powerpc/mpc8313erdb: Add power management to the device tree.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index 3664fb5840266a551ef06986a27585fd03ed4b46..2a94ae0dc8b875c5c080e69c894838ca21545263 100644 (file)
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -109,18 +109,38 @@
                        reg = <0x200 0x100>;
                };
 
-               i2c@3000 {
+               sleep-nexus {
                        #address-cells = <1>;
-                       #size-cells = <0>;
-                       cell-index = <0>;
-                       compatible = "fsl-i2c";
-                       reg = <0x3000 0x100>;
-                       interrupts = <14 0x8>;
-                       interrupt-parent = <&ipic>;
-                       dfsrr;
-                       rtc@68 {
-                               compatible = "dallas,ds1339";
-                               reg = <0x68>;
+                       #size-cells = <1>;
+                       compatible = "simple-bus";
+                       sleep = <&pmc 0x03000000>;
+                       ranges;
+
+                       i2c@3000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               cell-index = <0>;
+                               compatible = "fsl-i2c";
+                               reg = <0x3000 0x100>;
+                               interrupts = <14 0x8>;
+                               interrupt-parent = <&ipic>;
+                               dfsrr;
+                               rtc@68 {
+                                       compatible = "dallas,ds1339";
+                                       reg = <0x68>;
+                               };
+                       };
+
+                       crypto@30000 {
+                               compatible = "fsl,sec2.2", "fsl,sec2.1",
+                                            "fsl,sec2.0";
+                               reg = <0x30000 0x10000>;
+                               interrupts = <11 0x8>;
+                               interrupt-parent = <&ipic>;
+                               fsl,num-channels = <1>;
+                               fsl,channel-fifo-len = <24>;
+                               fsl,exec-units-mask = <0x4c>;
+                               fsl,descriptor-types-mask = <0x0122003f>;
                        };
                };
 
@@ -188,37 +208,44 @@
                        interrupt-parent = <&ipic>;
                        interrupts = <38 0x8>;
                        phy_type = "utmi_wide";
+                       sleep = <&pmc 0x00300000>;
                };
 
-               mdio@24520 {
+               enet0: ethernet@24000 {
                        #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "fsl,gianfar-mdio";
-                       reg = <0x24520 0x20>;
-                       phy1: ethernet-phy@1 {
-                               interrupt-parent = <&ipic>;
-                               interrupts = <19 0x8>;
-                               reg = <0x1>;
-                               device_type = "ethernet-phy";
-                       };
-                       phy4: ethernet-phy@4 {
-                               interrupt-parent = <&ipic>;
-                               interrupts = <20 0x8>;
-                               reg = <0x4>;
-                               device_type = "ethernet-phy";
-                       };
-               };
+                       #size-cells = <1>;
+                       sleep = <&pmc 0x20000000>;
+                       ranges;
 
-               enet0: ethernet@24000 {
                        cell-index = <0>;
                        device_type = "network";
                        model = "eTSEC";
-                       compatible = "gianfar";
+                       compatible = "gianfar", "simple-bus";
                        reg = <0x24000 0x1000>;
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <37 0x8 36 0x8 35 0x8>;
                        interrupt-parent = <&ipic>;
                        phy-handle = < &phy1 >;
+                       fsl,magic-packet;
+
+                       mdio@24520 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "fsl,gianfar-mdio";
+                               reg = <0x24520 0x20>;
+                               phy1: ethernet-phy@1 {
+                                       interrupt-parent = <&ipic>;
+                                       interrupts = <19 0x8>;
+                                       reg = <0x1>;
+                                       device_type = "ethernet-phy";
+                               };
+                               phy4: ethernet-phy@4 {
+                                       interrupt-parent = <&ipic>;
+                                       interrupts = <20 0x8>;
+                                       reg = <0x4>;
+                                       device_type = "ethernet-phy";
+                               };
+                       };
                };
 
                enet1: ethernet@25000 {
@@ -231,6 +258,8 @@
                        interrupts = <34 0x8 33 0x8 32 0x8>;
                        interrupt-parent = <&ipic>;
                        phy-handle = < &phy4 >;
+                       sleep = <&pmc 0x10000000>;
+                       fsl,magic-packet;
                };
 
                serial0: serial@4500 {
@@ -253,17 +282,6 @@
                        interrupt-parent = <&ipic>;
                };
 
