* MP-table.
*/
#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
-int mp_bus_id_to_type [MAX_MP_BUSSES];
+int mp_bus_id_to_type[MAX_MP_BUSSES];
#endif
DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
+int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 };
static int mp_current_pci_id;
int pic_mode;
* Intel MP BIOS table parsing routines:
*/
-
/*
* Checksum an MP configuration block.
*/
* doing this ....
*/
-static int mpc_record;
-static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata;
+static int mpc_record;
+static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
+ __cpuinitdata;
#endif
static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
disabled_cpus++;
return;
}
-
#ifdef CONFIG_X86_NUMAQ
apicid = mpc_apic_id(m, translation_table[mpc_record]);
#else
Dprintk("Processor #%d %u:%u APIC version %d\n",
m->mpc_apicid,
(m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
- m->mpc_apicver);
+ (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4, m->mpc_apicver);
apicid = m->mpc_apicid;
#endif
- if (m->mpc_featureflag&(1<<0))
+ if (m->mpc_featureflag & (1 << 0))
Dprintk(" Floating point unit present.\n");
- if (m->mpc_featureflag&(1<<7))
+ if (m->mpc_featureflag & (1 << 7))
Dprintk(" Machine Exception supported.\n");
- if (m->mpc_featureflag&(1<<8))
+ if (m->mpc_featureflag & (1 << 8))
Dprintk(" 64 bit compare & exchange supported.\n");
- if (m->mpc_featureflag&(1<<9))
+ if (m->mpc_featureflag & (1 << 9))
Dprintk(" Internal APIC present.\n");
- if (m->mpc_featureflag&(1<<11))
+ if (m->mpc_featureflag & (1 << 11))
Dprintk(" SEP present.\n");
- if (m->mpc_featureflag&(1<<12))
+ if (m->mpc_featureflag & (1 << 12))
Dprintk(" MTRR present.\n");
- if (m->mpc_featureflag&(1<<13))
+ if (m->mpc_featureflag & (1 << 13))
Dprintk(" PGE present.\n");
- if (m->mpc_featureflag&(1<<14))
+ if (m->mpc_featureflag & (1 << 14))
Dprintk(" MCA present.\n");
- if (m->mpc_featureflag&(1<<15))
+ if (m->mpc_featureflag & (1 << 15))
Dprintk(" CMOV present.\n");
- if (m->mpc_featureflag&(1<<16))
+ if (m->mpc_featureflag & (1 << 16))
Dprintk(" PAT present.\n");
- if (m->mpc_featureflag&(1<<17))
+ if (m->mpc_featureflag & (1 << 17))
Dprintk(" PSE present.\n");
- if (m->mpc_featureflag&(1<<18))
+ if (m->mpc_featureflag & (1 << 18))
Dprintk(" PSN present.\n");
- if (m->mpc_featureflag&(1<<19))
+ if (m->mpc_featureflag & (1 << 19))
Dprintk(" Cache Line Flush Instruction present.\n");
/* 20 Reserved */
- if (m->mpc_featureflag&(1<<21))
+ if (m->mpc_featureflag & (1 << 21))
Dprintk(" Debug Trace and EMON Store present.\n");
- if (m->mpc_featureflag&(1<<22))
+ if (m->mpc_featureflag & (1 << 22))
Dprintk(" ACPI Thermal Throttle Registers present.\n");
- if (m->mpc_featureflag&(1<<23))
+ if (m->mpc_featureflag & (1 << 23))
Dprintk(" MMX present.\n");
- if (m->mpc_featureflag&(1<<24))
+ if (m->mpc_featureflag & (1 << 24))
Dprintk(" FXSR present.\n");
- if (m->mpc_featureflag&(1<<25))
+ if (m->mpc_featureflag & (1 << 25))
Dprintk(" XMM present.\n");
- if (m->mpc_featureflag&(1<<26))
+ if (m->mpc_featureflag & (1 << 26))
Dprintk(" Willamette New Instructions present.\n");
- if (m->mpc_featureflag&(1<<27))
+ if (m->mpc_featureflag & (1 << 27))
Dprintk(" Self Snoop present.\n");
- if (m->mpc_featureflag&(1<<28))
+ if (m->mpc_featureflag & (1 << 28))
Dprintk(" HT present.\n");
- if (m->mpc_featureflag&(1<<29))
+ if (m->mpc_featureflag & (1 << 29))
Dprintk(" Thermal Monitor present.\n");
/* 30, 31 Reserved */
-
if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
Dprintk(" Bootup CPU\n");
boot_cpu_physical_apicid = m->mpc_apicid;
generic_processor_info(apicid, m->mpc_apicver);
}
-static void __init MP_bus_info (struct mpc_config_bus *m)
+static void __init MP_bus_info(struct mpc_config_bus *m)
{
char str[7];
#if MAX_MP_BUSSES < 256
if (m->mpc_busid >= MAX_MP_BUSSES) {
printk(KERN_WARNING "MP table busid value (%d) for bustype %s "
- " is too large, max. supported is %d\n",
- m->mpc_busid, str, MAX_MP_BUSSES - 1);
+ " is too large, max. supported is %d\n",
+ m->mpc_busid, str, MAX_MP_BUSSES - 1);
return;
}
#endif
set_bit(m->mpc_busid, mp_bus_not_pci);
- if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI)-1) == 0) {
+ if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
#ifdef CONFIG_X86_NUMAQ
mpc_oem_pci_bus(m, translation_table[mpc_record]);
#endif
mp_current_pci_id++;
