]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] USB: more omap_udc updates (dma and omap1710)
authorDavid Brownell <david-b@pacbell.net>
Thu, 28 Apr 2005 20:52:31 +0000 (13:52 -0700)
committerGreg Kroah-Hartman <gregkh@suse.de>
Mon, 27 Jun 2005 21:43:50 +0000 (14:43 -0700)
More omap_udc updates:

  * OMAP 1710 updates
      - new UDC bit for clearing endpoint toggle, affecting CLEAR_HALT
      - new OTG bits affecting wakeup
  * Fix the bug Vladimir noted, that IN-DMA transfer code path kicks in
    for under 1024 bytes (not "up to 1024 bytes")
  * Handle transceiver setup more intelligently
      - use transceiver whenever one's available; this can be handy
        for GPIO based, loopback, or transceiverless configs
      - cleanup correctly after the "unrecognized HMC" case
  * DMA performance tweaks
      - allow burst/pack for memory access
      - use 16 bit DMA access most of the time on TIPB
  * Add workarounds for some DMA errata (not observed "in the wild"):
      - DMA CSAC/CDAC reads returning zero
      - RX/TX DMA config registers bit 12 always reads as zero (TI patch)
  * More "sparse" warnings removed, notably "changing" the SETUP packet
    to return data in USB byteorder (an API change, null effect on OMAP
    except for these warnings).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/gadget/omap_udc.c
drivers/usb/gadget/omap_udc.h
include/asm-arm/arch-omap/usb.h

index 4ec91a68f96c517db7cad867b055a328874b33a4..a2b812af6e669ab69a384912e18626cbd07190e4 100644 (file)
@@ -166,7 +166,7 @@ static int omap_ep_enable(struct usb_ep *_ep,
        maxp = le16_to_cpu (desc->wMaxPacketSize);
        if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
                                && maxp != ep->maxpacket)
-                       || desc->wMaxPacketSize > ep->maxpacket
+                       || le16_to_cpu(desc->wMaxPacketSize) > ep->maxpacket
                        || !desc->wMaxPacketSize) {
                DBG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
                return -ERANGE;
@@ -213,7 +213,7 @@ static int omap_ep_enable(struct usb_ep *_ep,
        ep->has_dma = 0;
        ep->lch = -1;
        use_ep(ep, UDC_EP_SEL);
-       UDC_CTRL_REG = UDC_RESET_EP;
+       UDC_CTRL_REG = udc->clr_halt;
        ep->ackwait = 0;
        deselect_ep();
 
@@ -537,6 +537,32 @@ static int read_fifo(struct omap_ep *ep, struct omap_req *req)
 
 /*-------------------------------------------------------------------------*/
 
+static inline dma_addr_t dma_csac(unsigned lch)
+{
+       dma_addr_t      csac;
+
+       /* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
+        * read before the DMA controller finished disabling the channel.
+        */
+       csac = omap_readw(OMAP_DMA_CSAC(lch));
+       if (csac == 0)
+               csac = omap_readw(OMAP_DMA_CSAC(lch));
+       return csac;
+}
+
+static inline dma_addr_t dma_cdac(unsigned lch)
+{
+       dma_addr_t      cdac;
+
+       /* omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
+        * read before the DMA controller finished disabling the channel.
+        */
+       cdac = omap_readw(OMAP_DMA_CDAC(lch));
+       if (cdac == 0)
+               cdac = omap_readw(OMAP_DMA_CDAC(lch));
+       return cdac;
+}
+
 static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start)
 {
        dma_addr_t      end;
@@ -547,7 +573,7 @@ static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start)
        if (cpu_is_omap15xx())
                return 0;
 
-       end = omap_readw(OMAP_DMA_CSAC(ep->lch));
+       end = dma_csac(ep->lch);
        if (end == ep->dma_counter)
                return 0;
 
@@ -558,14 +584,14 @@ static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start)
 }
 
 #define DMA_DEST_LAST(x) (cpu_is_omap15xx() \
-               ? OMAP_DMA_CSAC(x) /* really: CPC */ \
-               : OMAP_DMA_CDAC(x))
+               ? omap_readw(OMAP_DMA_CSAC(x)) /* really: CPC */ \
+               : dma_cdac(x))
 
 static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start)
 {
        dma_addr_t      end;
 
