On all targets that sucker boils down to memcpy_fromio(sbk->data, from, len).
The function name is highly misguiding (it _never_ does any checksums), the
last argument is just a noise and simply expanding the call to memcpy_fromio()
gives shorter and more readable source. For a lot of reasons it has almost
no remaining users, so it's better to just outright kill it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
count -= semi_count;
memcpy_fromio(skb->data + semi_count, base + ei_status.priv, count);
} else {
- /* Packet is in one chunk -- we can copy + cksum. */
- eth_io_copy_and_sum(skb, base + ring_offset, count, 0);
+ memcpy_fromio(skb->data, base + ring_offset, count);
}
return;
}
memcpy_fromio(skb->data + semi_count,
ei_status.mem + TX_PAGES*256, count);
} else {
- /* Packet is in one chunk -- we can copy + cksum. */
- eth_io_copy_and_sum(skb, start, count, 0);
+ memcpy_fromio(skb->data, start, count);
}
}
mem_on(ioaddr, shared_mem, (ring_offset>>8));
- /* Packet is always in one chunk -- we can copy + cksum. */
- eth_io_copy_and_sum(skb, ei_status.mem + (ring_offset & 0xff), count, 0);
+ memcpy_fromio(skb->data, ei_status.mem + (ring_offset & 0xff), count);
mem_off(ioaddr);
}
memcpy_fromio(skb->data + semi_count, ei_status.mem, count);
} else {
/* Packet is in one chunk. */
- eth_io_copy_and_sum(skb, xfer_start, count, 0);
+ memcpy_fromio(skb->data, xfer_start, count);
}
}
count -= semi_count;
memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count);
} else {
- /* Packet is in one chunk -- we can copy + cksum. */
- eth_io_copy_and_sum(skb, xfer_start, count, 0);
+ memcpy_fromio(skb->data, xfer_start, count);
}
}
count -= semi_count;
memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count);
} else {
- /* Packet is in one chunk -- we can copy + cksum. */
- eth_io_copy_and_sum(skb, xfer_start, count, 0);
+ memcpy_fromio(skb->data, xfer_start, count);
}
outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* Disable memory. */
memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count);
}
} else {
- /* Packet is in one chunk -- we can copy + cksum. */
- eth_io_copy_and_sum(skb, xfer_start, count, 0);
+ memcpy_fromio(skb->data, xfer_start, count);
}
}
memcpy_fromio(skb->data + semi_count, ei_status.mem + TX_PAGES * 256, count);
} else {
/* Packet is in one chunk -- we can copy + cksum. */
- eth_io_copy_and_sum(skb, xfer_start, count, 0);
+ memcpy_fromio(skb->data, xfer_start, count);
}
/* Turn off 16 bit access so that reboot works. ISA brain-damage */
extern void outsw (unsigned long port, const void *src, unsigned long count);
extern void outsl (unsigned long port, const void *src, unsigned long count);
-/*
- * XXX - We don't have csum_partial_copy_fromio() yet, so we cheat here and
- * just copy it. The net code will then do the checksum later. Presently
- * only used by some shared memory 8390 Ethernet cards anyway.
- */
-
-#define eth_io_copy_and_sum(skb,src,len,unused) \
- memcpy_fromio((skb)->data,src,len)
-
/*
* The Alpha Jensen hardware for some rather strange reason puts
* the RTC clock at 0x170 instead of 0x70. Probably due to some
#define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l))
#define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l))
-#define eth_io_copy_and_sum(s,c,l,b) \
- eth_copy_and_sum((s),__mem_pci(c),(l),(b))
-
static inline int
check_signature(const unsigned char __iomem *bus_addr, const unsigned char *signature,
int length)
#define memcpy_fromio(a,c,l) _memcpy_fromio((a),__mem_pci(c),(l))
#define memcpy_toio(c,a,l) _memcpy_toio(__mem_pci(c),(a),(l))
-#define eth_io_copy_and_sum(s,c,l,b) \
- eth_copy_and_sum((s),__mem_pci(c),(l),(b))
-
#elif !defined(readb)
#define readb(c) (__readwrite_bug("readb"),0)
#define writew(v,c) __readwrite_bug("writew")
#define writel(v,c) __readwrite_bug("writel")
-#define eth_io_copy_and_sum(s,c,l,b) __readwrite_bug("eth_io_copy_and_sum")
-
#define check_signature(io,sig,len) (0)
#endif /* __mem_pci */
#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-/*
- * Again, CRIS does not require mem IO specific function.
- */
-
-#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(b),(c),(d))
/* The following is junk needed for the arch-independent code but which
* we never use in the CRIS port
*/
#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
-/*
- * Again, i386 does not require mem IO specific function.
- */
-
-#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(b),(c),(d))
-
/*
* Cache management
*
*/
#define __ISA_IO_base ((char *)(isa_slot_offset))
-/*
- * We don't have csum_partial_copy_fromio() yet, so we cheat here and
- * just copy it. The net code will then do the checksum later.
- */
-#define eth_io_copy_and_sum(skb,src,len,unused) memcpy_fromio((skb)->data,(src),(len))
-
/*
* The caches on some architectures aren't dma-coherent and have need to
* handle this in software. There are three types of operations that
void memcpy_fromio(void *dst, const volatile void __iomem *src, int count);
void memcpy_toio(volatile void __iomem *dst, const void *src, int count);
-/*
- * XXX - We don't have csum_partial_copy_fromio() yet, so we cheat here and
- * just copy it. The net code will then do the checksum later. Presently
- * only used by some shared memory 8390 Ethernet cards anyway.
- */
-
-#define eth_io_copy_and_sum(skb,src,len,unused) \
- memcpy_fromio((skb)->data,(src),(len))
-
/* Port-space IO */
#define inb_p inb
}
#endif
-#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(void __iomem *)(b),(c),(d))
-
/*
* Map in an area of physical address space, for accessing
* I/O devices etc.
*/
#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
-/*
- * Again, x86-64 does not require mem IO specific function.
- */
-
-#define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void *)(b),(c),(d))
-
/* Nothing to do */
#define dma_cache_inv(_start,_size) do { } while (0)
projects / linux-2.6-omap-h63xx.git / commitdiff