#if defined(CONFIG_EISA) || defined (CONFIG_MCA)
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
- } else if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) {
+ } else if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
- } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) {
+ } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
- } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) {
+ } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA) - 1) == 0) {
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
} else {
printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
return 0;
}
-static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
+static void __init MP_ioapic_info(struct mpc_config_ioapic *m)
{
if (!(m->mpc_flags & MPC_APIC_USABLE))
return;
printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n",
- m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
+ m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
if (bad_ioapic(m->mpc_apicaddr))
return;
nr_ioapics++;
}
-static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
+static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
{
- mp_irqs [mp_irq_entries] = *m;
+ mp_irqs[mp_irq_entries] = *m;
Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
" IRQ %02x, APIC ID %x, APIC INT %02x\n",
- m->mpc_irqtype, m->mpc_irqflag & 3,
- (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
- m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
+ m->mpc_irqtype, m->mpc_irqflag & 3,
+ (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
+ m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
if (++mp_irq_entries == MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!!\n");
}
#endif
-static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
+static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
{
Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
- m->mpc_irqtype, m->mpc_irqflag & 3,
- (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
- m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
+ m->mpc_irqtype, m->mpc_irqflag & 3,
+ (m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid,
+ m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
}
#ifdef CONFIG_X86_NUMAQ
-static void __init MP_translation_info (struct mpc_config_translation *m)
+static void __init MP_translation_info(struct mpc_config_translation *m)
{
- printk(KERN_INFO "Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local);
+ printk(KERN_INFO
+ "Translation: record %d, type %d, quad %d, global %d, local %d\n",
+ mpc_record, m->trans_type, m->trans_quad, m->trans_global,
+ m->trans_local);
- if (mpc_record >= MAX_MPC_ENTRY)
+ if (mpc_record >= MAX_MPC_ENTRY)
printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
else
- translation_table[mpc_record] = m; /* stash this for later */
+ translation_table[mpc_record] = m; /* stash this for later */
if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
node_set_online(m->trans_quad);
}
* Read/parse the MPC oem tables
*/
-static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, \
- unsigned short oemsize)
+static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
+ unsigned short oemsize)
{
- int count = sizeof (*oemtable); /* the header size */
- unsigned char *oemptr = ((unsigned char *)oemtable)+count;
-
+ int count = sizeof(*oemtable); /* the header size */
+ unsigned char *oemptr = ((unsigned char *)oemtable) + count;
+
mpc_record = 0;
- printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
- if (memcmp(oemtable->oem_signature,MPC_OEM_SIGNATURE,4))
- {
- printk(KERN_WARNING "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
- oemtable->oem_signature[0],
- oemtable->oem_signature[1],
- oemtable->oem_signature[2],
- oemtable->oem_signature[3]);
+ printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
+ oemtable);
+ if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
+ printk(KERN_WARNING
+ "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+ oemtable->oem_signature[0], oemtable->oem_signature[1],
+ oemtable->oem_signature[2], oemtable->oem_signature[3]);
return;
}
- if (mpf_checksum((unsigned char *)oemtable,oemtable->oem_length))
- {
+ if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
return;
}
while (count < oemtable->oem_length) {
switch (*oemptr) {
- case MP_TRANSLATION:
+ case MP_TRANSLATION:
{
- struct mpc_config_translation *m=
