module_param_named(mtu4096, ipath_mtu4096, uint, S_IRUGO);
MODULE_PARM_DESC(mtu4096, "enable MTU of 4096 bytes, if supported");
+static unsigned ipath_hol_timeout_ms = 13000;
+module_param_named(hol_timeout_ms, ipath_hol_timeout_ms, uint, S_IRUGO);
+MODULE_PARM_DESC(hol_timeout_ms,
+ "duration of user app suspension after link failure");
+
MODULE_LICENSE("GPL");
MODULE_AUTHOR("QLogic <support@pathscale.com>");
MODULE_DESCRIPTION("QLogic InfiniPath driver");
ipath_cdbg(VERBOSE, "Trying to move unit %u to %s, current ltstate "
"is %s\n", dd->ipath_unit,
what[linkcmd],
- ipath_ibcstatus_str[
- (ipath_read_kreg64
- (dd, dd->ipath_kregs->kr_ibcstatus) >>
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
- INFINIPATH_IBCS_LINKTRAININGSTATE_MASK]);
+ ipath_ibcstatus_str[ipath_ib_linktrstate(dd,
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus))]);
/* flush all queued sends when going to DOWN to be sure that
* they don't block MAD packets */
if (linkcmd == INFINIPATH_IBCC_LINKCMD_DOWN)
*/
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
ltstate = (val >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
- INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
- lstate = (val >> INFINIPATH_IBCS_LINKSTATE_SHIFT) &
- INFINIPATH_IBCS_LINKSTATE_MASK;
+ dd->ibcs_lts_mask;
+ lstate = (val >> dd->ibcs_ls_shift) & INFINIPATH_IBCS_LINKSTATE_MASK;
dd->ipath_f_setextled(dd, lstate, ltstate);
mod_timer(&dd->ipath_led_override_timer, jiffies + timeoff);
ipath_dbg("Shutting down the device\n");
+ ipath_hol_up(dd); /* make sure user processes aren't suspended */
+
dd->ipath_flags |= IPATH_LINKUNK;
dd->ipath_flags &= ~(IPATH_INITTED | IPATH_LINKDOWN |
IPATH_LINKINIT | IPATH_LINKARMED |
*/
dd->ipath_f_quiet_serdes(dd);
+ /* stop all the timers that might still be running */
+ del_timer_sync(&dd->ipath_hol_timer);
if (dd->ipath_stats_timer_active) {
del_timer_sync(&dd->ipath_stats_timer);
dd->ipath_stats_timer_active = 0;
return ret;
}
+/*
+ * send a signal to all the processes that have the driver open
+ * through the normal interfaces (i.e., everything other than diags
+ * interface). Returns number of signalled processes.
+ */
+static int ipath_signal_procs(struct ipath_devdata *dd, int sig)
+{
+ int i, sub, any = 0;
+ pid_t pid;
+
+ if (!dd->ipath_pd)
+ return 0;
+ for (i = 1; i < dd->ipath_cfgports; i++) {
+ if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt ||
+ !dd->ipath_pd[i]->port_pid)
+ continue;
+ pid = dd->ipath_pd[i]->port_pid;
+ dev_info(&dd->pcidev->dev, "context %d in use "
+ "(PID %u), sending signal %d\n",
+ i, pid, sig);
+ kill_proc(pid, sig, 1);
+ any++;
+ for (sub = 0; sub < INFINIPATH_MAX_SUBPORT; sub++) {
+ pid = dd->ipath_pd[i]->port_subpid[sub];
+ if (!pid)
+ continue;
+ dev_info(&dd->pcidev->dev, "sub-context "
+ "%d:%d in use (PID %u), sending "
+ "signal %d\n", i, sub, pid, sig);
+ kill_proc(pid, sig, 1);
+ any++;
+ }
+ }
+ return any;
+}
+
+static void ipath_hol_signal_down(struct ipath_devdata *dd)
+{
+ if (ipath_signal_procs(dd, SIGSTOP))
+ ipath_dbg("Stopped some processes\n");
+ ipath_cancel_sends(dd, 1);
+}
+
+
+static void ipath_hol_signal_up(struct ipath_devdata *dd)
+{
+ if (ipath_signal_procs(dd, SIGCONT))
+ ipath_dbg("Continued some processes\n");
+}
+
+/*
+ * link is down, stop any users processes, and flush pending sends
+ * to prevent HoL blocking, then start the HoL timer that
+ * periodically continues, then stop procs, so they can detect
+ * link down if they want, and do something about it.
