]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
tx4938ide: Check minimum cycle time and SHWT range (v2)
authorAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Sun, 2 Nov 2008 20:40:09 +0000 (21:40 +0100)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Sun, 2 Nov 2008 20:40:09 +0000 (21:40 +0100)
SHWT value is used as address valid to -CSx assertion and -CSx to -DIOx
assertion setup time, and contrarywise, -DIOx to -CSx release and -CSx
release to address invalid hold time, so it actualy applies 4 times and
so constitutes -DIOx recovery time.  Check requirement of the recovery
time and cycle time.  Also check SHWT maximum value.

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: ralf@linux-mips.org
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/tx4938ide.c

index fa660f931a117a0477c782a57dc9af0f3aa91309..9c518e722707cd9cec94f5528e1cbe14648da757 100644 (file)
@@ -39,10 +39,17 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch,
        /* Address-valid to DIOR/DIOW setup */
        shwt = DIV_ROUND_UP(t->setup, cycle);
 
+       /* -DIOx recovery time (SHWT * 4) and cycle time requirement */
+       while ((shwt * 4 + wt + (wt ? 2 : 3)) * cycle < t->cycle)
+               shwt++;
+       if (shwt > 7) {
+               pr_warning("tx4938ide: SHWT violation (%d)\n", shwt);
+               shwt = 7;
+       }
        pr_debug("tx4938ide: ebus %d, bus cycle %dns, WT %d, SHWT %d\n",
                 ebus_ch, cycle, wt, shwt);
 
-       __raw_writeq((cr & ~(0x3f007ull)) | (wt << 12) | shwt,
+       __raw_writeq((cr & ~0x3f007ull) | (wt << 12) | shwt,
                     &tx4938_ebuscptr->cr[ebus_ch]);
 }