- (struct mpc_config_translation *)oemptr;
+ struct mpc_config_translation *m =
+ (struct mpc_config_translation *)oemptr;
MP_translation_info(m);
oemptr += sizeof(*m);
count += sizeof(*m);
++mpc_record;
break;
}
- default:
+ default:
{
- printk(KERN_WARNING "Unrecognised OEM table entry type! - %d\n", (int) *oemptr);
+ printk(KERN_WARNING
+ "Unrecognised OEM table entry type! - %d\n",
+ (int)*oemptr);
return;
}
}
- }
+ }
}
static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
- char *productid)
+ char *productid)
{
if (strncmp(oem, "IBM NUMA", 8))
printk("Warning! May not be a NUMA-Q system!\n");
if (mpc->mpc_oemptr)
- smp_read_mpc_oem((struct mp_config_oemtable *) mpc->mpc_oemptr,
- mpc->mpc_oemsize);
+ smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr,
+ mpc->mpc_oemsize);
}
-#endif /* CONFIG_X86_NUMAQ */
+#endif /* CONFIG_X86_NUMAQ */
/*
* Read/parse the MPC
{
char str[16];
char oem[10];
- int count=sizeof(*mpc);
- unsigned char *mpt=((unsigned char *)mpc)+count;
+ int count = sizeof(*mpc);
+ unsigned char *mpt = ((unsigned char *)mpc) + count;
- if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
+ if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) {
printk(KERN_ERR "SMP mptable: bad signature [0x%x]!\n",
- *(u32 *)mpc->mpc_signature);
+ *(u32 *) mpc->mpc_signature);
return 0;
}
- if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
+ if (mpf_checksum((unsigned char *)mpc, mpc->mpc_length)) {
printk(KERN_ERR "SMP mptable: checksum error!\n");
return 0;
}
- if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
+ if (mpc->mpc_spec != 0x01 && mpc->mpc_spec != 0x04) {
printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n",
- mpc->mpc_spec);
+ mpc->mpc_spec);
return 0;
}
if (!mpc->mpc_lapic) {
printk(KERN_ERR "SMP mptable: null local APIC address!\n");
return 0;
}
- memcpy(oem,mpc->mpc_oem,8);
- oem[8]=0;
- printk(KERN_INFO "OEM ID: %s ",oem);
+ memcpy(oem, mpc->mpc_oem, 8);
+ oem[8] = 0;
+ printk(KERN_INFO "OEM ID: %s ", oem);
- memcpy(str,mpc->mpc_productid,12);
- str[12]=0;
- printk("Product ID: %s ",str);
+ memcpy(str, mpc->mpc_productid, 12);
+ str[12] = 0;
+ printk("Product ID: %s ", str);
mps_oem_check(mpc, oem, str);
mp_lapic_addr = mpc->mpc_lapic;
/*
- * Now process the configuration blocks.
+ * Now process the configuration blocks.
*/
#ifdef CONFIG_X86_NUMAQ
mpc_record = 0;
#endif
while (count < mpc->mpc_length) {
- switch(*mpt) {
- case MP_PROCESSOR:
+ switch (*mpt) {
+ case MP_PROCESSOR:
{
- struct mpc_config_processor *m=
- (struct mpc_config_processor *)mpt;
+ struct mpc_config_processor *m =
+ (struct mpc_config_processor *)mpt;
/* ACPI may have already provided this data */
if (!acpi_lapic)
MP_processor_info(m);
count += sizeof(*m);
break;
}
- case MP_BUS:
+ case MP_BUS:
{
- struct mpc_config_bus *m=
- (struct mpc_config_bus *)mpt;
+ struct mpc_config_bus *m =
+ (struct mpc_config_bus *)mpt;
MP_bus_info(m);
mpt += sizeof(*m);
count += sizeof(*m);
break;
}
- case MP_IOAPIC:
+ case MP_IOAPIC:
{
#ifdef CONFIG_X86_IO_APIC
- struct mpc_config_ioapic *m=
- (struct mpc_config_ioapic *)mpt;
+ struct mpc_config_ioapic *m =
+ (struct mpc_config_ioapic *)mpt;
MP_ioapic_info(m);
#endif
- mpt+=sizeof(struct mpc_config_ioapic);
- count+=sizeof(struct mpc_config_ioapic);
+ mpt += sizeof(struct mpc_config_ioapic);
+ count += sizeof(struct mpc_config_ioapic);
break;
}
- case MP_INTSRC:
+ case MP_INTSRC:
{
#ifdef CONFIG_X86_IO_APIC
- struct mpc_config_intsrc *m=
- (struct mpc_config_intsrc *)mpt;
+ struct mpc_config_intsrc *m =
+ (struct mpc_config_intsrc *)mpt;
MP_intsrc_info(m);
#endif
- mpt+=sizeof(struct mpc_config_intsrc);
- count+=sizeof(struct mpc_config_intsrc);
+ mpt += sizeof(struct mpc_config_intsrc);
+ count += sizeof(struct mpc_config_intsrc);
break;
}
- case MP_LINTSRC:
+ case MP_LINTSRC:
{
- struct mpc_config_lintsrc *m=
- (struct mpc_config_lintsrc *)mpt;
+ struct mpc_config_lintsrc *m =
+ (struct mpc_config_lintsrc *)mpt;
MP_lintsrc_info(m);
- mpt+=sizeof(*m);
- count+=sizeof(*m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
break;
}
- default:
+ default:
{
count = mpc->mpc_length;
break;
int ELCR_fallback = 0;
intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqflag = 0; /* conforming */
+ intsrc.mpc_irqflag = 0; /* conforming */
intsrc.mpc_srcbus = 0;
intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
* If it does, we assume it's valid.
