*
* - the master/host side Linux-USB kernel driver API;
* - the "usbfs" user space API; and
- * - (eventually) a Linux "gadget" slave/device side driver API.
+ * - the Linux "gadget" slave/device/peripheral side driver API.
*
* USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
* act either as a USB master/host or as a USB slave/device. That means
- * the master and slave side APIs will benefit from working well together.
+ * the master and slave side APIs benefit from working well together.
+ *
+ * There's also "Wireless USB", using low power short range radios for
+ * peripheral interconnection but otherwise building on the USB framework.
*/
#ifndef __LINUX_USB_CH9_H
#define USB_REQ_SET_INTERFACE 0x0B
#define USB_REQ_SYNCH_FRAME 0x0C
+#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
+#define USB_REQ_GET_ENCRYPTION 0x0E
+#define USB_REQ_SET_HANDSHAKE 0x0F
+#define USB_REQ_GET_HANDSHAKE 0x10
+#define USB_REQ_SET_CONNECTION 0x11
+#define USB_REQ_SET_SECURITY_DATA 0x12
+#define USB_REQ_GET_SECURITY_DATA 0x13
+#define USB_REQ_SET_WUSB_DATA 0x14
+#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
+#define USB_REQ_LOOPBACK_DATA_READ 0x16
+#define USB_REQ_SET_INTERFACE_DS 0x17
+
/*
* USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
* are read as a bit array returned by USB_REQ_GET_STATUS. (So there
*/
#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
-#define USB_DEVICE_TEST_MODE 2 /* (high speed only) */
-#define USB_DEVICE_B_HNP_ENABLE 3 /* dev may initiate HNP */
-#define USB_DEVICE_A_HNP_SUPPORT 4 /* RH port supports HNP */
-#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* other RH port does */
+#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
+#define USB_DEVICE_BATTERY 2 /* (wireless) */
+#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
+#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
+#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
+#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
#define USB_DT_OTG 0x09
#define USB_DT_DEBUG 0x0a
#define USB_DT_INTERFACE_ASSOCIATION 0x0b
+/* these are from the Wireless USB spec */
+#define USB_DT_SECURITY 0x0c
+#define USB_DT_KEY 0x0d
+#define USB_DT_ENCRYPTION_TYPE 0x0e
+#define USB_DT_BOS 0x0f
+#define USB_DT_DEVICE_CAPABILITY 0x10
+#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
/* conventional codes for class-specific descriptors */
#define USB_DT_CS_DEVICE 0x21
#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
#define USB_CLASS_VIDEO 0x0e
+#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
#define USB_CLASS_APP_SPEC 0xfe
#define USB_CLASS_VENDOR_SPEC 0xff
#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */
#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */
#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
+#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */
/*-------------------------------------------------------------------------*/
#define USB_ENDPOINT_XFER_ISOC 1
#define USB_ENDPOINT_XFER_BULK 2
#define USB_ENDPOINT_XFER_INT 3
+#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
/*-------------------------------------------------------------------------*/
} __attribute__ ((packed));
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SECURITY: group of wireless security descriptors, including
+ * encryption types available for setting up a CC/association.
+ */
+struct usb_security_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumEncryptionTypes;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys
+ * may be retrieved.
+ */
+struct usb_key_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 tTKID[3];
+ __u8 bReserved;
+ __u8 bKeyData[0];
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */
+struct usb_encryption_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEncryptionType;
+#define USB_ENC_TYPE_UNSECURE 0
+#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */
+#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */
+#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */
+ __u8 bEncryptionValue; /* use in SET_ENCRYPTION */
+ __u8 bAuthKeyIndex;
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_BOS: group of wireless capabilities */
+struct usb_bos_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumDeviceCaps;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
+struct usb_dev_cap_header {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+};
+
+#define USB_CAP_TYPE_WIRELESS_USB 1
+
+struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+
+ __u8 bmAttributes;
+#define USB_WIRELESS_P2P_DRD (1 << 1)
+#define USB_WIRELESS_BEACON_MASK (3 << 2)
+#define USB_WIRELESS_BEACON_SELF (1 << 2)
+#define USB_WIRELESS_BEACON_DIRECTED (2 << 2)
+#define USB_WIRELESS_BEACON_NONE (3 << 2)
+ __le16 wPHYRates; /* bit rates, Mbps */
+#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */
+#define USB_WIRELESS_PHY_80 (1 << 1)
+#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */
+#define USB_WIRELESS_PHY_160 (1 << 3)
+#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */
+#define USB_WIRELESS_PHY_320 (1 << 5)
+#define USB_WIRELESS_PHY_400 (1 << 6)
+#define USB_WIRELESS_PHY_480 (1 << 7)
+ __u8 bmTFITXPowerInfo; /* TFI power levels */
+ __u8 bmFFITXPowerInfo; /* FFI power levels */
+ __le16 bmBandGroup;
+ __u8 bReserved;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
+ * each endpoint descriptor for a wireless device
+ */
+struct usb_wireless_ep_comp_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bMaxBurst;
+ __u8 bMaxSequence;
+ __le16 wMaxStreamDelay;
+ __le16 wOverTheAirPacketSize;
+ __u8 bOverTheAirInterval;
+ __u8 bmCompAttributes;
+#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */
+#define USB_ENDPOINT_SWITCH_NO 0
+#define USB_ENDPOINT_SWITCH_SWITCH 1
+#define USB_ENDPOINT_SWITCH_SCALE 2
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
+ * host and a device for connection set up, mutual authentication, and
+ * exchanging short lived session keys. The handshake depends on a CC.
+ */
+struct usb_handshake {
+ __u8 bMessageNumber;
+ __u8 bStatus;
+ __u8 tTKID[3];
+ __u8 bReserved;
+ __u8 CDID[16];
+ __u8 nonce[16];
+ __u8 MIC[8];
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
+ * A CC may also be set up using non-wireless secure channels (including
+ * wired USB!), and some devices may support CCs with multiple hosts.
+ */
+struct usb_connection_context {
+ __u8 CHID[16]; /* persistent host id */
+ __u8 CDID[16]; /* device id (unique w/in host context) */
+ __u8 CK[16]; /* connection key */
+};
+
/*-------------------------------------------------------------------------*/
/* USB 2.0 defines three speeds, here's how Linux identifies them */
enum usb_device_speed {
USB_SPEED_UNKNOWN = 0, /* enumerating */
USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
- USB_SPEED_HIGH /* usb 2.0 */
+ USB_SPEED_HIGH, /* usb 2.0 */
+ USB_SPEED_VARIABLE, /* wireless (usb 2.5) */
};
enum usb_device_state {
projects / linux-2.6-omap-h63xx.git / commitdiff