sky2: memory barriers change

Do some memory barrier changes for safety/perfomance:
Don't need read after update to index, mmiowb() followed by read at end
of irq is sufficient.

Signed-off-by: Stephn Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index ccbd8c2674b0ed128f8520bc9d990af2c254dd7b..832fd69a0e59b155f4b28fbf5d502ce363d087b8 100644 (file)
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -844,10 +844,12 @@ static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2,
 /* Update chip's next pointer */
 static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
 {
-       q = Y2_QADDR(q, PREF_UNIT_PUT_IDX);
+       /* Make sure write' to descriptors are complete before we tell hardware */
        wmb();
-       sky2_write16(hw, q, idx);
-       sky2_read16(hw, q);
+       sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx);
+
+       /* Synchronize I/O on since next processor may write to tail */
+       mmiowb();
 }
 
 
@@ -979,6 +981,7 @@ stopped:
 
        /* reset the Rx prefetch unit */
        sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
+       mmiowb();
 }
 
 /* Clean out receive buffer area, assumes receiver hardware stopped */
@@ -1198,7 +1201,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
        }
 
        /* Tell chip about available buffers */
-       sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
+       sky2_put_idx(hw, rxq, sky2->rx_put);
        return 0;
 nomem:
        sky2_rx_clean(sky2);
@@ -1540,6 +1543,8 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
        }
 
        sky2->tx_cons = idx;
+       smp_mb();
+
        if (tx_avail(sky2) > MAX_SKB_TX_LE + 4)
                netif_wake_queue(dev);
 }
@@ -2218,6 +2223,7 @@ force_update:
 
        /* Fully processed status ring so clear irq */
        sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
+       mmiowb();
 
 exit_loop:
        if (buf_write[0]) {
@@ -2442,6 +2448,7 @@ static int sky2_poll(struct net_device *dev0, int *budget)
        if (work_done < work_limit) {
                netif_rx_complete(dev0);
 
+               /* end of interrupt, re-enables also acts as I/O synchronization */
                sky2_read32(hw, B0_Y2_SP_LISR);
                return 0;
        } else {