*/
if (mpc_default_type == 5) {
- printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
+ printk(KERN_INFO
+ "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
- if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
- printk(KERN_WARNING "ELCR contains invalid data... not using ELCR\n");
+ if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2)
+ || ELCR_trigger(13))
+ printk(KERN_WARNING
+ "ELCR contains invalid data... not using ELCR\n");
else {
- printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
+ printk(KERN_INFO
+ "Using ELCR to identify PCI interrupts\n");
ELCR_fallback = 1;
}
}
}
intsrc.mpc_srcbusirq = i;
- intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
+ intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
MP_intsrc_info(&intsrc);
}
intsrc.mpc_irqtype = mp_ExtINT;
intsrc.mpc_srcbusirq = 0;
- intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
+ intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
MP_intsrc_info(&intsrc);
}
processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
processor.mpc_cpuflag = CPU_ENABLED;
processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
- (boot_cpu_data.x86_model << 4) |
- boot_cpu_data.x86_mask;
+ (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
processor.mpc_reserved[0] = 0;
processor.mpc_reserved[1] = 0;
bus.mpc_type = MP_BUS;
bus.mpc_busid = 0;
switch (mpc_default_type) {
- default:
- printk("???\n");
- printk(KERN_ERR "Unknown standard configuration %d\n",
- mpc_default_type);
- /* fall through */
- case 1:
- case 5:
- memcpy(bus.mpc_bustype, "ISA ", 6);
- break;
- case 2:
- case 6:
- case 3:
- memcpy(bus.mpc_bustype, "EISA ", 6);
- break;
- case 4:
- case 7:
- memcpy(bus.mpc_bustype, "MCA ", 6);
+ default:
+ printk("???\n");
+ printk(KERN_ERR "Unknown standard configuration %d\n",
+ mpc_default_type);
+ /* fall through */
+ case 1:
+ case 5:
+ memcpy(bus.mpc_bustype, "ISA ", 6);
+ break;
+ case 2:
+ case 6:
+ case 3:
+ memcpy(bus.mpc_bustype, "EISA ", 6);
+ break;
+ case 4:
+ case 7:
+ memcpy(bus.mpc_bustype, "MCA ", 6);
}
MP_bus_info(&bus);
if (mpc_default_type > 4) {
construct_default_ioirq_mptable(mpc_default_type);
#endif
lintsrc.mpc_type = MP_LINTSRC;
- lintsrc.mpc_irqflag = 0; /* conforming */
+ lintsrc.mpc_irqflag = 0; /* conforming */
lintsrc.mpc_srcbusid = 0;
lintsrc.mpc_srcbusirq = 0;
lintsrc.mpc_destapic = MP_APIC_ALL;
/*
* Scan the memory blocks for an SMP configuration block.
*/
-void __init get_smp_config (void)
+void __init get_smp_config(void)
{
struct intel_mp_floating *mpf = mpf_found;
/*
- * ACPI supports both logical (e.g. Hyper-Threading) and physical
+ * ACPI supports both logical (e.g. Hyper-Threading) and physical
* processors, where MPS only supports physical.
