        */
+       if (bus == 0 && dev == 0)
+               return 1;
+
+       if (!orion_pcie_link_up(PCIE_BASE))
+               return 0;
+
+       if (bus == 0 && dev != 1)
+               return 0;
+
+       return 1;
+}
+
+
+/*
+ * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
+ * and then reading the PCIE_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(kirkwood_pcie_lock);
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+                       int size, u32 *val)
+{
+       unsigned long flags;
+       int ret;
+
+       if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+               *val = 0xffffffff;
+               return PCIBIOS_DEVICE_NOT_FOUND;
+       }
+
+       spin_lock_irqsave(&kirkwood_pcie_lock, flags);
+       ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
+       spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+
+       return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+                       int where, int size, u32 val)
+{
+       unsigned long flags;
+       int ret;
+
+       if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
+               return PCIBIOS_DEVICE_NOT_FOUND;
+
+       spin_lock_irqsave(&kirkwood_pcie_lock, flags);
+       ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
+       spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+
+       return ret;
+}
+
+static struct pci_ops pcie_ops = {
+       .read = pcie_rd_conf,
+       .write = pcie_wr_conf,
+};
+
+
+static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+       struct resource *res;
+
+       /*
+        * Generic PCIe unit setup.
+        */
+       orion_pcie_setup(PCIE_BASE, &kirkwood_mbus_dram_info);
+
+       /*
+        * Request resources.
+        */
+       res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+       if (!res)
+               panic("pcie_setup unable to alloc resources");
+
+       /*
+        * IORESOURCE_IO
+        */
+       res[0].name = "PCIe I/O Space";
+       res[0].flags = IORESOURCE_IO;
+       res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+       res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
+       if (request_resource(&ioport_resource, &res[0]))
+               panic("Request PCIe IO resource failed\n");
+       sys->resource[0] = &res[0];
+
+       /*
+        * IORESOURCE_MEM
+        */
+       res[1].name = "PCIe Memory Space";
+       res[1].flags = IORESOURCE_MEM;
+       res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+       res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+       if (request_resource(&iomem_resource, &res[1]))
+               panic("Request PCIe Memory resource failed\n");
+       sys->resource[1] = &res[1];
+
+       sys->resource[2] = NULL;
+       sys->io_offset = 0;
+
+       return 1;
+}
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+       /*
+        * Prevent enumeration of root complex.
+        */
+       if (dev->bus->parent == NULL && dev->devfn == 0) {
+               int i;
+
+               for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+                       dev->resource[i].start = 0;
+                       dev->resource[i].end   = 0;
+                       dev->resource[i].flags = 0;
+               }
+       }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+       struct pci_bus *bus;
+
+       if (nr == 0) {
+               bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+       } else {
+               bus = NULL;
+               BUG();
+       }
+
+       return bus;
+}
+
+static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+       return IRQ_KIRKWOOD_PCIE;
+}
+
+static struct hw_pci kirkwood_pci __initdata = {
+       .nr_controllers = 1,
+       .swizzle        = pci_std_swizzle,
+       .setup          = kirkwood_pcie_setup,
+       .scan           = kirkwood_pcie_scan_bus,
+       .map_irq        = kirkwood_pcie_map_irq,
+};
+
+void __init kirkwood_pcie_init(void)
+{
+       pci_common_init(&kirkwood_pci);
+}
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
new file mode 100644 (file)
index 0000000..6cf642c
--- /dev/null
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+ *
+ * Marvell RD-88F6192-NAS Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/kirkwood.h>
+#include "common.h"
+
+#define RD88F6192_GPIO_USB_VBUS                10
+
+static struct mv643xx_eth_platform_data rd88f6192_ge00_data = {
+       .phy_addr       = 8,
+};
+
+static struct mv_sata_platform_data rd88f6192_sata_data = {
+       .n_ports        = 2,
+};
+
+static void __init rd88f6192_init(void)
+{
+       /*
+        * Basic setup. Needs to be called early.
