]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] EDAC: i82875p cleanup
authorDave Peterson <dsp@llnl.gov>
Sun, 26 Mar 2006 09:38:44 +0000 (01:38 -0800)
committerLinus Torvalds <torvalds@g5.osdl.org>
Sun, 26 Mar 2006 16:57:07 +0000 (08:57 -0800)
- Fix i82875p_probe1() so it calls pci_get_device() instead of
  pci_find_device().
- Fix i82875p_probe1() so it cleans up properly on failure.
- Fix i82875p_init() so it cleans up properly on failure.

Signed-off-by: David S. Peterson <dsp@llnl.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/edac/i82875p_edac.c

index a547c30473e49505bd1238db0e20290d26a028e2..c521178183de20bdb983a758363356c4c9ffcc7c 100644 (file)
@@ -289,7 +289,7 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
 
        debugf0("%s()\n", __func__);
 
-       ovrfl_pdev = pci_find_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
+       ovrfl_pdev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
 
        if (!ovrfl_pdev) {
                /*
@@ -302,26 +302,26 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
                ovrfl_pdev =
                    pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0));
                if (!ovrfl_pdev)
-                       goto fail;
+                       return -ENODEV;
        }
 #ifdef CONFIG_PROC_FS
        if (!ovrfl_pdev->procent && pci_proc_attach_device(ovrfl_pdev)) {
                i82875p_printk(KERN_ERR,
                               "%s(): Failed to attach overflow device\n",
                               __func__);
-               goto fail;
+               return -ENODEV;
        }
 #endif                         /* CONFIG_PROC_FS */
        if (pci_enable_device(ovrfl_pdev)) {
                i82875p_printk(KERN_ERR,
                               "%s(): Failed to enable overflow device\n",
                               __func__);
-               goto fail;
+               return -ENODEV;
        }
 
        if (pci_request_regions(ovrfl_pdev, pci_name(ovrfl_pdev))) {
 #ifdef CORRECT_BIOS
-               goto fail;
+               goto fail0;
 #endif
        }
        /* cache is irrelevant for PCI bus reads/writes */
@@ -331,7 +331,7 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
        if (!ovrfl_window) {
                i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n",
                               __func__);
-               goto fail;
+               goto fail1;
        }
 
        /* need to find out the number of channels */
@@ -345,7 +345,7 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
 
        if (!mci) {
                rc = -ENOMEM;
-               goto fail;
+               goto fail2;
        }
 
        debugf3("%s(): init mci\n", __func__);
@@ -402,25 +402,26 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
 
        if (edac_mc_add_mc(mci)) {
                debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
-               goto fail;
+               goto fail3;
        }
 
        /* get this far and it's successful */
        debugf3("%s(): success\n", __func__);
        return 0;
 
-      fail:
-       if (mci)
-               edac_mc_free(mci);
+fail3:
+       edac_mc_free(mci);
 
-       if (ovrfl_window)
-               iounmap(ovrfl_window);
+fail2:
+       iounmap(ovrfl_window);
 
-       if (ovrfl_pdev) {
-               pci_release_regions(ovrfl_pdev);
-               pci_disable_device(ovrfl_pdev);
-       }
+fail1:
+       pci_release_regions(ovrfl_pdev);
 
+#ifdef CORRECT_BIOS
+fail0:
+#endif
+       pci_disable_device(ovrfl_pdev);
        /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */
        return rc;
 }
@@ -497,24 +498,33 @@ static int __init i82875p_init(void)
        debugf3("%s()\n", __func__);
        pci_rc = pci_register_driver(&i82875p_driver);
        if (pci_rc < 0)
-               return pci_rc;
+               goto fail0;
        if (mci_pdev == NULL) {
-               i82875p_registered = 0;
                mci_pdev =
                    pci_get_device(PCI_VENDOR_ID_INTEL,
                                   PCI_DEVICE_ID_INTEL_82875_0, NULL);
                if (!mci_pdev) {
                        debugf0("875p pci_get_device fail\n");
-                       return -ENODEV;
+                       pci_rc = -ENODEV;
+                       goto fail1;
                }
                pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl);
                if (pci_rc < 0) {
                        debugf0("875p init fail\n");
-                       pci_dev_put(mci_pdev);
-                       return -ENODEV;
+                       pci_rc = -ENODEV;
+                       goto fail1;
                }
        }
        return 0;
+
+fail1:
+       pci_unregister_driver(&i82875p_driver);
+
+fail0:
+       if (mci_pdev != NULL)
+               pci_dev_put(mci_pdev);
+
+       return pci_rc;
 }