[PATCH] m68knommu: memory register defines for 520x ColdFire CPU's

Here is a small patch to automatically detect the DRAM size on m520x.
It was generated against 2.6.17-uc0, and tested on an Intec 5208 dev board.

(This part of the patch if the memory register defines for the 520x
ColdFire CPU family - Greg).

Signed-off-by: Michael Broughton <mbobowik@telusplanet.net>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/include/asm-m68knommu/m520xsim.h b/include/asm-m68knommu/m520xsim.h
index 1dac22ea95ba635cc8f1ac83aa607809229efc89..49d016e6391a3417289bca0b79d1380e66e0ac76 100644 (file)
--- a/include/asm-m68knommu/m520xsim.h
+++ b/include/asm-m68knommu/m520xsim.h
@@ -31,6 +31,16 @@
 #define MCFINT_QSPI         31          /* Interrupt number for QSPI */
 #define MCFINT_PIT1         4           /* Interrupt number for PIT1 (PIT0 in processor) */
 
+/*
+ *  SDRAM configuration registers.
+ */
+#define MCFSIM_SDMR         0x000a8000 /* SDRAM Mode/Extended Mode Register */
+#define MCFSIM_SDCR         0x000a8004 /* SDRAM Control Register */
+#define MCFSIM_SDCFG1       0x000a8008 /* SDRAM Configuration Register 1 */
+#define MCFSIM_SDCFG2       0x000a800c /* SDRAM Configuration Register 2 */
+#define MCFSIM_SDCS0        0x000a8110 /* SDRAM Chip Select 0 Configuration */
+#define MCFSIM_SDCS1        0x000a8114 /* SDRAM Chip Select 1 Configuration */
+
 
 #define MCF_GPIO_PAR_UART                   (0xA4036)
 #define MCF_GPIO_PAR_FECI2C                 (0xA4033)
@@ -47,7 +57,7 @@
 
 #define ICR_INTRCONF           0x05
 #define MCFPIT_IMR             MCFINTC_IMRL
-#define MCFPIT_IMR_IBIT        (1 << MCFINT_PIT1)
+#define MCFPIT_IMR_IBIT                (1 << MCFINT_PIT1)
 
 /****************************************************************************/
 #endif  /* m520xsim_h */