+        */
+       kirkwood_init();
+
+       kirkwood_ehci_init();
+       kirkwood_ge00_init(&rd88f6192_ge00_data);
+       kirkwood_rtc_init();
+       kirkwood_sata_init(&rd88f6192_sata_data);
+       kirkwood_uart0_init();
+}
+
+static int __init rd88f6192_pci_init(void)
+{
+       if (machine_is_rd88f6192_nas())
+               kirkwood_pcie_init();
+
+       return 0;
+}
+subsys_initcall(rd88f6192_pci_init);
+
+MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
+       /* Maintainer: Saeed Bishara <saeed@marvell.com> */
+       .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+       .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
+       .init_machine   = rd88f6192_init,
+       .map_io         = kirkwood_map_io,
+       .init_irq       = kirkwood_init_irq,
+       .timer          = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
new file mode 100644 (file)
index 0000000..fe8b242
--- /dev/null
@@ -0,0 +1,112 @@
+/*
+ * arch/arm/mach-kirkwood/rd88f6281-setup.c
+ *
+ * Marvell RD-88F6281 Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/plat-orion/orion_nand.h>
+#include "common.h"
+
+static struct mtd_partition rd88f6281_nand_parts[] = {
+       {
+               .name = "u-boot",
+               .offset = 0,
+               .size = SZ_1M
+       }, {
+               .name = "uImage",
+               .offset = MTDPART_OFS_NXTBLK,
+               .size = SZ_2M
+       }, {
+               .name = "root",
+               .offset = MTDPART_OFS_NXTBLK,
+               .size = MTDPART_SIZ_FULL
+       },
+};
+
+static struct resource rd88f6281_nand_resource = {
+       .flags          = IORESOURCE_MEM,
+       .start          = KIRKWOOD_NAND_MEM_PHYS_BASE,
+       .end            = KIRKWOOD_NAND_MEM_PHYS_BASE +
+                         KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data rd88f6281_nand_data = {
+       .parts          = rd88f6281_nand_parts,
+       .nr_parts       = ARRAY_SIZE(rd88f6281_nand_parts),
+       .cle            = 0,
+       .ale            = 1,
+       .width          = 8,
+};
+
+static struct platform_device rd88f6281_nand_flash = {
+       .name           = "orion_nand",
+       .id             = -1,
+       .dev            = {
+               .platform_data  = &rd88f6281_nand_data,
+       },
+       .resource       = &rd88f6281_nand_resource,
+       .num_resources  = 1,
+};
+
+static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
+       .phy_addr       = -1,
+};
+
+static struct mv_sata_platform_data rd88f6281_sata_data = {
+       .n_ports        = 2,
+};
+
+static void __init rd88f6281_init(void)
+{
+       /*
+        * Basic setup. Needs to be called early.
+        */
+       kirkwood_init();
+
+       kirkwood_ehci_init();
+       kirkwood_ge00_init(&rd88f6281_ge00_data);
+       kirkwood_rtc_init();
+       kirkwood_sata_init(&rd88f6281_sata_data);
+       kirkwood_uart0_init();
+       kirkwood_uart1_init();
+
+       platform_device_register(&rd88f6281_nand_flash);
+}
+
+static int __init rd88f6281_pci_init(void)
+{
+       if (machine_is_rd88f6281())
+               kirkwood_pcie_init();
+
+       return 0;
+}
+subsys_initcall(rd88f6281_pci_init);
+
+MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
+       /* Maintainer: Saeed Bishara <saeed@marvell.com> */
+       .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+       .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
+       .init_machine   = rd88f6281_init,
+       .map_io         = kirkwood_map_io,
+       .init_irq       = kirkwood_init_irq,
+       .timer          = &kirkwood_timer,
+MACHINE_END
index 3b90051c0e05adbc56bdfd233f798c502cb0e981..a7a6efec89742c0d8f113b9fa56bf7fd81045ba6 100644 (file)
@@ -365,7 +365,7 @@ config CPU_XSC3
 # Feroceon
 config CPU_FEROCEON
        bool
-       depends on ARCH_ORION5X || ARCH_LOKI
+       depends on ARCH_ORION5X || ARCH_LOKI || ARCH_KIRKWOOD
        default y
        select CPU_32v5
        select CPU_ABRT_EV5T
@@ -716,7 +716,7 @@ config OUTER_CACHE
 
 config CACHE_FEROCEON_L2
        bool "Enable the Feroceon L2 cache controller"
-       depends on FOOBAR
+       depends on ARCH_KIRKWOOD
        default y
        select OUTER_CACHE
        help
diff --git a/include/asm-arm/arch-kirkwood/debug-macro.S b/include/asm-arm/arch-kirkwood/debug-macro.S
new file mode 100644 (file)
index 0000000..f55fb8a
--- /dev/null
@@ -0,0 +1,20 @@
+/*
+ * include/asm-arm/arch-kirkwood/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/arch/kirkwood.h>
+
+       .macro  addruart,rx
+       mrc     p15, 0, \rx, c1, c0
+       tst     \rx, #1                                 @ MMU enabled?
