[POWERPC] Create Marvell mv64x60 ethernet platform_data

This patch creates platform_device entries for the Marvell mv64x60
ethernet controller ports, based on information contained in the
device tree.

This driver (like the other mv64x60 drivers) are unusual in that it
works on both the MIPS and PowerPC architectures.  Because of that,
the drivers do not support the normal PowerPC of_platform_bus_type.
They support platform_bus_type instead.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
index 735d20fa586b6ade380382e980a30bc82d588575..0ccc495340bb7793ad2099d7905e526bba1956fa 100644 (file)
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ b/arch/powerpc/sysdev/mv64x60_dev.c
@@ -201,6 +201,128 @@ error:
        return err;
 }
 
+/*
+ * Create mv64x60_eth platform devices
+ */
+static int __init eth_register_shared_pdev(struct device_node *np)
+{
+       struct platform_device *pdev;
+       struct resource r[1];
+       int err;
+
+       np = of_get_parent(np);
+       if (!np)
+               return -ENODEV;
+
+       err = of_address_to_resource(np, 0, &r[0]);
+       of_node_put(np);
+       if (err)
+               return err;
+
+       pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, 0,
+                                              r, 1);
+       if (IS_ERR(pdev))
+               return PTR_ERR(pdev);
+
+       return 0;
+}
+
+static int __init mv64x60_eth_device_setup(struct device_node *np, int id)
+{
+       struct resource r[1];
+       struct mv643xx_eth_platform_data pdata;
+       struct platform_device *pdev;
+       struct device_node *phy;
+       const u8 *mac_addr;
+       const int *prop;
+       const phandle *ph;
+       int err;
+
+       /* only register the shared platform device the first time through */
+       if (id == 0 && (err = eth_register_shared_pdev(np)))
+               return err;;
+
+       memset(r, 0, sizeof(r));
+       of_irq_to_resource(np, 0, &r[0]);
+
+       memset(&pdata, 0, sizeof(pdata));
+
+       prop = of_get_property(np, "block-index", NULL);
+       if (!prop)
+               return -ENODEV;
+       pdata.port_number = *prop;
+
+       mac_addr = of_get_mac_address(np);
+       if (mac_addr)
+               memcpy(pdata.mac_addr, mac_addr, 6);
+
+       prop = of_get_property(np, "speed", NULL);
+       if (prop)
+               pdata.speed = *prop;
+
+       prop = of_get_property(np, "tx_queue_size", NULL);
+       if (prop)
+               pdata.tx_queue_size = *prop;
+
+       prop = of_get_property(np, "rx_queue_size", NULL);
+       if (prop)
+               pdata.rx_queue_size = *prop;
+
+       prop = of_get_property(np, "tx_sram_addr", NULL);
+       if (prop)
+               pdata.tx_sram_addr = *prop;
+
+       prop = of_get_property(np, "tx_sram_size", NULL);
+       if (prop)
+               pdata.tx_sram_size = *prop;
+
+       prop = of_get_property(np, "rx_sram_addr", NULL);
+       if (prop)
+               pdata.rx_sram_addr = *prop;
+
+       prop = of_get_property(np, "rx_sram_size", NULL);
+       if (prop)
+               pdata.rx_sram_size = *prop;
+
+       ph = of_get_property(np, "phy", NULL);
+       if (!ph)
+               return -ENODEV;
+
+       phy = of_find_node_by_phandle(*ph);
+       if (phy == NULL)
+               return -ENODEV;
+
+       prop = of_get_property(phy, "reg", NULL);
+       if (prop) {
+               pdata.force_phy_addr = 1;
+               pdata.phy_addr = *prop;
+       }
+
+       of_node_put(phy);
+
+       pdev = platform_device_alloc(MV643XX_ETH_NAME, pdata.port_number);
+       if (!pdev)
+               return -ENOMEM;
+
+       err = platform_device_add_resources(pdev, r, 1);
+       if (err)
+               goto error;
+
+       err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+       if (err)
+               goto error;
+
+       err = platform_device_add(pdev);
+       if (err)
+               goto error;
+
+       return 0;
+
+error:
+       platform_device_put(pdev);
+       return err;
+}
+
 static int __init mv64x60_device_setup(void)
 {
        struct device_node *np = NULL;
@@ -212,6 +334,13 @@ static int __init mv64x60_device_setup(void)
                if ((err = mv64x60_mpsc_device_setup(np, id)))
                        goto error;
 
+       for (id = 0;
+            (np = of_find_compatible_node(np, "network",
+                                          "marvell,mv64x60-eth"));
+            id++)
+               if ((err = mv64x60_eth_device_setup(np, id)))
+                       goto error;
+
        return 0;
 
 error:

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fa489b10c38cf8bd8da0a67ac63c5ea927333724..08e594d495d71c2ca6cd9d4ab8b4edf616a86cf8 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2299,7 +2299,7 @@ config UGETH_TX_ON_DEMAND
 
 config MV643XX_ETH
        tristate "MV-643XX Ethernet support"
-       depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
+       depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MV64X60 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
        select MII
        help
          This driver supports the gigabit Ethernet on the Marvell MV643XX