-       end = omap_readw(DMA_DEST_LAST(ep->lch));
+       end = DMA_DEST_LAST(ep->lch);
        if (end == ep->dma_counter)
                return 0;
 
@@ -592,7 +618,7 @@ static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
                                : OMAP_DMA_SYNC_ELEMENT;
 
        /* measure length in either bytes or packets */
-       if ((cpu_is_omap16xx() && length <= (UDC_TXN_TSC + 1))
+       if ((cpu_is_omap16xx() && length <= UDC_TXN_TSC)
                        || (cpu_is_omap15xx() && length < ep->maxpacket)) {
                txdma_ctrl = UDC_TXN_EOT | length;
                omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
@@ -601,15 +627,15 @@ static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
                length = min(length / ep->maxpacket,
                                (unsigned) UDC_TXN_TSC + 1);
                txdma_ctrl = length;
-               omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
-                               ep->ep.maxpacket, length, sync_mode);
+               omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
+                               ep->ep.maxpacket >> 1, length, sync_mode);
                length *= ep->maxpacket;
        }
        omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_EMIFF,
                OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual);
 
        omap_start_dma(ep->lch);
-       ep->dma_counter = omap_readw(OMAP_DMA_CSAC(ep->lch));
+       ep->dma_counter = dma_csac(ep->lch);
        UDC_DMA_IRQ_EN_REG |= UDC_TX_DONE_IE(ep->dma_channel);
        UDC_TXDMA_REG(ep->dma_channel) = UDC_TXN_START | txdma_ctrl;
        req->dma_bytes = length;
@@ -649,12 +675,12 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
        packets = (req->req.length - req->req.actual) / ep->ep.maxpacket;
        packets = min(packets, (unsigned)UDC_RXN_TC + 1);
        req->dma_bytes = packets * ep->ep.maxpacket;
-       omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
-                       ep->ep.maxpacket, packets,
+       omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S16,
+                       ep->ep.maxpacket >> 1, packets,
                        OMAP_DMA_SYNC_ELEMENT);
        omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF,
                OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual);
-       ep->dma_counter = omap_readw(DMA_DEST_LAST(ep->lch));
+       ep->dma_counter = DMA_DEST_LAST(ep->lch);
 
        UDC_RXDMA_REG(ep->dma_channel) = UDC_RXN_STOP | (packets - 1);
        UDC_DMA_IRQ_EN_REG |= UDC_RX_EOT_IE(ep->dma_channel);
@@ -762,7 +788,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
                reg = UDC_TXDMA_CFG_REG;
        else
                reg = UDC_RXDMA_CFG_REG;
-       reg |= 1 << 12;         /* "pulse" activated */
+       reg |= UDC_DMA_REQ;             /* "pulse" activated */
 
        ep->dma_channel = 0;
        ep->lch = -1;
@@ -786,6 +812,11 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
                        ep->ep.name, dma_error, ep, &ep->lch);
                if (status == 0) {
                        UDC_TXDMA_CFG_REG = reg;
+                       /* EMIFF */
+                       omap_set_dma_src_burst_mode(ep->lch,
+                                               OMAP_DMA_DATA_BURST_4);
+                       omap_set_dma_src_data_pack(ep->lch, 1);
+                       /* TIPB */
                        omap_set_dma_dest_params(ep->lch,
                                OMAP_DMA_PORT_TIPB,
                                OMAP_DMA_AMODE_CONSTANT,
@@ -796,10 +827,15 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
                        ep->ep.name, dma_error, ep, &ep->lch);
                if (status == 0) {
                        UDC_RXDMA_CFG_REG = reg;
+                       /* TIPB */
                        omap_set_dma_src_params(ep->lch,
                                OMAP_DMA_PORT_TIPB,
                                OMAP_DMA_AMODE_CONSTANT,
                                (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG));
+                       /* EMIFF */
+                       omap_set_dma_dest_burst_mode(ep->lch,
+                                               OMAP_DMA_DATA_BURST_4);
+                       omap_set_dma_dest_data_pack(ep->lch, 1);
                }
        }
        if (status)
@@ -864,9 +900,13 @@ static void dma_channel_release(struct omap_ep *ep)
                        (ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r',
                        ep->dma_channel - 1, req);
 