+       ldreq   \rx, =KIRKWOOD_REGS_PHYS_BASE
+       ldrne   \rx, =KIRKWOOD_REGS_VIRT_BASE
+       orr     \rx, \rx, #0x00012000
+       .endm
+
+#define UART_SHIFT     2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-kirkwood/dma.h b/include/asm-arm/arch-kirkwood/dma.h
new file mode 100644 (file)
index 0000000..40a8c17
--- /dev/null
@@ -0,0 +1 @@
+/* empty */
diff --git a/include/asm-arm/arch-kirkwood/entry-macro.S b/include/asm-arm/arch-kirkwood/entry-macro.S
new file mode 100644 (file)
index 0000000..fc6a43d
--- /dev/null
@@ -0,0 +1,40 @@
+/*
+ * include/asm-arm/arch-kirkwood/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Kirkwood platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/arch/kirkwood.h>
+
+       .macro  disable_fiq
+       .endm
+
+       .macro  arch_ret_to_user, tmp1, tmp2
+       .endm
+
+       .macro  get_irqnr_preamble, base, tmp
+       ldr     \base, =IRQ_VIRT_BASE
+       .endm
+
+       .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+       @ check low interrupts
+       ldr     \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+       ldr     \tmp, [\base, #IRQ_MASK_LOW_OFF]
+       mov     \irqnr, #31
+       ands    \irqstat, \irqstat, \tmp
+       bne     1001f
+
+       @ if no low interrupts set, check high interrupts
+       ldr     \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+       ldr     \tmp, [\base, #IRQ_MASK_HIGH_OFF]
+       mov     \irqnr, #63
+       ands    \irqstat, \irqstat, \tmp
+
+       @ find first active interrupt source
+1001:  clzne   \irqstat, \irqstat
+       subne   \irqnr, \irqnr, \irqstat
+       .endm
diff --git a/include/asm-arm/arch-kirkwood/hardware.h b/include/asm-arm/arch-kirkwood/hardware.h
new file mode 100644 (file)
index 0000000..e695719
--- /dev/null
@@ -0,0 +1,21 @@
+/*
+ * include/asm-arm/arch-kirkwood/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "kirkwood.h"
+
+#define pcibios_assign_all_busses()    1
+
+#define PCIBIOS_MIN_IO                 0x00001000
+#define PCIBIOS_MIN_MEM                        0x01000000
+#define PCIMEM_BASE                    KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/io.h b/include/asm-arm/arch-kirkwood/io.h
new file mode 100644 (file)
index 0000000..0ef6e95
--- /dev/null
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-kirkwood/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "kirkwood.h"
+
+#define IO_SPACE_LIMIT         0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+       return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+                                       + KIRKWOOD_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a)                        __io(a)
+#define __mem_pci(a)           (a)
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/irqs.h b/include/asm-arm/arch-kirkwood/irqs.h
new file mode 100644 (file)
index 0000000..2e7b5da
--- /dev/null
@@ -0,0 +1,63 @@
+/*
+ * include/asm-arm/arch-kirkwood/irqs.h