*/
if (acpi_lapic && acpi_ioapic) {
- printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n");
+ printk(KERN_INFO
+ "Using ACPI (MADT) for SMP configuration information\n");
return;
- }
- else if (acpi_lapic)
- printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
+ } else if (acpi_lapic)
+ printk(KERN_INFO
+ "Using ACPI for processor (LAPIC) configuration information\n");
- printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
- if (mpf->mpf_feature2 & (1<<7)) {
+ printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
+ mpf->mpf_specification);
+ if (mpf->mpf_feature2 & (1 << 7)) {
printk(KERN_INFO " IMCR and PIC compatibility mode.\n");
pic_mode = 1;
} else {
*/
if (mpf->mpf_feature1 != 0) {
- printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
+ printk(KERN_INFO "Default MP configuration #%d\n",
+ mpf->mpf_feature1);
construct_default_ISA_mptable(mpf->mpf_feature1);
} else if (mpf->mpf_physptr) {
*/
if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
smp_found_config = 0;
- printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
- printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
+ printk(KERN_ERR
+ "BIOS bug, MP table errors detected!...\n");
+ printk(KERN_ERR
+ "... disabling SMP support. (tell your hw vendor)\n");
return;
}
if (!mp_irq_entries) {
struct mpc_config_bus bus;
- printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
+ printk(KERN_ERR
+ "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
bus.mpc_type = MP_BUS;
bus.mpc_busid = 0;
*/
}
-static int __init smp_scan_config (unsigned long base, unsigned long length)
+static int __init smp_scan_config(unsigned long base, unsigned long length)
{
unsigned long *bp = phys_to_virt(base);
struct intel_mp_floating *mpf;
- printk(KERN_INFO "Scan SMP from %p for %ld bytes.\n", bp,length);
+ printk(KERN_INFO "Scan SMP from %p for %ld bytes.\n", bp, length);
if (sizeof(*mpf) != 16)
printk("Error: MPF size\n");
while (length > 0) {
mpf = (struct intel_mp_floating *)bp;
if ((*bp == SMP_MAGIC_IDENT) &&
- (mpf->mpf_length == 1) &&
- !mpf_checksum((unsigned char *)bp, 16) &&
- ((mpf->mpf_specification == 1)
- || (mpf->mpf_specification == 4)) ) {
+ (mpf->mpf_length == 1) &&
+ !mpf_checksum((unsigned char *)bp, 16) &&
+ ((mpf->mpf_specification == 1)
+ || (mpf->mpf_specification == 4))) {
smp_found_config = 1;
printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n",
- mpf, virt_to_phys(mpf));
+ mpf, virt_to_phys(mpf));
reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE,
BOOTMEM_DEFAULT);
if (mpf->mpf_physptr) {
return 0;
}
-void __init find_smp_config (void)
+void __init find_smp_config(void)
{
unsigned int address;
* 2) Scan the top 1K of base RAM
* 3) Scan the 64K of bios
*/
- if (smp_scan_config(0x0,0x400) ||
- smp_scan_config(639*0x400,0x400) ||
- smp_scan_config(0xF0000,0x10000))
+ if (smp_scan_config(0x0, 0x400) ||
+ smp_scan_config(639 * 0x400, 0x400) ||
+ smp_scan_config(0xF0000, 0x10000))
return;
/*
* If it is an SMP machine we should know now, unless the
extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
-static int mp_find_ioapic (int gsi)
+static int mp_find_ioapic(int gsi)
{
int i = 0;
/* Find the IOAPIC that manages this GSI. */
for (i = 0; i < nr_ioapics; i++) {
if ((gsi >= mp_ioapic_routing[i].gsi_base)
- && (gsi <= mp_ioapic_routing[i].gsi_end))
+ && (gsi <= mp_ioapic_routing[i].gsi_end))
return i;
}
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id);
mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
-
- /*
+
+ /*
* Build basic GSI lookup table to facilitate gsi->io_apic lookups
* and to prevent reprogramming of IOAPIC pins (PCI GSIs).
*/
mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
mp_ioapic_routing[idx].gsi_base = gsi_base;
mp_ioapic_routing[idx].gsi_end = gsi_base +
- io_apic_get_redir_entries(idx);
+ io_apic_get_redir_entries(idx);
printk("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
"GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
mp_ioapics[idx].mpc_apicver,
mp_ioapics[idx].mpc_apicaddr,
- mp_ioapic_routing[idx].gsi_base,
- mp_ioapic_routing[idx].gsi_end);
+ mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
nr_ioapics++;
}
-void __init
-mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
+void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
{
struct mpc_config_intsrc intsrc;
- int ioapic = -1;
- int pin = -1;
+ int ioapic = -1;
+ int pin = -1;
- /*
+ /*
* Convert 'gsi' to 'ioapic.pin'.
