Blackfin arch: protect only the SPI bus controller with CONFIG_SPI_BFIN

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index fa4f4e833e849fbebdeb929186e3d16570f7601c..5958eecefcf111b9bedd97863cb41b2965965edd 100644 (file)
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -451,9 +451,6 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) \
        || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -676,6 +673,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
@@ -1018,10 +1016,7 @@ static int __init stamp_init(void)
 #endif
 
        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-       spi_register_board_info(bfin_spi_board_info,
-                               ARRAY_SIZE(bfin_spi_board_info));
-#endif
+       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 9d28415163ea67064a1085a0b5c9c63e005a4560..079389cbd8591d89ee96a798251f745a38c7589f 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -87,9 +87,6 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
        {
@@ -189,6 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
        [0] = {
@@ -425,9 +423,7 @@ static int __init ezkit_init(void)
 {
        printk(KERN_INFO "%s(): registering device resources\n", __func__);
        platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index ec05b236dc3f766ab738cf7a8d0dcd997ce85454..13ae49515f73d3f70d8ffb83746cd1b22046e6a6 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -161,9 +161,6 @@ static struct platform_device stamp_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
        {
@@ -320,6 +317,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
        [0] = {
@@ -626,10 +624,8 @@ static int __init stamp_init(void)
        SSYNC();
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-       spi_register_board_info(bfin_spi_board_info,
-                               ARRAY_SIZE(bfin_spi_board_info));
-#endif
+       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
 #endif

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9a756d1f3d73f19f52c0688b834952d2baa716f0..671f9d67f23a33b34207c965cce9ec53f386345a 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -400,9 +400,6 @@ static struct platform_device stamp_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
 #if defined(CONFIG_MTD_M25P80) \
        || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -629,6 +626,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
@@ -939,10 +937,7 @@ static int __init stamp_init(void)
 #endif
 
        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-       spi_register_board_info(bfin_spi_board_info,
-                               ARRAY_SIZE(bfin_spi_board_info));
-#endif
+       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;

diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index d1682bb37509937646237df1bf6fa019995a5400..af7c211a580eaf0763f3765d0882d15f932f00dd 100644 (file)
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -412,8 +412,6 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
 #if defined(CONFIG_MTD_M25P80) \
        || defined(CONFIG_MTD_M25P80_MODULE)
 /* SPI flash chip (m25p16) */
@@ -481,7 +479,7 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
-static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
        || defined(CONFIG_MTD_M25P80_MODULE)
        {
@@ -527,6 +525,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = {
 #endif
 };
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
        [0] = {
@@ -800,10 +799,7 @@ static int __init ezkit_init(void)
 
        platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-       spi_register_board_info(bf54x_spi_board_info,
-                       ARRAY_SIZE(bf54x_spi_board_info));
-#endif
+       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
        return 0;
 }

diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 61d8f7648b247da40f771d252ecfd759c20e29bf..bc6feded8569760b66bb6b576e66e266341e8889 100644 (file)
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -280,7 +280,6 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif
 
-#ifdef CONFIG_SPI_BFIN
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
        || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
@@ -295,8 +294,8 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
        .bits_per_word = 8,
 };
 #endif
-#endif
 
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct resource bfin_spi0_resource[] = {
        [0] = {
@@ -327,6 +326,7 @@ static struct platform_device bfin_spi0_device = {
                .platform_data = &bfin_spi0_info, /* Passed to driver */
        },
 };
+#endif
 
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
@@ -537,10 +537,7 @@ static int __init ezkit_init(void)
        SSYNC();
 #endif
 
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-       spi_register_board_info(bfin_spi_board_info,
-                               ARRAY_SIZE(bfin_spi_board_info));
-#endif
+       spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;