+ * Timer may already be running, so use __mod_timer, not add_timer.
+ */
+void ipath_hol_down(struct ipath_devdata *dd)
+{
+ dd->ipath_hol_state = IPATH_HOL_DOWN;
+ ipath_hol_signal_down(dd);
+ dd->ipath_hol_next = IPATH_HOL_DOWNCONT;
+ dd->ipath_hol_timer.expires = jiffies +
+ msecs_to_jiffies(ipath_hol_timeout_ms);
+ __mod_timer(&dd->ipath_hol_timer, dd->ipath_hol_timer.expires);
+}
+
+/*
+ * link is up, continue any user processes, and ensure timer
+ * is a nop, if running. Let timer keep running, if set; it
+ * will nop when it sees the link is up
+ */
+void ipath_hol_up(struct ipath_devdata *dd)
+{
+ ipath_hol_signal_up(dd);
+ dd->ipath_hol_state = IPATH_HOL_UP;
+}
+
+/*
+ * toggle the running/not running state of user proceses
+ * to prevent HoL blocking on chip resources, but still allow
+ * user processes to do link down special case handling.
+ * Should only be called via the timer
+ */
+void ipath_hol_event(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
+
+ if (dd->ipath_hol_next == IPATH_HOL_DOWNSTOP
+ && dd->ipath_hol_state != IPATH_HOL_UP) {
+ dd->ipath_hol_next = IPATH_HOL_DOWNCONT;
+ ipath_dbg("Stopping processes\n");
+ ipath_hol_signal_down(dd);
+ } else { /* may do "extra" if also in ipath_hol_up() */
+ dd->ipath_hol_next = IPATH_HOL_DOWNSTOP;
+ ipath_dbg("Continuing processes\n");
+ ipath_hol_signal_up(dd);
+ }
+ if (dd->ipath_hol_state == IPATH_HOL_UP)
+ ipath_dbg("link's up, don't resched timer\n");
+ else {
+ dd->ipath_hol_timer.expires = jiffies +
+ msecs_to_jiffies(ipath_hol_timeout_ms);
+ __mod_timer(&dd->ipath_hol_timer,
+ dd->ipath_hol_timer.expires);
+ }
+}
+
int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv)
{
u64 val;
*/
#include <linux/pci.h>
+#include <linux/delay.h>
#include "ipath_kernel.h"
#include "ipath_verbs.h"
}
/* return the strings for the most common link states */
-static char *ib_linkstate(u32 linkstate)
+static char *ib_linkstate(struct ipath_devdata *dd, u64 ibcs)
{
char *ret;
+ u32 state;
- switch (linkstate) {
- case IPATH_IBSTATE_INIT:
+ state = ipath_ib_state(dd, ibcs);
+ if (state == dd->ib_init)
ret = "Init";
- break;
- case IPATH_IBSTATE_ARM:
+ else if (state == dd->ib_arm)
ret = "Arm";
- break;
- case IPATH_IBSTATE_ACTIVE:
+ else if (state == dd->ib_active)
ret = "Active";
- break;
- default:
+ else
ret = "Down";
- }
-
return ret;
}
}
static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
- ipath_err_t errs, int noprint)
+ ipath_err_t errs)
{
- u64 val;
- u32 ltstate, lstate;
+ u32 ltstate, lstate, ibstate, lastlstate;
+ u32 init = dd->ib_init;
+ u32 arm = dd->ib_arm;
+ u32 active = dd->ib_active;
+ const u64 ibcs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+
+ lstate = ipath_ib_linkstate(dd, ibcs); /* linkstate */
+ ibstate = ipath_ib_state(dd, ibcs);
+ /* linkstate at last interrupt */
+ lastlstate = ipath_ib_linkstate(dd, dd->ipath_lastibcstat);
+ ltstate = ipath_ib_linktrstate(dd, ibcs); /* linktrainingtate */
/*
- * even if diags are enabled, we want to notice LINKINIT, etc.
- * We just don't want to change the LED state, or
- * dd->ipath_kregs->kr_ibcctrl
+ * if linkstate transitions into INIT from any of the various down
+ * states, or if it transitions from any of the up (INIT or better)
+ * states into any of the down states (except link recovery), then
+ * call the chip-specific code to take appropriate actions.
