i2c: i2c-mpc: use dev based printout function

This patch used the dev_dbg, dev_err, etc. functions for debug
and error output instead of printk and pr_debug.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 1215686bd3c20dd120e16ac39f7e7cbf26b5220d..9b38c92364640656d30e20c5887f0c43e56b48aa 100644 (file)
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -50,6 +50,7 @@
 #define CSR_RXAK 0x01
 
 struct mpc_i2c {
+       struct device *dev;
        void __iomem *base;
        u32 interrupt;
        wait_queue_head_t queue;
@@ -104,7 +105,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
                while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
                        schedule();
                        if (time_after(jiffies, orig_jiffies + timeout)) {
-                               pr_debug("I2C: timeout\n");
+                               dev_dbg(i2c->dev, "timeout\n");
                                writeccr(i2c, 0);
                                result = -EIO;
                                break;
@@ -118,7 +119,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
                        (i2c->interrupt & CSR_MIF), timeout);
 
                if (unlikely(!(i2c->interrupt & CSR_MIF))) {
-                       pr_debug("I2C: wait timeout\n");
+                       dev_dbg(i2c->dev, "wait timeout\n");
                        writeccr(i2c, 0);
                        result = -ETIMEDOUT;
                }
@@ -131,17 +132,17 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
                return result;
 
        if (!(x & CSR_MCF)) {
-               pr_debug("I2C: unfinished\n");
+               dev_dbg(i2c->dev, "unfinished\n");
                return -EIO;
        }
 
        if (x & CSR_MAL) {
-               pr_debug("I2C: MAL\n");
+               dev_dbg(i2c->dev, "MAL\n");
                return -EIO;
        }
 
        if (writing && (x & CSR_RXAK)) {
-               pr_debug("I2C: No RXAK\n");
+               dev_dbg(i2c->dev, "No RXAK\n");
                /* generate stop */
                writeccr(i2c, CCR_MEN);
                return -EIO;
@@ -263,12 +264,12 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
        /* Allow bus up to 1s to become not busy */
        while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
                if (signal_pending(current)) {
-                       pr_debug("I2C: Interrupted\n");
+                       dev_dbg(i2c->dev, "Interrupted\n");
                        writeccr(i2c, 0);
                        return -EINTR;
                }
                if (time_after(jiffies, orig_jiffies + HZ)) {
-                       pr_debug("I2C: timeout\n");
+                       dev_dbg(i2c->dev, "timeout\n");
                        if (readb(i2c->base + MPC_I2C_SR) ==
                            (CSR_MCF | CSR_MBB | CSR_RXAK))
                                mpc_i2c_fixup(i2c);
@@ -279,9 +280,10 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 
        for (i = 0; ret >= 0 && i < num; i++) {
                pmsg = &msgs[i];
-               pr_debug("Doing %s %d bytes to 0x%02x - %d of %d messages\n",
-                        pmsg->flags & I2C_M_RD ? "read" : "write",
-                        pmsg->len, pmsg->addr, i + 1, num);
+               dev_dbg(i2c->dev,
+                       "Doing %s %d bytes to 0x%02x - %d of %d messages\n",
+                       pmsg->flags & I2C_M_RD ? "read" : "write",
+                       pmsg->len, pmsg->addr, i + 1, num);
                if (pmsg->flags & I2C_M_RD)
                        ret =
                            mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
@@ -320,6 +322,8 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
        if (!i2c)
                return -ENOMEM;
 
+       i2c->dev = &op->dev; /* for debug and error output */
+
        if (of_get_property(op->node, "dfsrr", NULL))
                i2c->flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
 
@@ -331,7 +335,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
 
        i2c->base = of_iomap(op->node, 0);
        if (!i2c->base) {
-               printk(KERN_ERR "i2c-mpc - failed to map controller\n");
+               dev_err(i2c->dev, "failed to map controller\n");
                result = -ENOMEM;
                goto fail_map;
        }
@@ -341,8 +345,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
                result = request_irq(i2c->irq, mpc_i2c_isr,
                                     IRQF_SHARED, "i2c-mpc", i2c);
                if (result < 0) {
-                       printk(KERN_ERR
-                              "i2c-mpc - failed to attach interrupt\n");
+                       dev_err(i2c->dev, "failed to attach interrupt\n");
                        goto fail_request;
                }
        }
@@ -357,7 +360,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
 
        result = i2c_add_adapter(&i2c->adap);
        if (result < 0) {
-               printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
+               dev_err(i2c->dev, "failed to add adapter\n");
                goto fail_add;
        }
        of_register_i2c_devices(&i2c->adap, op->node);