+       /* NOTE: re-setting RX_REQ/TX_REQ because of a chip bug (before
+        * OMAP 1710 ES2.0) where reading the DMA_CFG can clear them.
+        */
+
        /* wait till current packet DMA finishes, and fifo empties */
        if (ep->bEndpointAddress & USB_DIR_IN) {
-               UDC_TXDMA_CFG_REG &= ~mask;
+               UDC_TXDMA_CFG_REG = (UDC_TXDMA_CFG_REG & ~mask) | UDC_DMA_REQ;
 
                if (req) {
                        finish_in_dma(ep, req, -ECONNRESET);
@@ -879,7 +919,7 @@ static void dma_channel_release(struct omap_ep *ep)
                while (UDC_TXDMA_CFG_REG & mask)
                        udelay(10);
        } else {
-               UDC_RXDMA_CFG_REG &= ~mask;
+               UDC_RXDMA_CFG_REG = (UDC_RXDMA_CFG_REG & ~mask) | UDC_DMA_REQ;
 
                /* dma empties the fifo */
                while (UDC_RXDMA_CFG_REG & mask)
@@ -1140,7 +1180,7 @@ static int omap_ep_set_halt(struct usb_ep *_ep, int value)
                                dma_channel_claim(ep, channel);
                } else {
                        use_ep(ep, 0);
-                       UDC_CTRL_REG = UDC_RESET_EP;
+                       UDC_CTRL_REG = ep->udc->clr_halt;
                        ep->ackwait = 0;
                        if (!(ep->bEndpointAddress & USB_DIR_IN)) {
                                UDC_CTRL_REG = UDC_SET_FIFO_EN;
@@ -1514,6 +1554,10 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
                        UDC_EP_NUM_REG = 0;
                } while (UDC_IRQ_SRC_REG & UDC_SETUP);
 
+#define        w_value         le16_to_cpup (&u.r.wValue)
+#define        w_index         le16_to_cpup (&u.r.wIndex)
+#define        w_length        le16_to_cpup (&u.r.wLength)
+
                /* Delegate almost all control requests to the gadget driver,
                 * except for a handful of ch9 status/feature requests that
                 * hardware doesn't autodecode _and_ the gadget API hides.
@@ -1528,11 +1572,11 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
                        /* udc needs to know when ep != 0 is valid */
                        if (u.r.bRequestType != USB_RECIP_DEVICE)
                                goto delegate;
-                       if (u.r.wLength != 0)
+                       if (w_length != 0)
                                goto do_stall;
                        udc->ep0_set_config = 1;
-                       udc->ep0_reset_config = (u.r.wValue == 0);
-                       VDBG("set config %d\n", u.r.wValue);
+                       udc->ep0_reset_config = (w_value == 0);
+                       VDBG("set config %d\n", w_value);
 
                        /* update udc NOW since gadget driver may start
                         * queueing requests immediately; clear config
@@ -1548,18 +1592,18 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
                        /* clear endpoint halt */
                        if (u.r.bRequestType != USB_RECIP_ENDPOINT)
                                goto delegate;
-                       if (u.r.wValue != USB_ENDPOINT_HALT
-                                       || u.r.wLength != 0)
+                       if (w_value != USB_ENDPOINT_HALT
+                                       || w_length != 0)
                                goto do_stall;
-                       ep = &udc->ep[u.r.wIndex & 0xf];
+                       ep = &udc->ep[w_index & 0xf];
                        if (ep != ep0) {
-                               if (u.r.wIndex & USB_DIR_IN)
+                               if (w_index & USB_DIR_IN)
                                        ep += 16;
                                if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
                                                || !ep->desc)
                                        goto do_stall;
                                use_ep(ep, 0);
-                               UDC_CTRL_REG = UDC_RESET_EP;
+                               UDC_CTRL_REG = udc->clr_halt;
                                ep->ackwait = 0;
                                if (!(ep->bEndpointAddress & USB_DIR_IN)) {
                                        UDC_CTRL_REG = UDC_SET_FIFO_EN;
@@ -1577,11 +1621,11 @@ static void ep0_irq(struct omap_udc *udc, u16 irq_src)
                        /* set endpoint halt */
                        if (u.r.bRequestType != USB_RECIP_ENDPOINT)
                                goto delegate;
-                       if (u.r.wValue != USB_ENDPOINT_HALT
-                                       || u.r.wLength != 0)
+                       if (w_value != USB_ENDPOINT_HALT
+                                       || w_length != 0)
                                goto do_stall;
-                       ep = &udc->ep[u.r.wIndex & 0xf];
-                       if (u.r.wIndex & USB_DIR_IN)
+                       ep = &udc->ep[w_index & 0xf];
+                       if (w_index & USB_DIR_IN)
                                ep += 16;
                        if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
                                        || ep == ep0 || !ep->desc)
@@ -1619,13 +1663,13 @@ ep0out_status_stage:
                        UDC_CTRL_REG = UDC_SET_FIFO_EN;
                        UDC_EP_NUM_REG = UDC_EP_DIR;
                        status = 0;
-                       VDBG("GET_STATUS, interface %d\n", u.r.wIndex);
+                       VDBG("GET_STATUS, interface %d\n", w_index);
                        /* next, status stage */
                        break;
                default:
 delegate:
                        /* activate the ep0out fifo right away */
-                       if (!udc->ep0_in && u.r.wLength) {
+                       if (!udc->ep0_in && w_length) {
                                UDC_EP_NUM_REG = 0;
                                UDC_CTRL_REG = UDC_SET_FIFO_EN;
                        }
@@ -1636,7 +1680,11 @@ delegate:
                         */
                        VDBG("SETUP %02x.%02x v%04x i%04x l%04x\n",
                                u.r.bRequestType, u.r.bRequest,
-                               u.r.wValue, u.r.wIndex, u.r.wLength);
+                               w_value, w_index, w_length);
+
+#undef w_value
+#undef w_index
+#undef w_length
 