+ *
+ * IRQ definitions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "kirkwood.h"  /* need GPIO_MAX */
+
+/*
+ * Low Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_HIGH_SUM  0
+#define IRQ_KIRKWOOD_BRIDGE    1
+#define IRQ_KIRKWOOD_HOST2CPU  2
+#define IRQ_KIRKWOOD_CPU2HOST  3
+#define IRQ_KIRKWOOD_XOR_00    5
+#define IRQ_KIRKWOOD_XOR_01    6
+#define IRQ_KIRKWOOD_XOR_10    7
+#define IRQ_KIRKWOOD_XOR_11    8
+#define IRQ_KIRKWOOD_PCIE      9
+#define IRQ_KIRKWOOD_GE00_SUM  11
+#define IRQ_KIRKWOOD_GE01_SUM  15
+#define IRQ_KIRKWOOD_USB       19
+#define IRQ_KIRKWOOD_SATA      21
+#define IRQ_KIRKWOOD_CRYPTO    22
+#define IRQ_KIRKWOOD_SPI       23
+#define IRQ_KIRKWOOD_I2S       24
+#define IRQ_KIRKWOOD_TS_0      26
+#define IRQ_KIRKWOOD_SDIO      28
+#define IRQ_KIRKWOOD_TWSI      29
+#define IRQ_KIRKWOOD_AVB       30
+#define IRQ_KIRKWOOD_TDMI      31
+
+/*
+ * High Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_UART_0    33
+#define IRQ_KIRKWOOD_UART_1    34
+#define IRQ_KIRKWOOD_GPIO_LOW_0_7      35
+#define IRQ_KIRKWOOD_GPIO_LOW_8_15     36
+#define IRQ_KIRKWOOD_GPIO_LOW_16_23    37
+#define IRQ_KIRKWOOD_GPIO_LOW_24_31    38
+#define IRQ_KIRKWOOD_GPIO_HIGH_0_7     39
+#define IRQ_KIRKWOOD_GPIO_HIGH_8_15    40
+#define IRQ_KIRKWOOD_GPIO_HIGH_16_23   41
+
+/*
+ * KIRKWOOD General Purpose Pins
+ */
+#define IRQ_KIRKWOOD_GPIO_START        64
+#define NR_GPIO_IRQS           GPIO_MAX
+
+#define NR_IRQS                        (IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h
new file mode 100644 (file)
index 0000000..520250d
--- /dev/null
@@ -0,0 +1,99 @@
+/*
+ * include/asm-arm/arch-kirkwood/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ *  88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000    PCIe Memory space
+ * f1000000    on-chip peripheral registers
+ * f2000000    PCIe I/O space
+ * f3000000    NAND controller address window
+ *
+ * virt                phys            size
+ * fee00000    f1000000        1M      on-chip peripheral registers
+ * fef00000    f2000000        1M      PCIe I/O space
+ */
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE    0xf3000000
+#define KIRKWOOD_NAND_MEM_SIZE         SZ_64K /* 1K is sufficient, but 64K
+                                               * is the minimal window size
+                                               */
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE     0xf2000000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE     0xfef00000
+#define KIRKWOOD_PCIE_IO_BUS_BASE      0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE          SZ_1M
+
+#define KIRKWOOD_REGS_PHYS_BASE                0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE                0xfee00000
+#define KIRKWOOD_REGS_SIZE             SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE    0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE         SZ_128M
+
+/*
+ * MBUS bridge registers.
