Revert "x86/PCI: ACPI based PCI gap calculation"

This reverts commit 809d9a8f93bd8504dcc34b16bbfdfd1a8c9bb1ed.

This one isn't quite ready for prime time.  It needs more testing and
additional feedback from the ACPI guys.

diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index d1ffb570917430da779cbef859eab4a7159b3a3d..d95de2f199cdaf45c3b44663dc32ed884de98b1d 100644 (file)
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -4,7 +4,6 @@
 #include <linux/irq.h>
 #include <linux/dmi.h>
 #include <asm/numa.h>
-#include <asm/e820.h>
 #include "pci.h"
 
 struct pci_root_info {
@@ -15,11 +14,6 @@ struct pci_root_info {
        int busnum;
 };
 
-struct gap_info {
-       unsigned long gapstart;
-       unsigned long gapsize;
-};
-
 static acpi_status
 resource_to_addr(struct acpi_resource *resource,
                        struct acpi_resource_address64 *addr)
@@ -116,78 +110,6 @@ adjust_transparent_bridge_resources(struct pci_bus *bus)
        }
 }
 
-static acpi_status search_gap(struct acpi_resource *resource, void *data)
-{
-       struct acpi_resource_address64 addr;
-       acpi_status status;
-       struct gap_info *gap = data;
-       unsigned long long start_addr, end_addr;
-
-       status = resource_to_addr(resource, &addr);
-       if (ACPI_SUCCESS(status) &&
-           addr.resource_type == ACPI_MEMORY_RANGE &&
-           addr.address_length > gap->gapsize) {
-               start_addr = addr.minimum + addr.translation_offset;
-               /*
-                * We want space only in the 32bit address range
-                */
-               if (start_addr < UINT_MAX) {
-                       end_addr = start_addr + addr.address_length;
-                       e820_search_gap(&gap->gapstart, &gap->gapsize,
-                                       start_addr, end_addr);
-               }
-       }
-
-       return AE_OK;
-}
-
-/*
- * Search for a hole in the 32 bit address space for PCI to assign MMIO
- * resources, for hotplug or unconfigured resources.
- * We query the CRS object of the PCI root device to look for possible producer
- * resources in the tree and consider these while calulating the start address
- * for this hole.
- */
-static void pci_setup_gap(acpi_handle *handle)
-{
-       struct gap_info gap;
-       acpi_status status;
-
-       gap.gapstart = 0;
-       gap.gapsize = 0x400000;
-
-       status = acpi_walk_resources(handle, METHOD_NAME__CRS,
-                                    search_gap, &gap);
-
-       if (ACPI_SUCCESS(status)) {
-               unsigned long round;
-
-               if (!gap.gapstart) {
-                       printk(KERN_ERR "ACPI: Warning: Cannot find a gap "
-                                       "in the 32bit address range for PCI\n"
-                                       "ACPI: PCI devices may collide with "
-                                       "hotpluggable memory address range\n");
-               }
-               /*
-                * Round the gapstart, uses the same logic as in
-                * e820_gap_setup
-                */
-               round = 0x100000;
-               while ((gap.gapsize >> 4) > round)
-                       round += round;
-               /* Fun with two's complement */
-               pci_mem_start = (gap.gapstart + round) & -round;
-
-               printk(KERN_INFO "ACPI: PCI resources should "
-                               "start at %lx (gap: %lx:%lx)\n",
-                               pci_mem_start, gap.gapstart, gap.gapsize);
-       } else {
-               printk(KERN_ERR "ACPI: Error while searching for gap in "
-                               "the 32bit address range for PCI\n");
-       }
-}
-
-
 static void
 get_current_resources(struct acpi_device *device, int busnum,
                        int domain, struct pci_bus *bus)
@@ -293,8 +215,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 
        if (bus && (pci_probe & PCI_USE__CRS))
                get_current_resources(device, busnum, domain, bus);
-
-       pci_setup_gap(device->handle);
        return bus;
 }