                        /* The gadget driver may return an error here,
                         * causing an immediate protocol stall.
@@ -2181,14 +2229,14 @@ static int proc_otg_show(struct seq_file *s)
 
        tmp = OTG_REV_REG;
        trans = USB_TRANSCEIVER_CTRL_REG;
-       seq_printf(s, "\nOTG rev %d.%d, transceiver_ctrl %03x\n",
+       seq_printf(s, "\nOTG rev %d.%d, transceiver_ctrl %05x\n",
                tmp >> 4, tmp & 0xf, trans);
        tmp = OTG_SYSCON_1_REG;
        seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s,"
                        FOURBITS "\n", tmp,
                trx_mode(USB2_TRX_MODE(tmp), trans & CONF_USB2_UNI_R),
                trx_mode(USB1_TRX_MODE(tmp), trans & CONF_USB1_UNI_R),
-               (USB0_TRX_MODE(tmp) == 0)
+               (USB0_TRX_MODE(tmp) == 0 && !cpu_is_omap1710())
                        ? "internal"
                        : trx_mode(USB0_TRX_MODE(tmp), 1),
                (tmp & OTG_IDLE_EN) ? " !otg" : "",
@@ -2418,6 +2466,10 @@ static inline void remove_proc_file(void) {}
 /* Before this controller can enumerate, we need to pick an endpoint
  * configuration, or "fifo_mode"  That involves allocating 2KB of packet
  * buffer space among the endpoints we'll be operating.
+ *
+ * NOTE: as of OMAP 1710 ES2.0, writing a new endpoint config when
+ * UDC_SYSCON_1_REG.CFG_LOCK is set can now work.  We won't use that
+ * capability yet though.
  */
 static unsigned __init
 omap_ep_setup(char *name, u8 addr, u8 type,
@@ -2690,6 +2742,19 @@ static int __init omap_udc_probe(struct device *dev)
                        FUNC_MUX_CTRL_0_REG = tmp;
                }
        } else {
+               /* The transceiver may package some GPIO logic or handle
+                * loopback and/or transceiverless setup; if we find one,
+                * use it.  Except for OTG, we don't _need_ to talk to one;
+                * but not having one probably means no VBUS detection.
+                */
+               xceiv = otg_get_transceiver();
+               if (xceiv)
+                       type = xceiv->label;
+               else if (config->otg) {
+                       DBG("OTG requires external transceiver!\n");
+                       goto cleanup0;
+               }
+
                hmc = HMC_1610;
                switch (hmc) {
                case 0:                 /* POWERUP DEFAULT == 0 */
@@ -2706,25 +2771,27 @@ static int __init omap_udc_probe(struct device *dev)
                case 16:
                case 19:
                case 25:
-                       xceiv = otg_get_transceiver();
                        if (!xceiv) {
                                DBG("external transceiver not registered!\n");
-                               if (config->otg)
-                                       goto cleanup0;
                                type = "unknown";
-                       } else
-                               type = xceiv->label;
+                       }
                        break;
                case 21:                        /* internal loopback */
                        type = "loopback";
                        break;
                case 14:                        /* transceiverless */
+                       if (cpu_is_omap1710())
+                               goto bad_on_1710;
+                       /* FALL THROUGH */
+               case 13:
+               case 15:
                        type = "no";
                        break;
 