+ */
+#define BRIDGE_VIRT_BASE       (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define  CPU_CONTROL           (BRIDGE_VIRT_BASE | 0x0104)
+#define   CPU_RESET            0x00000002
+//#define   L2_WRITETHROUGH    0x00020000
+#define  RSTOUTn_MASK          (BRIDGE_VIRT_BASE | 0x0108)
+#define   SOFT_RESET_OUT_EN    0x00000004
+#define  SYSTEM_SOFT_RESET     (BRIDGE_VIRT_BASE | 0x010c)
+#define   SOFT_RESET           0x00000001
+#define  BRIDGE_CAUSE          (BRIDGE_VIRT_BASE | 0x0110)
+#define  BRIDGE_MASK           (BRIDGE_VIRT_BASE | 0x0114)
+#define   BRIDGE_INT_TIMER0    0x0002
+#define   BRIDGE_INT_TIMER1    0x0004
+#define   BRIDGE_INT_TIMER1_CLR        (~0x0004)
+#define  IRQ_VIRT_BASE         (BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_LOW_OFF    0x0000
+#define   IRQ_MASK_LOW_OFF     0x0004
+#define   IRQ_CAUSE_HIGH_OFF   0x0010
+#define   IRQ_MASK_HIGH_OFF    0x0014
+#define  TIMER_VIRT_BASE       (BRIDGE_VIRT_BASE | 0x0300)
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE          (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
+#define  DDR_WINDOW_CPU_BASE   (DDR_VIRT_BASE | 0x1500)
+
+#define DEV_BUS_PHYS_BASE      (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE      (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
+#define  SAMPLE_AT_RESET       (DEV_BUS_VIRT_BASE | 0x0030)
+#define  DEVICE_ID             (DEV_BUS_VIRT_BASE | 0x0034)
+#define  RTC_PHYS_BASE         (DEV_BUS_PHYS_BASE | 0x0300)
+#define  SPI_PHYS_BASE         (DEV_BUS_PHYS_BASE | 0x0600)
+#define  UART0_PHYS_BASE       (DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE       (DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE       (DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE       (DEV_BUS_VIRT_BASE | 0x2100)
+
+#define PCIE_VIRT_BASE         (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+
+#define USB_PHYS_BASE          (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+
+#define GE00_PHYS_BASE         (KIRKWOOD_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE         (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
+
+#define SATA_PHYS_BASE         (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+
+
+#define GPIO_MAX               50
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/memory.h b/include/asm-arm/arch-kirkwood/memory.h
new file mode 100644 (file)
index 0000000..e5108f4
--- /dev/null
@@ -0,0 +1,14 @@
+/*
+ * include/asm-arm/arch-kirkwood/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET            UL(0x00000000)
+
+#define __virt_to_bus(x)       __virt_to_phys(x)
+#define __bus_to_virt(x)       __phys_to_virt(x)
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/system.h b/include/asm-arm/arch-kirkwood/system.h
new file mode 100644 (file)
index 0000000..8dde7e3
--- /dev/null
@@ -0,0 +1,37 @@
+/*
+ * include/asm-arm/arch-kirkwood/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/kirkwood.h>
+
+static inline void arch_idle(void)
+{
+       cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+       /*
+        * Enable soft reset to assert RSTOUTn.
+        */
+       writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+       /*
+        * Assert soft reset.
+        */
+       writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+       while (1)
+               ;
+}
+
+
+#endif
diff --git a/include/asm-arm/arch-kirkwood/timex.h b/include/asm-arm/arch-kirkwood/timex.h
new file mode 100644 (file)
index 0000000..82122e1
--- /dev/null
@@ -0,0 +1,11 @@
+/*
+ * include/asm-arm/arch-kirkwood/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE                (100 * HZ)
+
+#define KIRKWOOD_TCLK          166666667
diff --git a/include/asm-arm/arch-kirkwood/uncompress.h b/include/asm-arm/arch-kirkwood/uncompress.h
new file mode 100644 (file)
index 0000000..a9062b6
--- /dev/null
@@ -0,0 +1,47 @@
+/*
+ * include/asm-arm/arch-kirkwood/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <asm/arch/kirkwood.h>
+
+#define SERIAL_BASE    ((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+       unsigned char *base = SERIAL_BASE;
+       int i;
+
+       for (i = 0; i < 0x1000; i++) {
+               if (base[UART_LSR << 2] & UART_LSR_THRE)
+                       break;
+               barrier();
+       }
+
+       base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+       unsigned char *base = SERIAL_BASE;
+       unsigned char mask;
+       int i;
+
+       mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+       for (i = 0; i < 0x1000; i++) {
+               if ((base[UART_LSR << 2] & mask) == mask)
+                       break;
+               barrier();
+       }
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/include/asm-arm/arch-kirkwood/vmalloc.h b/include/asm-arm/arch-kirkwood/vmalloc.h
new file mode 100644 (file)
index 0000000..41852c6
--- /dev/null
@@ -0,0 +1,5 @@
+/*
+ * include/asm-arm/arch-kirkwood/vmalloc.h
+ */
+
+#define VMALLOC_END    0xfe800000