]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[SCSI] qla1280: always load microcode
authorChristoph Hellwig <hch@lst.de>
Mon, 4 Jul 2005 15:48:46 +0000 (17:48 +0200)
committerJames Bottomley <jejb@mulgrave.(none)>
Tue, 2 Aug 2005 16:43:49 +0000 (11:43 -0500)
we have the most recent microcode, make sure to always load it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
drivers/scsi/qla1280.c

index 3732230b2e3a878486f78929ef370096603c12ad..9f975f7c1ea806b4db858437f2cd58d1d9aba6a4 100644 (file)
@@ -1733,69 +1733,6 @@ qla1280_initialize_adapter(struct scsi_qla_host *ha)
        return status;
 }
 
-
-/*
- * ISP Firmware Test
- *      Checks if present version of RISC firmware is older than
- *      driver firmware.
- *
- * Input:
- *      ha = adapter block pointer.
- *
- * Returns:
- *      0 = firmware does not need to be loaded.
- */
-static int
-qla1280_isp_firmware(struct scsi_qla_host *ha)
-{
-       struct nvram *nv = (struct nvram *) ha->response_ring;
-       int status = 0;         /* dg 2/27 always loads RISC */
-       uint16_t mb[MAILBOX_REGISTER_COUNT];
-
-       ENTER("qla1280_isp_firmware");
-
-       dprintk(1, "scsi(%li): Determining if RISC is loaded\n", ha->host_no);
-
-       /* Bad NVRAM data, load RISC code. */
-       if (!ha->nvram_valid) {
-               ha->flags.disable_risc_code_load = 0;
-       } else
-               ha->flags.disable_risc_code_load =
-                       nv->cntr_flags_1.disable_loading_risc_code;
-
-       if (ha->flags.disable_risc_code_load) {
-               dprintk(3, "qla1280_isp_firmware: Telling RISC to verify "
-                       "checksum of loaded BIOS code.\n");
-
-               /* Verify checksum of loaded RISC code. */
-               mb[0] = MBC_VERIFY_CHECKSUM;
-               /* mb[1] = ql12_risc_code_addr01; */
-               mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
-
-               if (!(status =
-                     qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]))) {
-                       /* Start firmware execution. */
-                       dprintk(3, "qla1280_isp_firmware: Startng F/W "
-                               "execution.\n");
-
-                       mb[0] = MBC_EXECUTE_FIRMWARE;
-                       /* mb[1] = ql12_risc_code_addr01; */
-                       mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
-                       qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
-               } else
-                       printk(KERN_INFO "qla1280: RISC checksum failed.\n");
-       } else {
-               dprintk(1, "qla1280: NVRAM configured to load RISC load.\n");
-               status = 1;
-       }
-
-       if (status)
-               dprintk(2, "qla1280_isp_firmware: **** Load RISC code ****\n");
-
-       LEAVE("qla1280_isp_firmware");
-       return status;
-}
-
 /*
  * Chip diagnostics
  *      Test chip for proper operation.
@@ -2080,14 +2017,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
 static int
 qla1280_load_firmware(struct scsi_qla_host *ha)
 {
-       int err = -ENODEV;
-
-       /* If firmware needs to be loaded */
-       if (!qla1280_isp_firmware(ha)) {
-               printk(KERN_ERR "scsi(%li): isp_firmware() failed!\n",
-                               ha->host_no);
-               goto out;
-       }
+       int err;
 
        err = qla1280_chip_diag(ha);
        if (err)