*/
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
- lstate = val & IPATH_IBSTATE_MASK;
+ if (lstate >= INFINIPATH_IBCS_L_STATE_INIT &&
+ lastlstate == INFINIPATH_IBCS_L_STATE_DOWN) {
+ /* transitioned to UP */
+ if (dd->ipath_f_ib_updown(dd, 1, ibcs)) {
+ ipath_cdbg(LINKVERB, "LinkUp handled, skipped\n");
+ goto skip_ibchange; /* chip-code handled */
+ }
+ } else if ((lastlstate >= INFINIPATH_IBCS_L_STATE_INIT ||
+ (dd->ipath_flags & IPATH_IB_FORCE_NOTIFY)) &&
+ ltstate <= INFINIPATH_IBCS_LT_STATE_CFGDEBOUNCE &&
+ ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
+ int handled;
+ handled = dd->ipath_f_ib_updown(dd, 0, ibcs);
+ dd->ipath_flags &= ~IPATH_IB_FORCE_NOTIFY;
+ if (handled) {
+ ipath_cdbg(LINKVERB, "LinkDown handled, skipped\n");
+ goto skip_ibchange; /* chip-code handled */
+ }
+ }
/*
- * this is confusing enough when it happens that I want to always put it
- * on the console and in the logs. If it was a requested state change,
- * we'll have already cleared the flags, so we won't print this warning
+ * Significant enough to always print and get into logs, if it was
+ * unexpected. If it was a requested state change, we'll have
+ * already cleared the flags, so we won't print this warning
*/
- if ((lstate != IPATH_IBSTATE_ARM && lstate != IPATH_IBSTATE_ACTIVE)
- && (dd->ipath_flags & (IPATH_LINKARMED | IPATH_LINKACTIVE))) {
- dev_info(&dd->pcidev->dev, "Link state changed from %s to %s\n",
- (dd->ipath_flags & IPATH_LINKARMED) ? "ARM" : "ACTIVE",
- ib_linkstate(lstate));
- /*
- * Flush all queued sends when link went to DOWN or INIT,
- * to be sure that they don't block SMA and other MAD packets
- */
- ipath_cancel_sends(dd, 1);
- }
- else if (lstate == IPATH_IBSTATE_INIT || lstate == IPATH_IBSTATE_ARM ||
- lstate == IPATH_IBSTATE_ACTIVE) {
- /*
- * only print at SMA if there is a change, debug if not
- * (sometimes we want to know that, usually not).
- */
- if (lstate == ((unsigned) dd->ipath_lastibcstat
- & IPATH_IBSTATE_MASK)) {
- ipath_dbg("Status change intr but no change (%s)\n",
- ib_linkstate(lstate));
- }
- else
- ipath_cdbg(VERBOSE, "Unit %u link state %s, last "
- "was %s\n", dd->ipath_unit,
- ib_linkstate(lstate),
- ib_linkstate((unsigned)
- dd->ipath_lastibcstat
- & IPATH_IBSTATE_MASK));
- }
- else {
- lstate = dd->ipath_lastibcstat & IPATH_IBSTATE_MASK;
- if (lstate == IPATH_IBSTATE_INIT ||
- lstate == IPATH_IBSTATE_ARM ||
- lstate == IPATH_IBSTATE_ACTIVE)
- ipath_cdbg(VERBOSE, "Unit %u link state down"
- " (state 0x%x), from %s\n",
- dd->ipath_unit,
- (u32)val & IPATH_IBSTATE_MASK,
- ib_linkstate(lstate));
- else
- ipath_cdbg(VERBOSE, "Unit %u link state changed "
- "to 0x%x from down (%x)\n",
- dd->ipath_unit, (u32) val, lstate);
+ if ((ibstate != arm && ibstate != active) &&
+ (dd->ipath_flags & (IPATH_LINKARMED | IPATH_LINKACTIVE))) {
+ dev_info(&dd->pcidev->dev, "Link state changed from %s "
+ "to %s\n", (dd->ipath_flags & IPATH_LINKARMED) ?
+ "ARM" : "ACTIVE", ib_linkstate(dd, ibcs));
}
- ltstate = (val >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
- INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
- lstate = (val >> INFINIPATH_IBCS_LINKSTATE_SHIFT) &
- INFINIPATH_IBCS_LINKSTATE_MASK;
if (ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
ltstate == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
- u32 last_ltstate;
-
+ u32 lastlts;
+ lastlts = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat);
/*
- * Ignore cycling back and forth from Polling.Active
- * to Polling.Quiet while waiting for the other end of
- * the link to come up. We will cycle back and forth
- * between them if no cable is plugged in,
- * the other device is powered off or disabled, etc.