*/
ioapic = mp_find_ioapic(gsi);
/*
* TBD: This check is for faulty timer entries, where the override
- * erroneously sets the trigger to level, resulting in a HUGE
+ * erroneously sets the trigger to level, resulting in a HUGE
* increase of timer interrupts!
*/
if ((bus_irq == 0) && (trigger == 3))
intsrc.mpc_irqtype = mp_INT;
intsrc.mpc_irqflag = (trigger << 2) | polarity;
intsrc.mpc_srcbus = MP_ISA_BUS;
- intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
- intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
- intsrc.mpc_dstirq = pin; /* INTIN# */
+ intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
+ intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
+ intsrc.mpc_dstirq = pin; /* INTIN# */
Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
- intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
- (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
+ intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
+ (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
mp_irqs[mp_irq_entries] = intsrc;
int es7000_plat;
-void __init mp_config_acpi_legacy_irqs (void)
+void __init mp_config_acpi_legacy_irqs(void)
{
struct mpc_config_intsrc intsrc;
int i = 0;
int ioapic = -1;
#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
- /*
+ /*
* Fabricate the legacy ISA bus (bus #31).
*/
mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
if (es7000_plat == 1)
return;
- /*
- * Locate the IOAPIC that manages the ISA IRQs (0-15).
+ /*
+ * Locate the IOAPIC that manages the ISA IRQs (0-15).
*/
ioapic = mp_find_ioapic(0);
if (ioapic < 0)
return;
intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqflag = 0; /* Conforming */
+ intsrc.mpc_irqflag = 0; /* Conforming */
intsrc.mpc_srcbus = MP_ISA_BUS;
#ifdef CONFIG_X86_IO_APIC
intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
#endif
- /*
+ /*
* Use the default configuration for the IRQs 0-15. Unless
* overridden by (MADT) interrupt source override entries.
*/
struct mpc_config_intsrc *irq = mp_irqs + idx;
/* Do we already have a mapping for this ISA IRQ? */
- if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i)
+ if (irq->mpc_srcbus == MP_ISA_BUS
+ && irq->mpc_srcbusirq == i)
break;
/* Do we already have a mapping for this IOAPIC pin */
if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
- (irq->mpc_dstirq == i))
+ (irq->mpc_dstirq == i))
break;
}
if (idx != mp_irq_entries) {
printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
- continue; /* IRQ already used */
+ continue; /* IRQ already used */
}
intsrc.mpc_irqtype = mp_INT;
- intsrc.mpc_srcbusirq = i; /* Identity mapped */
+ intsrc.mpc_srcbusirq = i; /* Identity mapped */
intsrc.mpc_dstirq = i;
Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
- "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
- (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
- intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
+ "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
+ (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
+ intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
intsrc.mpc_dstirq);
mp_irqs[mp_irq_entries] = intsrc;
* represent all possible interrupts, and IRQs
* assigned to actual devices.
*/
- static int gsi_to_irq[MAX_GSI_NUM];
+ static int gsi_to_irq[MAX_GSI_NUM];
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_gbl_FADT.sci_interrupt == gsi)
if (ioapic_renumber_irq)
gsi = ioapic_renumber_irq(ioapic, gsi);
- /*
- * Avoid pin reprogramming. PRTs typically include entries
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
* with redundant pin->gsi mappings (but unique PCI devices);
* we only program the IOAPIC on the first.
*/
idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
if (idx > 3) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
- ioapic_pin);
+ "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+ ioapic_pin);
return gsi;
}
- if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
+ if ((1 << bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
}
- mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
+ mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1 << bit);
/*
* For GSI >= 64, use IRQ compression
*/
if ((gsi >= IRQ_COMPRESSION_START)
- && (triggering == ACPI_LEVEL_SENSITIVE)) {
+ && (triggering == ACPI_LEVEL_SENSITIVE)) {
/*
* For PCI devices assign IRQs in order, avoiding gaps
* due to unused I/O APIC pins.
}
io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
return gsi;
}
projects / linux-2.6-omap-h63xx.git / commitdiff