regulator: regulator driver interface

This allows regulator drivers to register their regulators and provide
operations to the core. It also has a notifier call chain for propagating
regulator events to clients.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
new file mode 100644 (file)
index 0000000..1d712c7
--- /dev/null
+++ b/include/linux/regulator/driver.h
@@ -0,0 +1,99 @@
+/*
+ * driver.h -- SoC Regulator driver support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Driver Interface.
+ */
+
+#ifndef __LINUX_REGULATOR_DRIVER_H_
+#define __LINUX_REGULATOR_DRIVER_H_
+
+#include <linux/device.h>
+#include <linux/regulator/consumer.h>
+
+struct regulator_constraints;
+struct regulator_dev;
+
+/**
+ * struct regulator_ops - regulator operations.
+ *
+ * This struct describes regulator operations.
+ */
+struct regulator_ops {
+
+       /* get/set regulator voltage */
+       int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV);
+       int (*get_voltage) (struct regulator_dev *);
+
+       /* get/set regulator current  */
+       int (*set_current_limit) (struct regulator_dev *,
+                                int min_uA, int max_uA);
+       int (*get_current_limit) (struct regulator_dev *);
+
+       /* enable/disable regulator */
+       int (*enable) (struct regulator_dev *);
+       int (*disable) (struct regulator_dev *);
+       int (*is_enabled) (struct regulator_dev *);
+
+       /* get/set regulator operating mode (defined in regulator.h) */
+       int (*set_mode) (struct regulator_dev *, unsigned int mode);
+       unsigned int (*get_mode) (struct regulator_dev *);
+
+       /* get most efficient regulator operating mode for load */
+       unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
+                                         int output_uV, int load_uA);
+
+       /* the operations below are for configuration of regulator state when
+        * it's parent PMIC enters a global STANBY/HIBERNATE state */
+
+       /* set regulator suspend voltage */
+       int (*set_suspend_voltage) (struct regulator_dev *, int uV);
+
+       /* enable/disable regulator in suspend state */
+       int (*set_suspend_enable) (struct regulator_dev *);
+       int (*set_suspend_disable) (struct regulator_dev *);
+
+       /* set regulator suspend operating mode (defined in regulator.h) */
+       int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
+};
+
+/*
+ * Regulators can either control voltage or current.
+ */
+enum regulator_type {
+       REGULATOR_VOLTAGE,
+       REGULATOR_CURRENT,
+};
+
+/**
+ * struct regulator_desc - Regulator descriptor
+ *
+ */
+struct regulator_desc {
+       const char *name;
+       int id;
+       struct regulator_ops *ops;
+       int irq;
+       enum regulator_type type;
+       struct module *owner;
+};
+
+
+struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
+                                         void *reg_data);
+void regulator_unregister(struct regulator_dev *rdev);
+
+int regulator_notifier_call_chain(struct regulator_dev *rdev,
+                                 unsigned long event, void *data);
+
+void *rdev_get_drvdata(struct regulator_dev *rdev);
+int rdev_get_id(struct regulator_dev *rdev);
+
+#endif