+ * Ignore cycling back and forth from Polling.Active to
+ * Polling.Quiet while waiting for the other end of the link
+ * to come up, except to try and decide if we are connected
+ * to a live IB device or not. We will cycle back and
+ * forth between them if no cable is plugged in, the other
+ * device is powered off or disabled, etc.
*/
- last_ltstate = (dd->ipath_lastibcstat >>
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT)
- & INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
- if (last_ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE
- || last_ltstate ==
- INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
- if (dd->ipath_ibpollcnt > 40) {
+ if (lastlts == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
+ lastlts == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
+ if (++dd->ipath_ibpollcnt == 40) {
dd->ipath_flags |= IPATH_NOCABLE;
*dd->ipath_statusp |=
IPATH_STATUS_IB_NOCABLE;
- } else
- dd->ipath_ibpollcnt++;
+ ipath_cdbg(LINKVERB, "Set NOCABLE\n");
+ }
+ ipath_cdbg(LINKVERB, "POLL change to %s (%x)\n",
+ ipath_ibcstatus_str[ltstate], ibstate);
goto skip_ibchange;
}
}
- dd->ipath_ibpollcnt = 0; /* some state other than 2 or 3 */
+
+ dd->ipath_ibpollcnt = 0; /* not poll*, now */
ipath_stats.sps_iblink++;
- if (ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
+
+ if (ibstate == init || ibstate == arm || ibstate == active) {
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_NOCABLE;
+ if (ibstate == init || ibstate == arm) {
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+ if (dd->ipath_flags & IPATH_LINKACTIVE)
+ signal_ib_event(dd, IB_EVENT_PORT_ERR);
+ }
+ if (ibstate == arm) {
+ dd->ipath_flags |= IPATH_LINKARMED;
+ dd->ipath_flags &= ~(IPATH_LINKUNK |
+ IPATH_LINKINIT | IPATH_LINKDOWN |
+ IPATH_LINKACTIVE | IPATH_NOCABLE);
+ ipath_hol_down(dd);
+ } else if (ibstate == init) {
+ /*
+ * set INIT and DOWN. Down is checked by
+ * most of the other code, but INIT is
+ * useful to know in a few places.
+ */
+ dd->ipath_flags |= IPATH_LINKINIT |
+ IPATH_LINKDOWN;
+ dd->ipath_flags &= ~(IPATH_LINKUNK |
+ IPATH_LINKARMED | IPATH_LINKACTIVE |
+ IPATH_NOCABLE);
+ ipath_hol_down(dd);
+ } else { /* active */
+ *dd->ipath_statusp |=
+ IPATH_STATUS_IB_READY | IPATH_STATUS_IB_CONF;
+ dd->ipath_flags |= IPATH_LINKACTIVE;
+ dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
+ | IPATH_LINKDOWN | IPATH_LINKARMED |
+ IPATH_NOCABLE);
+ signal_ib_event(dd, IB_EVENT_PORT_ACTIVE);
+ /* LED active not handled in chip _f_updown */
+ dd->ipath_f_setextled(dd, lstate, ltstate);
+ ipath_hol_up(dd);
+ }
+
+ /*
+ * print after we've already done the work, so as not to
+ * delay the state changes and notifications, for debugging
+ */
+ if (lstate == lastlstate)
+ ipath_cdbg(LINKVERB, "Unchanged from last: %s "
+ "(%x)\n", ib_linkstate(dd, ibcs), ibstate);
+ else
+ ipath_cdbg(VERBOSE, "Unit %u: link up to %s %s (%x)\n",
+ dd->ipath_unit, ib_linkstate(dd, ibcs),
+ ipath_ibcstatus_str[ltstate], ibstate);
+ } else { /* down */
if (dd->ipath_flags & IPATH_LINKACTIVE)
signal_ib_event(dd, IB_EVENT_PORT_ERR);
dd->ipath_flags |= IPATH_LINKDOWN;
IPATH_LINKARMED);
*dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
dd->ipath_lli_counter = 0;
