]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
ACPI: cpufreq: Remove deprecated /proc/acpi/processor/../performance proc entries
authorThomas Renninger <trenn@suse.de>
Tue, 3 Feb 2009 16:46:46 +0000 (17:46 +0100)
committerLen Brown <len.brown@intel.com>
Wed, 4 Feb 2009 05:12:24 +0000 (00:12 -0500)
They were long enough set deprecated...

Update Documentation/cpu-freq/users-guide.txt:
The deprecated files listed there seen not to exist for some time anymore
already.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Documentation/cpu-freq/user-guide.txt
arch/x86/kernel/cpu/cpufreq/Kconfig
drivers/acpi/processor_perflib.c

index e3443ddcfb890028cc8f1a9576a029c35d200154..917918f84fc75ac09061be1f1f242159823983cf 100644 (file)
@@ -195,19 +195,3 @@ scaling_setspeed.          By "echoing" a new frequency into this
                                you can change the speed of the CPU,
                                but only within the limits of
                                scaling_min_freq and scaling_max_freq.
-                               
-
-3.2 Deprecated Interfaces
--------------------------
-
-Depending on your kernel configuration, you might find the following 
-cpufreq-related files:
-/proc/cpufreq
-/proc/sys/cpu/*/speed
-/proc/sys/cpu/*/speed-min
-/proc/sys/cpu/*/speed-max
-
-These are files for deprecated interfaces to cpufreq, which offer far
-less functionality. Because of this, these interfaces aren't described
-here.
-
index efae3b22a0ff7deda3b211f482553ec5feda43a7..65792c2cc4625f7c44337ddb043bbcd92090aee5 100644 (file)
@@ -245,17 +245,6 @@ config X86_E_POWERSAVER
 
 comment "shared options"
 
-config X86_ACPI_CPUFREQ_PROC_INTF
-       bool "/proc/acpi/processor/../performance interface (deprecated)"
-       depends on PROC_FS
-       depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
-       help
-         This enables the deprecated /proc/acpi/processor/../performance
-         interface. While it is helpful for debugging, the generic,
-         cross-architecture cpufreq interfaces should be used.
-
-         If in doubt, say N.
-
 config X86_SPEEDSTEP_LIB
        tristate
        default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)
index 846e227592d48770787672223a4c37c37ec6468c..9cc769b587ff7bbe061ae0c5ab5cc66d67e62ae5 100644 (file)
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/mutex.h>
-
-#include <asm/uaccess.h>
-#endif
-
 #ifdef CONFIG_X86
 #include <asm/cpufeature.h>
 #endif
@@ -434,96 +426,6 @@ int acpi_processor_notify_smm(struct module *calling_module)
 
 EXPORT_SYMBOL(acpi_processor_notify_smm);
 
-#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF
-/* /proc/acpi/processor/../performance interface (DEPRECATED) */
-
-static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file);
-static struct file_operations acpi_processor_perf_fops = {
-       .owner = THIS_MODULE,
-       .open = acpi_processor_perf_open_fs,
-       .read = seq_read,
-       .llseek = seq_lseek,
-       .release = single_release,
-};
-
-static int acpi_processor_perf_seq_show(struct seq_file *seq, void *offset)
-{
-       struct acpi_processor *pr = seq->private;
-       int i;
-
-
-       if (!pr)
-               goto end;
-
-       if (!pr->performance) {
-               seq_puts(seq, "<not supported>\n");
-               goto end;
-       }
-
-       seq_printf(seq, "state count:             %d\n"
-                  "active state:            P%d\n",
-                  pr->performance->state_count, pr->performance->state);
-
-       seq_puts(seq, "states:\n");
-       for (i = 0; i < pr->performance->state_count; i++)
-               seq_printf(seq,
-                          "   %cP%d:                  %d MHz, %d mW, %d uS\n",
-                          (i == pr->performance->state ? '*' : ' '), i,
-                          (u32) pr->performance->states[i].core_frequency,
-                          (u32) pr->performance->states[i].power,
-                          (u32) pr->performance->states[i].transition_latency);
-
-      end:
-       return 0;
-}
-
-static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file)
-{
-       return single_open(file, acpi_processor_perf_seq_show,
-                          PDE(inode)->data);
-}
-
-static void acpi_cpufreq_add_file(struct acpi_processor *pr)
-{
-       struct acpi_device *device = NULL;
-
-
-       if (acpi_bus_get_device(pr->handle, &device))
-               return;
-
-       /* add file 'performance' [R/W] */
-       proc_create_data(ACPI_PROCESSOR_FILE_PERFORMANCE, S_IFREG | S_IRUGO,
-                        acpi_device_dir(device),
-                        &acpi_processor_perf_fops, acpi_driver_data(device));
-       return;
-}
-
-static void acpi_cpufreq_remove_file(struct acpi_processor *pr)
-{
-       struct acpi_device *device = NULL;
-
-
-       if (acpi_bus_get_device(pr->handle, &device))
-               return;
-
-       /* remove file 'performance' */
-       remove_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE,
-                         acpi_device_dir(device));
-
-       return;
-}
-
-#else
-static void acpi_cpufreq_add_file(struct acpi_processor *pr)
-{
-       return;
-}
-static void acpi_cpufreq_remove_file(struct acpi_processor *pr)
-{
-       return;
-}
-#endif                         /* CONFIG_X86_ACPI_CPUFREQ_PROC_INTF */
-
 static int acpi_processor_get_psd(struct acpi_processor        *pr)
 {
        int result = 0;
@@ -747,14 +649,12 @@ err_ret:
 }
 EXPORT_SYMBOL(acpi_processor_preregister_performance);
 
-
 int
 acpi_processor_register_performance(struct acpi_processor_performance
                                    *performance, unsigned int cpu)
 {
        struct acpi_processor *pr;
 
-
        if (!(acpi_processor_ppc_status & PPC_REGISTERED))
                return -EINVAL;
 
@@ -781,8 +681,6 @@ acpi_processor_register_performance(struct acpi_processor_performance
                return -EIO;
        }
 
-       acpi_cpufreq_add_file(pr);
-
        mutex_unlock(&performance_mutex);
        return 0;
 }
@@ -795,7 +693,6 @@ acpi_processor_unregister_performance(struct acpi_processor_performance
 {
        struct acpi_processor *pr;
 
-
        mutex_lock(&performance_mutex);
 
        pr = per_cpu(processors, cpu);
@@ -808,8 +705,6 @@ acpi_processor_unregister_performance(struct acpi_processor_performance
                kfree(pr->performance->states);
        pr->performance = NULL;
 
-       acpi_cpufreq_remove_file(pr);
-
        mutex_unlock(&performance_mutex);
 
        return;