]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] pxa/em-x270: update MMC/SDIO implementation
authorMike Rapoport <mike@compulab.co.il>
Mon, 2 Feb 2009 06:57:51 +0000 (08:57 +0200)
committerEric Miao <eric.miao@marvell.com>
Mon, 2 Feb 2009 09:40:16 +0000 (17:40 +0800)
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
arch/arm/mach-pxa/em-x270.c

index 1aaae97de7d39d9b3b6fab6f2412aeb593be78a4..05f9e9e1224b0a12a20639f5444cca29e2af95ce 100644 (file)
 #include <mach/pxa2xx_spi.h>
 
 #include "generic.h"
+#include "devices.h"
 
 /* GPIO IRQ usage */
 #define GPIO41_ETHIRQ          (41)
 #define GPIO13_MMC_CD          (13)
 #define EM_X270_ETHIRQ         IRQ_GPIO(GPIO41_ETHIRQ)
-#define EM_X270_MMC_CD         IRQ_GPIO(GPIO13_MMC_CD)
 
 /* NAND control GPIOs */
 #define GPIO11_NAND_CS (11)
@@ -56,6 +56,7 @@
 
 /* Miscelaneous GPIOs */
 #define GPIO93_CAM_RESET       (93)
+#define GPIO95_MMC_WP          (95)
 
 static unsigned long em_x270_pin_config[] = {
        /* AC'97 */
@@ -163,7 +164,8 @@ static unsigned long em_x270_pin_config[] = {
        GPIO18_RDY,
 
        /* GPIO */
-       GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+       GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,       /* sleep/resume button */
+       GPIO95_GPIO,                            /* MMC Write protect */
 
        /* power controls */
        GPIO20_GPIO     | MFP_LPM_DRIVE_LOW,    /* GPRS_PWEN */
@@ -464,47 +466,86 @@ static inline void em_x270_init_ohci(void) {}
 
 /* MCI controller setup */
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+static struct regulator *em_x270_sdio_ldo;
+
 static int em_x270_mci_init(struct device *dev,
                            irq_handler_t em_x270_detect_int,
                            void *data)
 {
-       int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
-                             IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+       int err;
+
+       em_x270_sdio_ldo = regulator_get(dev, "vcc sdio");
+       if (IS_ERR(em_x270_sdio_ldo)) {
+               dev_err(dev, "can't request SDIO power supply: %ld\n",
+                       PTR_ERR(em_x270_sdio_ldo));
+               return PTR_ERR(em_x270_sdio_ldo);
+       }
+
+       err = request_irq(gpio_to_irq(GPIO13_MMC_CD), em_x270_detect_int,
+                             IRQF_DISABLED | IRQF_TRIGGER_RISING |
+                             IRQF_TRIGGER_FALLING,
                              "MMC card detect", data);
        if (err) {
-               printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
-                      __func__, err);
-               return err;
+               dev_err(dev, "can't request MMC card detect IRQ: %d\n", err);
+               goto err_irq;
+       }
+
+       err = gpio_request(GPIO95_MMC_WP, "MMC WP");
+       if (err) {
+               dev_err(dev, "can't request MMC write protect: %d\n", err);
+               goto err_gpio_wp;
        }
 
+       gpio_direction_input(GPIO95_MMC_WP);
+
        return 0;
+
+err_gpio_wp:
+       free_irq(gpio_to_irq(GPIO13_MMC_CD), data);
+err_irq:
+       regulator_put(em_x270_sdio_ldo);
+
+       return err;
 }
 
 static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 {
-       /*
-          FIXME: current hardware implementation does not allow to
-          enable/disable MMC power. This will be fixed in next HW releases,
-          and we'll need to add implmentation here.
-       */
-       return;
+       struct pxamci_platform_data* p_d = dev->platform_data;
+
+       if ((1 << vdd) & p_d->ocr_mask) {
+               int vdd_uV = (2000 + (vdd - __ffs(MMC_VDD_20_21)) * 100) * 1000;
+
+               regulator_set_voltage(em_x270_sdio_ldo, vdd_uV, vdd_uV);
+               regulator_enable(em_x270_sdio_ldo);
+       } else {
+               regulator_disable(em_x270_sdio_ldo);
+       }
 }
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-       int irq = gpio_to_irq(GPIO13_MMC_CD);
-       free_irq(irq, data);
+       free_irq(gpio_to_irq(GPIO13_MMC_CD), data);
+}
+
+static int em_x270_mci_get_ro(struct device *dev)
+{
+       return gpio_get_value(GPIO95_MMC_WP);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
-       .ocr_mask       = MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31,
+       .ocr_mask       = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+                         MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+                         MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+                         MMC_VDD_30_31|MMC_VDD_31_32,
        .init           = em_x270_mci_init,
        .setpower       = em_x270_mci_setpower,
+       .get_ro         = em_x270_mci_get_ro,
        .exit           = em_x270_mci_exit,
 };
 
 static void __init em_x270_init_mmc(void)
 {
+       em_x270_mci_platform_data.detect_delay  = msecs_to_jiffies(250);
        pxa_set_mci_info(&em_x270_mci_platform_data);
 }
 #else
@@ -757,6 +798,13 @@ static struct regulator_consumer_supply ldo5_consumers[] = {
        },
 };
 
+static struct regulator_consumer_supply ldo10_consumers[] = {
+       {
+               .dev = &pxa_device_mci.dev,
+               .supply = "vcc sdio",
+       },
+};
+
 static struct regulator_consumer_supply ldo12_consumers[] = {
        {
                .dev = NULL,
@@ -795,6 +843,19 @@ static struct regulator_init_data ldo5_data = {
        .consumer_supplies = ldo5_consumers,
 };
 
+static struct regulator_init_data ldo10_data = {
+       .constraints = {
+               .min_uV = 2000000,
+               .max_uV = 3200000,
+               .state_mem = {
+                       .enabled = 0,
+               },
+               .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
+       },
+       .num_consumer_supplies = ARRAY_SIZE(ldo10_consumers),
+       .consumer_supplies = ldo10_consumers,
+};
+
 static struct regulator_init_data ldo12_data = {
        .constraints = {
                .min_uV = 3000000,
@@ -833,6 +894,10 @@ struct da903x_subdev_info em_x270_da9030_subdevs[] = {
                .name = "da903x-regulator",
                .id = DA9030_ID_LDO5,
                .platform_data = &ldo5_data,
+       }, {
+               .name = "da903x-regulator",
+               .id = DA9030_ID_LDO10,
+               .platform_data = &ldo10_data,
        }, {
                .name = "da903x-regulator",
                .id = DA9030_ID_LDO12,