powerpc/85xx/86xx: some refactoring for fsl_uli1575 code

- Get rid of uses_fsl_uli_m1575, it does not scale for all cases.
  Instead, let's explicitly use machine_is() for each fixup.
- Factor out MPC8610HPCD quirks to fsl_uli1575, and protect them with
  machine_is(). One step closer to multiplatform kernels.
- Actually use fsl_uli1575 on MPC8610HPCD, so RTC quirk will be applied.
- RTC quirk applies to all boards though, so no machine_is() checks.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 25f41cd2d33abad60d1fca7a1fb8501107bf2f5f..00c535806647993b6de07ff5e14eb5e06ddd109f 100644 (file)
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -115,7 +115,6 @@ void __init mpc85xx_ds_pic_init(void)
 
 #ifdef CONFIG_PCI
 static int primary_phb_addr;
-extern int uses_fsl_uli_m1575;
 extern int uli_exclude_device(struct pci_controller *hose,
                                u_char bus, u_char devfn);
 
@@ -161,7 +160,6 @@ static void __init mpc85xx_ds_setup_arch(void)
                }
        }
 
-       uses_fsl_uli_m1575 = 1;
        ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 

diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 8ce10b233cdef81fc8c35b1fabccfcc6695d780c..9355a52694314573d9960ccb292ef42d22b7e704 100644 (file)
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -27,6 +27,7 @@ config SBC8641D
 config MPC8610_HPCD
        bool "Freescale MPC8610 HPCD"
        select DEFAULT_UIMAGE
+       select FSL_ULI1575
        help
          This option enables support for the MPC8610 HPCD board.
 

diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 30725302884a53cc43e10fc8173057a6e6256839..5eedb710896e7568b8fc29cb1c78b1f7f5def81b 100644 (file)
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -58,93 +58,6 @@ static int __init mpc8610_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
-#ifdef CONFIG_PCI
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
-       u32 temp32;
-
-       /* Disable INTx */
-       pci_read_config_dword(dev, 0x48, &temp32);
-       pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
-
-       /* Enable sideband interrupt */
-       pci_read_config_dword(dev, 0x90, &temp32);
-       pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
-}
-
-static void __devinit quirk_uli5288(struct pci_dev *dev)
-{
-       unsigned char c;
-       unsigned short temp;
-
-       /* Interrupt Disable, Needed when SATA disabled */
-       pci_read_config_word(dev, PCI_COMMAND, &temp);
-       temp |= 1<<10;
-       pci_write_config_word(dev, PCI_COMMAND, temp);
-
-       pci_read_config_byte(dev, 0x83, &c);
-       c |= 0x80;
-       pci_write_config_byte(dev, 0x83, c);
-
-       pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
-       pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
-
-       pci_read_config_byte(dev, 0x83, &c);
-       c &= 0x7f;
-       pci_write_config_byte(dev, 0x83, c);
-}
-
-/*
- * Since 8259PIC was disabled on the board, the IDE device can not
- * use the legacy IRQ, we need to let the IDE device work under
- * native mode and use the interrupt line like other PCI devices.
- * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
- * as the interrupt for IDE device.
- */
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
-       unsigned char c;
-
-       pci_read_config_byte(dev, 0x4b, &c);
-       c |= 0x10;
-       pci_write_config_byte(dev, 0x4b, c);
-}
-
-/*
- * SATA interrupt pin bug fix
- * There's a chip bug for 5288, The interrupt pin should be 2,
- * not the read only value 1, So it use INTB#, not INTA# which
- * actually used by the IDE device 5229.
- * As of this bug, during the PCI initialization, 5288 read the
- * irq of IDE device from the device tree, this function fix this
- * bug by re-assigning a correct irq to 5288.
- *
- */
-static void __devinit final_uli5288(struct pci_dev *dev)
-{
-       struct pci_controller *hose = pci_bus_to_host(dev->bus);
-       struct device_node *hosenode = hose ? hose->dn : NULL;
-       struct of_irq oirq;
-       int virq, pin = 2;
-       u32 laddr[3];
-
-       if (!hosenode)
-               return;
-
-       laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
-       laddr[1] = laddr[2] = 0;
-       of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
-       virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-                                    oirq.size);
-       dev->irq = virq;
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288);
-#endif /* CONFIG_PCI */
-
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
 static u32 get_busfreq(void)

diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 7916599c9126c4a26f46900ba6434b96422727c6..f712d9c0991be7ef9c6c0cc3cdccec2e98e1094e 100644 (file)
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -45,7 +45,6 @@
 #endif
 
 #ifdef CONFIG_PCI
-extern int uses_fsl_uli_m1575;
 extern int uli_exclude_device(struct pci_controller *hose,
                                u_char bus, u_char devfn);
 
@@ -87,7 +86,6 @@ mpc86xx_hpcn_setup_arch(void)
                        fsl_add_bridge(np, 0);
        }
 