-               crypto@30000 {
-                       compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
-                       reg = <0x30000 0x10000>;
-                       interrupts = <11 0x8>;
-                       interrupt-parent = <&ipic>;
-                       fsl,num-channels = <1>;
-                       fsl,channel-fifo-len = <24>;
-                       fsl,exec-units-mask = <0x4c>;
-                       fsl,descriptor-types-mask = <0x0122003f>;
-               };
-
                /* IPIC
                 * interrupts cell = <intr #, sense>
                 * sense values match linux IORESOURCE_IRQ_* defines:
@@ -277,36 +295,119 @@
                        reg = <0x700 0x100>;
                        device_type = "ipic";
                };
+
+               pmc: power@b00 {
+                       compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+                       reg = <0xb00 0x100 0xa00 0x100>;
+                       interrupts = <80 8>;
+                       interrupt-parent = <&ipic>;
+                       fsl,mpc8313-wakeup-timer = <&gtm1>;
+
+                       /* Remove this (or change to "okay") if you have
+                        * a REVA3 or later board, if you apply one of the
+                        * workarounds listed in section 8.5 of the board
+                        * manual, or if you are adapting this device tree
+                        * to a different board.
+                        */
+                       status = "fail";
+               };
+
+               gtm1: timer@500 {
+                       compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+                       reg = <0x500 0x100>;
+                       interrupts = <90 8 78 8 84 8 72 8>;
+                       interrupt-parent = <&ipic>;
+               };
+
+               timer@600 {
+                       compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+                       reg = <0x600 0x100>;
+                       interrupts = <91 8 79 8 85 8 73 8>;
+                       interrupt-parent = <&ipic>;
+               };
        };
 
-       pci0: pci@e0008500 {
-               cell-index = <1>;
-               interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-               interrupt-map = <
-
-                               /* IDSEL 0x0E -mini PCI */
-                                0x7000 0x0 0x0 0x1 &ipic 18 0x8
-                                0x7000 0x0 0x0 0x2 &ipic 18 0x8
-                                0x7000 0x0 0x0 0x3 &ipic 18 0x8
-                                0x7000 0x0 0x0 0x4 &ipic 18 0x8
-
-                               /* IDSEL 0x0F - PCI slot */
-                                0x7800 0x0 0x0 0x1 &ipic 17 0x8
-                                0x7800 0x0 0x0 0x2 &ipic 18 0x8
-                                0x7800 0x0 0x0 0x3 &ipic 17 0x8
-                                0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
-               interrupt-parent = <&ipic>;
-               interrupts = <66 0x8>;
-               bus-range = <0x0 0x0>;
-               ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-                         0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-                         0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-               clock-frequency = <66666666>;
-               #interrupt-cells = <1>;
-               #size-cells = <2>;
-               #address-cells = <3>;
-               reg = <0xe0008500 0x100>;
-               compatible = "fsl,mpc8349-pci";
-               device_type = "pci";
+       sleep-nexus {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "simple-bus";
+               sleep = <&pmc 0x00010000>;
+               ranges;
+
+               pci0: pci@e0008500 {
+                       cell-index = <1>;
+                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+                       interrupt-map = <
+                                       /* IDSEL 0x0E -mini PCI */
+                                        0x7000 0x0 0x0 0x1 &ipic 18 0x8
+                                        0x7000 0x0 0x0 0x2 &ipic 18 0x8
+                                        0x7000 0x0 0x0 0x3 &ipic 18 0x8
+                                        0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+                                       /* IDSEL 0x0F - PCI slot */
+                                        0x7800 0x0 0x0 0x1 &ipic 17 0x8
+                                        0x7800 0x0 0x0 0x2 &ipic 18 0x8
+                                        0x7800 0x0 0x0 0x3 &ipic 17 0x8
+                                        0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+                       interrupt-parent = <&ipic>;
+                       interrupts = <66 0x8>;
+                       bus-range = <0x0 0x0>;
+                       ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+                                 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+                                 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+                       clock-frequency = <66666666>;
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       #address-cells = <3>;
+                       reg = <0xe0008500 0x100>;
+                       compatible = "fsl,mpc8349-pci";
+                       device_type = "pci";
+               };
+
+               dma@82a8 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+                       reg = <0xe00082a8 4>;
+                       ranges = <0 0xe0008100 0x1a8>;
+                       interrupt-parent = <&ipic>;
+                       interrupts = <71 8>;
+
+                       dma-channel@0 {
+                               compatible = "fsl,mpc8313-dma-channel",
+                                            "fsl,elo-dma-channel";
+                               reg = <0 0x28>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <71 8>;
+                               cell-index = <0>;
+                       };
+
+                       dma-channel@80 {
+                               compatible = "fsl,mpc8313-dma-channel",
+                                            "fsl,elo-dma-channel";
+                               reg = <0x80 0x28>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <71 8>;
+                               cell-index = <1>;
+                       };
+
+                       dma-channel@100 {
+                               compatible = "fsl,mpc8313-dma-channel",
+                                            "fsl,elo-dma-channel";
+                               reg = <0x100 0x28>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <71 8>;
+                               cell-index = <2>;
+                       };
+
+                       dma-channel@180 {
+                               compatible = "fsl,mpc8313-dma-channel",
+                                            "fsl,elo-dma-channel";
+                               reg = <0x180 0x28>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <71 8>;
+                               cell-index = <3>;
+                       };
+               };
        };
 };