- if (!noprint) {
- if (((dd->ipath_lastibcstat >>
- INFINIPATH_IBCS_LINKSTATE_SHIFT) &
- INFINIPATH_IBCS_LINKSTATE_MASK)
- == INFINIPATH_IBCS_L_STATE_ACTIVE)
- /* if from up to down be more vocal */
- ipath_cdbg(VERBOSE,
- "Unit %u link now down (%s)\n",
- dd->ipath_unit,
- ipath_ibcstatus_str[ltstate]);
- else
- ipath_cdbg(VERBOSE, "Unit %u link is "
- "down (%s)\n", dd->ipath_unit,
- ipath_ibcstatus_str[ltstate]);
- }
- dd->ipath_f_setextled(dd, lstate, ltstate);
- } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ACTIVE) {
- dd->ipath_flags |= IPATH_LINKACTIVE;
- dd->ipath_flags &=
- ~(IPATH_LINKUNK | IPATH_LINKINIT | IPATH_LINKDOWN |
- IPATH_LINKARMED | IPATH_NOCABLE);
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_NOCABLE;
- *dd->ipath_statusp |=
- IPATH_STATUS_IB_READY | IPATH_STATUS_IB_CONF;
- dd->ipath_f_setextled(dd, lstate, ltstate);
- signal_ib_event(dd, IB_EVENT_PORT_ACTIVE);
- } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_INIT) {
- if (dd->ipath_flags & IPATH_LINKACTIVE)
- signal_ib_event(dd, IB_EVENT_PORT_ERR);
- /*
- * set INIT and DOWN. Down is checked by most of the other
- * code, but INIT is useful to know in a few places.
- */
- dd->ipath_flags |= IPATH_LINKINIT | IPATH_LINKDOWN;
- dd->ipath_flags &=
- ~(IPATH_LINKUNK | IPATH_LINKACTIVE | IPATH_LINKARMED
- | IPATH_NOCABLE);
- *dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
- | IPATH_STATUS_IB_READY);
- dd->ipath_f_setextled(dd, lstate, ltstate);
- } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ARM) {
- if (dd->ipath_flags & IPATH_LINKACTIVE)
- signal_ib_event(dd, IB_EVENT_PORT_ERR);
- dd->ipath_flags |= IPATH_LINKARMED;
- dd->ipath_flags &=
- ~(IPATH_LINKUNK | IPATH_LINKDOWN | IPATH_LINKINIT |
- IPATH_LINKACTIVE | IPATH_NOCABLE);
- *dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
- | IPATH_STATUS_IB_READY);
- dd->ipath_f_setextled(dd, lstate, ltstate);
- } else {
- if (!noprint)
- ipath_dbg("IBstatuschange unit %u: %s (%x)\n",
- dd->ipath_unit,
- ipath_ibcstatus_str[ltstate], ltstate);
+ if (lastlstate != INFINIPATH_IBCS_L_STATE_DOWN)
+ ipath_cdbg(VERBOSE, "Unit %u link state down "
+ "(state 0x%x), from %s\n",
+ dd->ipath_unit, lstate,
+ ib_linkstate(dd, dd->ipath_lastibcstat));
+ else
+ ipath_cdbg(LINKVERB, "Unit %u link state changed "
+ "to %s (0x%x) from down (%x)\n",
+ dd->ipath_unit,
+ ipath_ibcstatus_str[ltstate],
+ ibstate, lastlstate);
}
+
skip_ibchange:
- dd->ipath_lastibcstat = val;
+ dd->ipath_lastibcstat = ibcs;
}
static void handle_supp_msgs(struct ipath_devdata *dd,
dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
| IPATH_LINKARMED | IPATH_LINKACTIVE);
*dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
- if (!noprint) {
- u64 st = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_ibcstatus);
- ipath_dbg("Lost link, link now down (%s)\n",
- ipath_ibcstatus_str[st & 0xf]);
- }
+ ipath_dbg("Lost link, link now down (%s)\n",
+ ipath_ibcstatus_str[ipath_read_kreg64(dd,
+ dd->ipath_kregs->kr_ibcstatus) & 0xf]);
}
if (errs & INFINIPATH_E_IBSTATUSCHANGED)
- handle_e_ibstatuschanged(dd, errs, noprint);
+ handle_e_ibstatuschanged(dd, errs);
if (errs & INFINIPATH_E_RESET) {
if (!noprint)
projects / linux-2.6-omap-h63xx.git / commitdiff