-       uses_fsl_uli_m1575 = 1;
        ppc_md.pci_exclude_device = mpc86xx_exclude_device;
 
 #endif

diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 756561c51597a44f6fbf2433e4de59929ca1b658..ef74a0763ec124a063c67992b99ac9e8f6d6f316 100644 (file)
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -51,15 +51,13 @@ u8 uli_pirq_to_irq[8] = {
        ULI_8259_NONE,          /* PIRQH */
 };
 
-/* set in board code if you want this quirks to do something */
-int uses_fsl_uli_m1575;
-
 /* Bridge */
 static void __devinit early_uli5249(struct pci_dev *dev)
 {
        unsigned char temp;
 
-       if (!uses_fsl_uli_m1575)
+       if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+                       !machine_is(mpc8572_ds))
                return;
 
        pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
@@ -82,7 +80,8 @@ static void __devinit quirk_uli1575(struct pci_dev *dev)
 {
        int i;
 
-       if (!uses_fsl_uli_m1575)
+       if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+                       !machine_is(mpc8572_ds))
                return;
 
        /*
@@ -150,7 +149,8 @@ static void __devinit quirk_final_uli1575(struct pci_dev *dev)
         * IRQ 14: Edge
         * IRQ 15: Edge
         */
-       if (!uses_fsl_uli_m1575)
+       if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+                       !machine_is(mpc8572_ds))
                return;
 
        outb(0xfa, 0x4d0);
@@ -176,7 +176,8 @@ static void __devinit quirk_uli5288(struct pci_dev *dev)
        unsigned char c;
        unsigned int d;
 
-       if (!uses_fsl_uli_m1575)
+       if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+                       !machine_is(mpc8572_ds))
                return;
 
        /* read/write lock */
@@ -200,7 +201,8 @@ static void __devinit quirk_uli5229(struct pci_dev *dev)
 {
        unsigned short temp;
 
-       if (!uses_fsl_uli_m1575)
+       if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+                       !machine_is(mpc8572_ds))
                return;
 
        pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
@@ -238,6 +240,103 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
 
+static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
+{
+       u32 temp32;
+
+       if (!machine_is(mpc86xx_hpcd))
+               return;
+
+       /* Disable INTx */
+       pci_read_config_dword(dev, 0x48, &temp32);
+       pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
+
+       /* Enable sideband interrupt */
+       pci_read_config_dword(dev, 0x90, &temp32);
+       pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
+}
+
+static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
+{
+       unsigned char c;
+       unsigned short temp;
+
+       if (!machine_is(mpc86xx_hpcd))
+               return;
+
+       /* Interrupt Disable, Needed when SATA disabled */
+       pci_read_config_word(dev, PCI_COMMAND, &temp);
+       temp |= 1<<10;
+       pci_write_config_word(dev, PCI_COMMAND, temp);
+
+       pci_read_config_byte(dev, 0x83, &c);
+       c |= 0x80;
+       pci_write_config_byte(dev, 0x83, c);
+
+       pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
+       pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
+
+       pci_read_config_byte(dev, 0x83, &c);
+       c &= 0x7f;
+       pci_write_config_byte(dev, 0x83, c);
+}
+
+/*
+ * Since 8259PIC was disabled on the board, the IDE device can not
+ * use the legacy IRQ, we need to let the IDE device work under
+ * native mode and use the interrupt line like other PCI devices.
+ * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
+ * as the interrupt for IDE device.
+ */
+static void __devinit hpcd_quirk_uli5229(struct pci_dev *dev)
+{
+       unsigned char c;
+
+       if (!machine_is(mpc86xx_hpcd))
+               return;
+
+       pci_read_config_byte(dev, 0x4b, &c);
+       c |= 0x10;
+       pci_write_config_byte(dev, 0x4b, c);
+}
+
+/*
+ * SATA interrupt pin bug fix
+ * There's a chip bug for 5288, The interrupt pin should be 2,
+ * not the read only value 1, So it use INTB#, not INTA# which
+ * actually used by the IDE device 5229.
+ * As of this bug, during the PCI initialization, 5288 read the
+ * irq of IDE device from the device tree, this function fix this
+ * bug by re-assigning a correct irq to 5288.
+ *
+ */
+static void __devinit hpcd_final_uli5288(struct pci_dev *dev)
+{
+       struct pci_controller *hose = pci_bus_to_host(dev->bus);
+       struct device_node *hosenode = hose ? hose->dn : NULL;
+       struct of_irq oirq;
+       int virq, pin = 2;
+       u32 laddr[3];
+
+       if (!machine_is(mpc86xx_hpcd))
+               return;
+
+       if (!hosenode)
+               return;
+
+       laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
+       laddr[1] = laddr[2] = 0;
+       of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
+       virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+                                    oirq.size);
+       dev->irq = virq;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
+
 int uli_exclude_device(struct pci_controller *hose,
                        u_char bus, u_char devfn)
 {