]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
hwmon: (w83627ehf) Be more careful when changing VID input level
authorJean Delvare <khali@linux-fr.org>
Thu, 3 Jan 2008 12:33:31 +0000 (07:33 -0500)
committerMark M. Hoffman <mhoffman@lightlink.com>
Thu, 3 Jan 2008 12:33:31 +0000 (07:33 -0500)
The VID input level change has been reported to cause trouble. Be more
careful in this respect:
* Only change the level on the W83627EHF/EHG. The W83627DHG is more
  complex in this respect.
* Don't change the level if the VID pins are in output mode.
* Only set the level to TTL if VRM 9.x is used.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
drivers/hwmon/w83627ehf.c

index b15c6a998b7271aeb0f45ce21fa21be75be2cf2f..d5aa25ce5dbdc8251d05d384391c418070f80d9b 100644 (file)
@@ -1276,23 +1276,31 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 
        data->vrm = vid_which_vrm();
        superio_enter(sio_data->sioreg);
-       /* Set VID input sensibility if needed. In theory the BIOS should
-          have set it, but in practice it's not always the case. */
-       en_vrm10 = superio_inb(sio_data->sioreg, SIO_REG_EN_VRM10);
-       if ((en_vrm10 & 0x08) && data->vrm != 100) {
-               dev_warn(dev, "Setting VID input voltage to TTL\n");
-               superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10,
-                            en_vrm10 & ~0x08);
-       } else if (!(en_vrm10 & 0x08) && data->vrm == 100) {
-               dev_warn(dev, "Setting VID input voltage to VRM10\n");
-               superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10,
-                            en_vrm10 | 0x08);
-       }
        /* Read VID value */
        superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
-       if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80)
+       if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) {
+               /* Set VID input sensibility if needed. In theory the BIOS
+                  should have set it, but in practice it's not always the
+                  case. We only do it for the W83627EHF/EHG because the
+                  W83627DHG is more complex in this respect. */
+               if (sio_data->kind == w83627ehf) {
+                       en_vrm10 = superio_inb(sio_data->sioreg,
+                                              SIO_REG_EN_VRM10);
+                       if ((en_vrm10 & 0x08) && data->vrm == 90) {
+                               dev_warn(dev, "Setting VID input voltage to "
+                                        "TTL\n");
+                               superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10,
+                                            en_vrm10 & ~0x08);
+                       } else if (!(en_vrm10 & 0x08) && data->vrm == 100) {
+                               dev_warn(dev, "Setting VID input voltage to "
+                                        "VRM10\n");
+                               superio_outb(sio_data->sioreg, SIO_REG_EN_VRM10,
+                                            en_vrm10 | 0x08);
+                       }
+               }
+
                data->vid = superio_inb(sio_data->sioreg, SIO_REG_VID_DATA) & 0x3f;
-       else {
+       else {
                dev_info(dev, "VID pins in output mode, CPU VID not "
                         "available\n");
                data->vid = 0x3f;