e1000e: convert to net_device_ops

Convert e1000e to network device ops.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 4f06641cd6d49413b5b35011bb0953934fad9dea..ced839e4cae808a82c390027af0b63596d3034a4 100644 (file)
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4704,6 +4704,25 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter)
        }
 }
 
+static const struct net_device_ops e1000e_netdev_ops = {
+       .ndo_open               = e1000_open,
+       .ndo_stop               = e1000_close,
+       .ndo_get_stats          = e1000_get_stats,
+       .ndo_set_multicast_list = e1000_set_multi,
+       .ndo_set_mac_address    = e1000_set_mac,
+       .ndo_change_mtu         = e1000_change_mtu,
+       .ndo_do_ioctl           = e1000_ioctl,
+       .ndo_tx_timeout         = e1000_tx_timeout,
+       .ndo_validate_addr      = eth_validate_addr,
+
+       .ndo_vlan_rx_register   = e1000_vlan_rx_register,
+       .ndo_vlan_rx_add_vid    = e1000_vlan_rx_add_vid,
+       .ndo_vlan_rx_kill_vid   = e1000_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+       .ndo_poll_controller    = e1000_netpoll,
+#endif
+};
+
 /**
  * e1000_probe - Device Initialization Routine
  * @pdev: PCI device information struct
@@ -4802,24 +4821,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
        }
 
        /* construct the net_device struct */
-       netdev->open                    = &e1000_open;
-       netdev->stop                    = &e1000_close;
+       netdev->netdev_ops              = &e1000e_netdev_ops;
        netdev->hard_start_xmit         = &e1000_xmit_frame;
-       netdev->get_stats               = &e1000_get_stats;
-       netdev->set_multicast_list      = &e1000_set_multi;
-       netdev->set_mac_address         = &e1000_set_mac;
-       netdev->change_mtu              = &e1000_change_mtu;
-       netdev->do_ioctl                = &e1000_ioctl;
        e1000e_set_ethtool_ops(netdev);
-       netdev->tx_timeout              = &e1000_tx_timeout;
        netdev->watchdog_timeo          = 5 * HZ;
        netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
-       netdev->vlan_rx_register        = e1000_vlan_rx_register;
-       netdev->vlan_rx_add_vid         = e1000_vlan_rx_add_vid;
-       netdev->vlan_rx_kill_vid        = e1000_vlan_rx_kill_vid;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-       netdev->poll_controller         = e1000_netpoll;
-#endif
        strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
 
        netdev->mem_start = mmio_start;