                default:
+bad_on_1710:
                        ERR("unrecognized UDC HMC mode %d\n", hmc);
-                       return -ENODEV;
+                       goto cleanup0;
                }
        }
        INFO("hmc mode %d, %s transceiver\n", hmc, type);
@@ -2741,6 +2808,12 @@ static int __init omap_udc_probe(struct device *dev)
        udc->gadget.is_otg = (config->otg != 0);
 #endif
 
+       /* starting with omap1710 es2.0, clear toggle is a separate bit */
+       if (UDC_REV_REG >= 0x61)
+               udc->clr_halt = UDC_RESET_EP | UDC_CLRDATA_TOGGLE;
+       else
+               udc->clr_halt = UDC_RESET_EP;
+
        /* USB general purpose IRQ:  ep0, state changes, dma, etc */
        status = request_irq(odev->resource[1].start, omap_udc_irq,
                        SA_SAMPLE_RANDOM, driver_name, udc);
index c9e68541622c9e86c12372fd03b25b3766c3f432..652ee462734470345eed415a474c096fbe4a7909 100644 (file)
@@ -20,6 +20,7 @@
 #define        UDC_CTRL_REG                    UDC_REG(0x0C)   /* Endpoint control */
 #      define  UDC_CLR_HALT            (1 << 7)
 #      define  UDC_SET_HALT            (1 << 6)
+#      define  UDC_CLRDATA_TOGGLE      (1 << 3)
 #      define  UDC_SET_FIFO_EN         (1 << 2)
 #      define  UDC_CLR_EP              (1 << 1)
 #      define  UDC_RESET_EP            (1 << 0)
 
 /* DMA configuration registers:  up to three channels in each direction.  */
 #define        UDC_RXDMA_CFG_REG               UDC_REG(0x40)   /* 3 eps for RX DMA */
+#      define  UDC_DMA_REQ             (1 << 12)
 #define        UDC_TXDMA_CFG_REG               UDC_REG(0x44)   /* 3 eps for TX DMA */
 #define        UDC_DATA_DMA_REG                UDC_REG(0x48)   /* rx/tx fifo addr */
 
@@ -162,6 +164,7 @@ struct omap_udc {
        spinlock_t                      lock;
        struct omap_ep                  ep[32];
        u16                             devstat;
+       u16                             clr_halt;
        struct otg_transceiver          *transceiver;
        struct list_head                iso;
        unsigned                        softconnect:1;
@@ -171,7 +174,6 @@ struct omap_udc {
        unsigned                        ep0_set_config:1;
        unsigned                        ep0_reset_config:1;
        unsigned                        ep0_setup:1;
-
        struct completion               *done;
 };
 
index 1438c6cef0caa1bd9bf5fb7ba39b769e96c75fe6..054fb9a8e0c684052ec4046be5c887c61538582b 100644 (file)
 #      define   HMC_TLLATTACH          (1 << 6)
 #      define   OTG_HMC(w)             (((w)>>0)&0x3f)
 #define OTG_CTRL_REG                   OTG_REG32(0x0c)
+#      define   OTG_USB2_EN            (1 << 29)
+#      define   OTG_USB2_DP            (1 << 28)
+#      define   OTG_USB2_DM            (1 << 27)
+#      define   OTG_USB1_EN            (1 << 26)
+#      define   OTG_USB1_DP            (1 << 25)
+#      define   OTG_USB1_DM            (1 << 24)
+#      define   OTG_USB0_EN            (1 << 23)
+#      define   OTG_USB0_DP            (1 << 22)
+#      define   OTG_USB0_DM            (1 << 21)
 #      define   OTG_ASESSVLD           (1 << 20)
 #      define   OTG_BSESSEND           (1 << 19)
 #      define   OTG_BSESSVLD           (1 << 18)