c2port: add c2port support for Eurotech Duramar 2150

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig
index f1bad2b403295d40349f91c23422b52848cee054..e46af9a5810d5363f76976ae14bf1ed6b28ef1d8 100644 (file)
--- a/drivers/misc/c2port/Kconfig
+++ b/drivers/misc/c2port/Kconfig
@@ -21,4 +21,15 @@ menuconfig C2PORT
 
 if C2PORT
 
+config C2PORT_DURAMAR_2150
+       tristate "C2 port support for Eurotech's Duramar 2150 (EXPERIMENTAL)"
+       depends on X86 && C2PORT
+       default no
+       help
+         This option enables C2 support for the Eurotech's Duramar 2150
+         on board micro controller.
+
+         To compile this driver as a module, choose M here: the module will
+         be called c2port-duramar2150.
+
 endif # C2PORT

diff --git a/drivers/misc/c2port/Makefile b/drivers/misc/c2port/Makefile
index 3c610a2ba5ececc3fb2419f3dcaa2c60d0f5ade0..3b2cf43d60f5ae917d4cc182b6a8449bc25e8dd1 100644 (file)
--- a/drivers/misc/c2port/Makefile
+++ b/drivers/misc/c2port/Makefile
@@ -1 +1,3 @@
 obj-$(CONFIG_C2PORT)           += core.o
+
+obj-$(CONFIG_C2PORT_DURAMAR_2150)      += c2port-duramar2150.o

diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c
new file mode 100644 (file)
index 0000000..338dcc1
--- /dev/null
+++ b/drivers/misc/c2port/c2port-duramar2150.c
@@ -0,0 +1,158 @@
+/*
+ *  Silicon Labs C2 port Linux support for Eurotech Duramar 2150
+ *
+ *  Copyright (c) 2008 Rodolfo Giometti <giometti@linux.it>
+ *  Copyright (c) 2008 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/c2port.h>
+
+#define DATA_PORT      0x325
+#define DIR_PORT       0x326
+#define    C2D            (1 << 0)
+#define    C2CK                   (1 << 1)
+
+static DEFINE_MUTEX(update_lock);
+
+/*
+ * C2 port operations
+ */
+
+static void duramar2150_c2port_access(struct c2port_device *dev, int status)
+{
+       u8 v;
+
+       mutex_lock(&update_lock);
+
+       v = inb(DIR_PORT);
+
+       /* 0 = input, 1 = output */
+       if (status)
+               outb(v | (C2D | C2CK), DIR_PORT);
+       else
+               /* When access is "off" is important that both lines are set
+                * as inputs or hi-impedence */
+               outb(v & ~(C2D | C2CK), DIR_PORT);
+
+       mutex_unlock(&update_lock);
+}
+
+static void duramar2150_c2port_c2d_dir(struct c2port_device *dev, int dir)
+{
+       u8 v;
+
+       mutex_lock(&update_lock);
+
+       v = inb(DIR_PORT);
+
+       if (dir)
+               outb(v & ~C2D, DIR_PORT);
+       else
+               outb(v | C2D, DIR_PORT);
+
+       mutex_unlock(&update_lock);
+}
+
+static int duramar2150_c2port_c2d_get(struct c2port_device *dev)
+{
+       return inb(DATA_PORT) & C2D;
+}
+
+static void duramar2150_c2port_c2d_set(struct c2port_device *dev, int status)
+{
+       u8 v;
+
+       mutex_lock(&update_lock);
+
+       v = inb(DATA_PORT);
+
+       if (status)
+               outb(v | C2D, DATA_PORT);
+       else
+               outb(v & ~C2D, DATA_PORT);
+
+       mutex_unlock(&update_lock);
+}
+
+static void duramar2150_c2port_c2ck_set(struct c2port_device *dev, int status)
+{
+       u8 v;
+
+       mutex_lock(&update_lock);
+
+       v = inb(DATA_PORT);
+
+       if (status)
+               outb(v | C2CK, DATA_PORT);
+       else
+               outb(v & ~C2CK, DATA_PORT);
+
+       mutex_unlock(&update_lock);
+}
+
+static struct c2port_ops duramar2150_c2port_ops = {
+       .block_size     = 512,  /* bytes */
+       .blocks_num     = 30,   /* total flash size: 15360 bytes */
+
+       .access         = duramar2150_c2port_access,
+       .c2d_dir        = duramar2150_c2port_c2d_dir,
+       .c2d_get        = duramar2150_c2port_c2d_get,
+       .c2d_set        = duramar2150_c2port_c2d_set,
+       .c2ck_set       = duramar2150_c2port_c2ck_set,
+};
+
+static struct c2port_device *duramar2150_c2port_dev;
+
+/*
+ * Module stuff
+ */
+
+static int __init duramar2150_c2port_init(void)
+{
+       struct resource *res;
+       int ret = 0;
+
+       res = request_region(0x325, 2, "c2port");
+       if (!res)
+               return -EBUSY;
+
+       duramar2150_c2port_dev = c2port_device_register("uc",
+                                       &duramar2150_c2port_ops, NULL);
+       if (!duramar2150_c2port_dev) {
+               ret = -ENODEV;
+               goto free_region;
+       }
+
+       return 0;
+
+free_region:
+       release_region(0x325, 2);
+       return ret;
+}
+
+static void __exit duramar2150_c2port_exit(void)
+{
+       /* Setup the GPIOs as input by default (access = 0) */
+       duramar2150_c2port_access(duramar2150_c2port_dev, 0);
+
+       c2port_device_unregister(duramar2150_c2port_dev);
+
+       release_region(0x325, 2);
+}
+
+module_init(duramar2150_c2port_init);
+module_exit(duramar2150_c2port_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("Silicon Labs C2 port Linux support for Duramar 2150");
+MODULE_LICENSE("GPL");